Really Right Stuff TQC-14/TFC-14 Mk2 Tripod Review

At RRS TQC-14/TFC-14 Mk2 review time, B&H has 1265 tripods available. While some of that count includes color variations of the same tripod model and many tabletop tripods are included, the selection is still vast and overwhelming. The TQC-14/TFC-14 Mk2 is a small, lightweight model, a category highly-represented in the availability list, and perhaps more than for any other tripod type, design and build quality are especially big differentiators among the available lightweight models.

Let's make this easy: In this extremely-crowded market, the Really Right Stuff TQC-14/TFC-14 Mk2 is right at the top in terms of quality and performance. There are very few other tripods similar in size and weight (or even moderately close to similar) that compete with the TQC-14/TFC-14 Mk2's level of performance, including strength, rigidity, and vibration dampening. With the ultra-high resolution of the current generation of digital cameras, a steady camera is more important than ever and, unfortunately, a significant number of beginning photographers make the mistake of buying low quality on their first tripod purchase. As long as the Really Right Stuff TQC-14/TFC-14 Mk2 is sized adequately for your needs, there is little risk in buying this one.

Really Right Stuff TQC-14/TFC-14 Mk2 Tripod Dimensions, Specs and Weight

Back to Top

Tripods come in all sizes, ranging from tiny tabletop models to super-tall models that can require a step ladder to use. Along with a vast size differential, a large weight differential exists. You can carry the lightest tripod all day and barely know it is there while the heaviest will become burdensome in a very short period of time. Strength and rigidity are often the balancing factor between size and weight. A heavy short tripod is likely much stronger and more-rigid than a super-light tall tripod. So, tripod selection starts with choosing a model that offers the right balance between load capacity, dimensions and weight, along with the features it offers, for the need.

Shown above are top views of the RRS TVC-34, TVC-24L and TQC-14 tripods, illustrating top plate size differences.

The TQC-14 is in the small and light category, but its performance is at least equal to many tripods much larger and heavier. Let's take a look at the Really Right Stuff TQC-14/TFC-14 Mk2 Tripod's measurements and specs.

Specifications	Really Right Stuff TFC-14/TQC-14 Mk2 Tripod
Load Capacity	30 lb	(13.6 kg)
Max Height w/o Column Ext	47.1"	(58.5 cm)
Max Height w/ Column Ext	58.5"	(148.6 cm)
Minimum Height	2.8/3.3"	(7.2/8.4 cm)
Folded Length	17.2/17.7"	(43.7/45.0 cm)
Weight	2.3/2.6 lb	(1.1/1.2 kg)
Measured Weight	2.45/2.60 lb	(1.11/1.18 kg)
Top Plate Diameter	1.6/1.5"	(4.1/3.9 cm)
Chassis Max Width	2.3/2.7"	(5.7/6.9 cm)
Top Leg Section Diameter	1.125"	(2.85 cm)

While a much heavier than stated capacity load can be placed on most quality-rated tripods, the amount of vibration experienced becomes too high at some point. That point is often considerably lower than the load capacity and 1/2 is the fraction frequently used for a low vibration approximation. Don't underestimate the importance of vibration control as there are many causes of vibration including wind.

Using this rule, the Really Right Stuff TQC-14/TFC-14 Mk2 Tripod can be expected useful for about 12.5 lb (5.7kg) loads and that is likely more weight than most of us will be placing on a small tripod such as this one. I'll provide more-specific gear capacity advice later in the review.

The taller a tripod is, the more likely it will accommodate your eye-level height or even your eye-level height with one or more tripod legs positioned downhill below you. The latter is a frequent occurrence for outdoor photographers as well as those shooting from stairways, etc. Most are going to find the TFC-14's height to be short for standing work. With the TQC-14's center column extended, a height comfortable for me (6'/1.8 m) to photograph from a standing position (on a flat surface) is reached. Remember that your tripod head and the camera/lens' tripod-mount-to-viewfinder height add significantly to the tripod's height during use. Also remember that mirrorless cameras may provide less height assistance than DSLR cameras.

While high is good, so is low. With the center column removed, this tripod goes down to nearly ground level and that low height can be ideal for some compositions including for table-top work.

A tripod's folded length is of primary concern for packing and transport. A smaller retracted tripod, regardless of its maximum height capability, consumes less space. This means it is easier to fit into luggage and it does not protrude as far above a backpack. This tripod, especially the TFC model with the narrower apex, folds very compactly.

All other aspects being equal, lighter is better. All other aspects are not always equal and a compromise is always being made to achieve lighter weight. The farther/longer you have to carry a tripod, the more important light weight becomes. Weight does not matter much for studio tripods which are seldom carried for more than minute while multi-day backpackers live at the other end of the spectrum. Those flying are required to comply with luggage weight restrictions and in this case, tripod weight becomes a strong consideration. The RRS TFC-14/TQC-14 Mk2, weighing in at only 2.45/2.60 lb (1.11/1.18 kg) is going to be very appealing to those in the weight-conscious groups.

What the Model Name Means

Back to Top

Tripod manufacturers typically offer many different models and the model name often describes how the model fits into the family. The TQC-14/TFC-14 Mk2 model name breaks down as follows: "T" is for "T"ripod, "QC" is for "Q"uick "C"olumn, "FC" is for "F"ixed "C"olumn, "1" refers to Series "1" (typically on a 00-5 industry scale) and "4" indicates "4" sections per leg.

Here is an expanded Really Right Stuff tripod specification comparison chart, including RRS-revised specifications:

Model	Ser	Sec	Max Height in (cm)		Min Height in (cm)		Folded Length in (cm)		Tripod Weight lb (kg)		Supports lb (kg)
TFC-14 Mk2	1	4	47.1"	(120.0)	2.7"	(6.9)	18.1"	(46.0)	2.46	(1.12)	30	(13.6)
TQC-14 Mk2 *	1	4	58.5"	(148.6)	3.3"	(8.4)	17.7"	(45.0)	2.60	(1.18)	30	(13.6)
Ascend-14	1	4	58.2"	(147.8)	3.7"	(9.4)	17.1"	(43.4)	3.00	(1.40)	30	(13.6)
Ascend-14 Int	1	4	59.9"	(152.1)	5.1"	(13.0)	18.5"	(47.0)	3.20	(1.45)	30	(13.6)
Ascend-14 Long	1	4	66.6"	(169.2)	3.7"	(9.4)	19.6"	(49.8)	3.19	(1.45)	30	(13.6)
Ascend-14 Long Int	1	4	68.9"	(175.0)	5.1"	(13.0)	21.3"	(54.0)	3.38	(1.55)	30	(13.6)
TVC/TFC-23 Mk2 *	2	3	52.6"	(133.6)	3.7"	(9.4)	23.9"	(60.7)	3.30	(1.50)	40	(18.1)
TVC/TFC-24 Mk2	2	4	49.5"	(126.0)	3.6"	(9.3)	19.4"	(49.0)	3.43	(1.50)	55	(24.9)
TVC/TFC-24L Mk2	2	4	66.4"	(169.0)	4.1"	(10.0)	23.3"	(59.0)	3.84	(1.74)	40	(18.1)
TVC-32G Mk2	3	2	13.8"	(35.1)	2.9"	(7.4)	10.1"	(25.7)	2.5	(1.13)	50	(22.7)
TVC/TFC-33S Mk2 *	3	3	50.8"	(129.0)	3.9"	(9.9)	22.8"	(57.9)	3.70	(1.68)	50	(22.7)
TVC/TFC-33 Mk2	3	3	58.2"	(148.0)	4.3"	(11.0)	25.6"	(65.0)	3.72	(1.69)	50	(22.7)
TVC/TFC-34 Mk2	3	4	58.2"	(148.0)	3.7"	(9.4)	20.9"	(53.1)	4.25	(1.93)	50	(22.7)
TVC/TFC-34L Mk2	3	4	68.4"	(173.7)	4.0"	(10.2)	23.9"	(61.0)	4.55	(2.06)	45	(20.4)
TVC-43 *	4	3	62.9"	(159.8)	7.4"	(18.8)	27.4"	(69.6)	6.00	(2.72)	100	(45.4)
TVC-44 *	4	4	74.8"	(190.0)	7.1"	(18.0)	25.9"	(65.8)	6.50	(2.95)	100	(45.4)
TVC-45 Mk2 *	4	5	84.5"	(214.6)	6.8"	(17.3)	24.8"	(63.0)	6.90	(3.13)	100	(45.4)

* Discontinued Note: The RRS TFC 3-series tripods weigh .39 lbs (0.18 kg) less than the comparative TVC models while TFC 2-series tripods weigh 0.18 lbs (0.083 kg) less.

Again, we see that the TQC-14/TFC-14 Mk2 tripods are small and light, positioned on the lowest rung of the RRS standard tripod offerings.

The Chassis

Back to Top

Starting at the top of the tripod, we have the part that holds everything together. In addition to "chassis", this part is referred to as the "apex", "main casting", "spreader", "spider", "collar" and probably many more terms. The chassis' size and strength are keys for the overall strength and rigidity of the tripod. Skimp here and nothing else matters.

The TQC-14/TFC-14 Mk2, pictured to the right above, gets a smartly-designed compact-but-substantial type-3 black anodized, CNC-machined apex. As is common with smaller tripods, a spirit level is not provided, making precise tripod level setup more challenging to obtain.

Perhaps not immediately seeming important to you is the comfort of the tripod in your hand. I carry tripods in my hand a lot and any sharp design features where the chassis meets the top of the legs, the natural carry location, meets not-well-padded parts of the hand. Thus, a smoothly-design leg to chassis transition can make a big difference in the pleasure of using a tripod. The TQC-14/TFC-14 Mk2's relatively thin carbon fiber legs are easy to grasp and comfortable to hold when opened to their first leg angle stop, though the center column pinches modestly if the highest grasping point is utilized on that model. Folding this tripod eliminates the inside finger clearance and grasping around the perimeter of the tripod feels more natural. Holding two legs means the grasped 2-leg surface is slightly large on the TQC model, but especially with the light weight of this tripod, it works well. The perimeter grasp of the TFC-14 is especially comfortable.

A strap is provided under the apex on the TFC-14.

Center Plate or Vertical/Center Column

Back to Top

Most tripods offer a solid top plate, a height-adjustable vertical/center column or the option of either with that last option of course offering the best of both worlds.

With a rapid center column, camera height can be quickly fine-tuned and very high camera positions are enabled without impacting the tripods fully-retracted length. The huge disadvantage of a center column is significantly increased vibration experienced when the column is in a raised position, especially at full height where the reduction in vibration dampening is dramatic. Another disadvantage is that the tripod's minimum height is limited by the length of the center column as it gets in the way when going low.

The TQC-14 Mk2's non-rotating aluminum center column can easily be removed without tools unless the top plate's set screws are tightened, in which case a hex key wrench is required. The top plate is rather narrow and it is easy to apply significant torque to it with a camera. Top plate set screws are most-typically used to lock a tripod head in place, but in this case, the set screws are used to secure the top plate onto the rapid column, preventing it from twisting loose in use. In addition to being completely removed, the TQC-14's rapid column can be installed upside down for a potentially right-on-the-ground camera position.

The choice of aluminum for the rapid column is an interesting one. Aluminum is heavier than carbon fiber, but the difference would only be slight in this small part. More advantageous is aluminum's lower friction coefficient, allowing it to slide more smoothly.

RRS provides a strong hook on the bottom of the rapid column, permitting stabilizing weight to be used, or just giving you somewhere to hang your hat. When the column is reversed, the hook is located on the top, which facilitates hanging the tripod somewhere.

A large wing-style rapid column lock is provided just above the tripod's apex. This lock works very smoothly and the column locks tightly. The space between the rapid column lock wings limits the usable tripod head base size, though most will not find this dimension limiting even when using a one size larger than ideal head on this tripod.

The TFC-14 Mk2 model omits the column feature in favor of a fixed apex. Without a center column getting in the way, the TFC-14 can go very low.

The TQC-14 Mk2 tripod head mount thread size is 3/8"-16, fitting most models, while the TFC-14 Mk2 has a reversible 1/4"-20 and 3/8"-16 male stud that can be completely removed for a female 1/4"-20 fitting, allowing or maximum flexibility in mounting options.

Leg Angle Stops

Back to Top

Unless you are only going to use the tripod on a completely flat surface, typically a floor, you probably want a tripod model with independent leg spread. You want your tripod legs to open at various angles to accommodate whatever terrain you may encounter.

Models having independent leg spread feature angle stops just above the leg pivot axles and this seemingly basic design feature plays an important role in the tripod's functionality. One of the primary tripod design observations to make is how strongly the leg angle locks transition into the stops provided on the chassis. Is the stop a weak little tab that protrudes from the chassis? The latter invites failure and consider that failure may mean your camera and lens hitting the ground. Or, is there solid material between the chassis and the leg lock?

The RRS TQC-14/TFC-14 Mk2's small chassis dimension limits the strength available for leg angle stops. But, this tripod's smart design directs the pressure coming through these stops directly into a substantial part of the chassis for a strong, rigid hookup.

Most tripod models offer multiple stop angles and the specific angles offered are seldom a strong differentiator between models. But, the small "Traveler" tripod models often feature only two leg angles vs. the three found on the TQC-14. Another differentiator is ratcheting locks that snap into the locked position when the direction is reversed from outward to inward. The RRS models have those.

Yet another differentiator can be the angle locks' ease of use. The TQC-14/TFC-14 Mk2 leg locks are designed just like its larger counterparts, pulling out to enable repositioning. The locks are nicely shaped and easy to use. I like this design a lot and find them easier to use than the spring-loaded, side-pivoting traveler-style leg locks.

Don't like the force required to spread the legs? Loosen or tighten the axle bolts with the included wrench. Brass bushings keep leg angle movements very smooth.

Legs

Back to Top

Like the chassis, the legs are a critical part of a tripod. Perhaps the primary consideration for tripod legs is what they are constructed of, with aluminum and carbon fiber being the two most common options.

What are the advantages of a carbon fiber tripod? Carbon fiber models are typically lighter than equally-weight-rated aluminum models and that is often a primary consideration for photographers. A huge carbon fiber advantage is its ability to better dampen vibrations. Carbon fiber does not transfer heat as easily as aluminum and if using the tripod in cold temperatures, you will prefer holding the carbon fiber model.

What are the advantages of an aluminum tripod? Aluminum is a great material and its primary advantage in tripod form is low cost. Aluminum generally has a lower friction coefficient than carbon fiber, making it slide more easily for height adjustment.

Aluminum dents and bends while carbon fiber breaks. Neither is good and the latter is less likely, but dented and/or bent may remain usable. Carbon fiber is my nearly-exclusive choice.

Another important aspect of tripod selection is leg section length and the number of sections per leg. Roughly, the number of leg sections times the length of the sections (minus some overlap plus the chassis height) determines the maximum height of the tripod. And, the length of the leg sections is a strong factor in both a tripod's minimum height and its retracted length.

Because there is one leg lock on each leg section joint, tripods with more leg sections have more locks and for that reason, they generally cost modestly more. Increasing the number of leg sections also increases the setup and take-down time. With each leg section having a smaller diameter than the one above it, tripods with more leg sections generally have a narrower lower leg section than the equivalent tripod with fewer leg sections.

General-purpose tripods are most frequently offered in 3 or 4 leg section models and I usually choose 4-section legs for my primary tripods. Four leg sections give me a relatively-compact retracted size that is especially appreciated when traveling with a maximum height that works well for me. Though an issue in the past, thinner lower leg section stability is not an issue in high-quality current models.

The RRS TQC-14/TFC-14 Mk2 gets carbon fiber legs and they are impressively-rigid for their small size. The legs are sharp-looking and smooth-operating.

Note that RRS' Mk2 tripods feature a small slit in the back of each leg cup that allows air to easily escape, making the tripod leg easier to extend and retract.

Another great feature on these tripods is that the legs do not over-retract. Simply fold the legs until they stop and they will be in the perfectly folded position.

Leg Extension Locks

Back to Top

Most tripods have multiple legs sections, allowing them to be set up at various heights or retracted compactly. This means that leg section locks are needed and the first choice is typically between lever or flip-locks and twist locks. I've used both and much-prefer the twist locks for many reasons, including their faster and quieter operation. The TQC-14/TFC-14 Mk2 has awesome short-throw (1/8 turn?) twist locks that work as well as any I've used. It is easy to feel the resistance change when a leg section unlocks, allowing avoidance of turning the lock farther than necessary, maintaining the short-throw feature in use. After using these locks, it is hard to go back to lesser versions.

Want to know how strong a tripod's leg locks are? Fully extend the legs, tighten the leg locks and, while keeping the legs together (not spread), pull straight down on the legs, gradually with significant weight. Note that exceeding the weight limit of a tripod could break it, but quality leg locks will not retract under the pressure of my weight (170 lb / 77 kg). The Really Right Stuff TQC-14/TFC-14 Mk2 Tripod's leg extension locks make the grade, impressively holding my full weight when set up with the normal leg spread and even a single TQC-14/TFC-14 Mk2 leg will vertically hold my weight, showing the extreme locking strength of these leg locks. I have confidence in these legs supporting my expensive gear and am comfortable recommending that you do the same. I will also rely on the tripod for moderate support when traversing difficult terrain.

Important to me is that the leg sections do not rotate when unlocked, allowing any individual leg lock to be tightened before others. Most quality tripods produced today support this feature and the Really Right Stuff TQC-14/TFC-14 Mk2 Tripod checks that feature box.

Lateral rigidity is a primary responsibility for the leg section locks. Applying lateral pressure (but not too much as this is a breakage risk) to fully locked legs will quickly illuminate any play and/or flex that exists. Also, with modest pressure on the top plate, a tap to the middle of the extended leg will cause visible vibration. How quickly that vibration dissipates is the observation to make during this test. The TQC-14/TFC-14 Mk2's legs are laterally very rigid and vibrations settle out very quickly.

New on the Mk2 models are the O-rings in the leg locks, aiding in keeping the locking threads clean.

Tripod Feet

Back to Top

The tripod must rest on something and we logically call that something "feet". The RRS TQC-14/TFC-14 Mk2 tripod's removable rubber feet feature a teardrop-shape that helps keep the legs off of the ground even when fully splayed.

Gear Capacity Recommendations

Back to Top

As discussed earlier, the load capacity of this tripod is high enough to support nearly any camera and lens. But, that doesn't mean it will hold that load without vibration; vibrations are usually a limiting factor and vibrations cannot always be tolerated.

To establish my comfort level, I used a Canon EOS 5Ds R mounted to a Canon EF 600mm f/4 L IS II (weighs 12 lb / 5.4 kg) and a Canon EF 100-400mm f/4.5-5.6L IS II lens (weighs 6.3 lb / 2.9 kg). The lenses were mounted with a known solid ball head and with all adjustments firmly tightened.

While the TQC-14/TFC-14 Mk2 had no trouble supporting the 600mm combination at any height, if no vibrations could be tolerated, I would only want to support this lens with the TFC-14 or the TQC-14 with the rapid column fully retracted. Vibrations quickly increase as the center column extended until even a light wind would cause continuous vibrations at full extension. With legs fully retracted, the TQC-14 provided rock-solid support for even the 600mm combo.

The 100-400mm lens is a better size fit for the TQC-14/TFC-14 Mk2 (the tail isn't wagging the dog so-to-speak) and vibrations experienced even at 400mm were considerably less than with the big 600 mounted. Still, the vibrations at full-rapid-column-extension lasted very noticeably longer than with the rapid column retracted. This is normal and this is why I avoid using rapid columns whenever possible. At least I avoid using fully-extended rapid columns as the amount of vibration increases with the amount of extension. I'm very comfortable using lenses up to 100-400mm in size and focal length, including the 70-200mm f/2.8 options, on the TQC-14/TFC-14 Mk2. Under strong winds and other adverse conditions, you will likely want to use shorter tripod heights when using the longer focal lengths.

As you likely expected by now, normal and wide-angle lenses, those most commonly used on tripods of this size and weight, are easily within the TQC-14/TFC-14 Mk2's load-bearing capabilities, though at full rapid column extension, the setup is still susceptible enough to vibrations that good technique must be utilized.

Recommended Tripod Head

Back to Top

The right tripod head can make a huge difference in both your tripod use experience and in your results. Do not let your head be the limiting factor. A small, light head is typically desired for a small, light tripod and the perfect choice is the Really Right Stuff BH-30 Ball Head, shown on the TQC-14 above to the right, is the perfect choice. If a modestly larger head is desired, the Really Right Stuff BH-40 Ball Head, shown above in the middle and below on the TQC-14/TFC-14 Mk2, is another great choice, with its base just fitting between the rapid column lock wings.

Here is an image of the TFC-14 with a BH-30 mounted.

Price and Value

Back to Top

Cheap, low-quality tripods are usually a waste of money that will leave you disillusioned as to what a tripod can do for you and will dissuade you from using it at all. Using a high-quality model will potentially greatly increase your image quality and it will be a pleasure to use and carry with you. Photographers that wished they would have purchased a lower-grade tripod model are rare (I have not met one). RRS tripods are not cheap, but they are in an elite class, among the best available.

Really Right Stuff defines customer service excellence. It is very easy to reach an RRS representative via email, chat, or phone and this company stands behind their products. RRS offers a limited 5-yr warranty on the TQC-14/TFC-14 Mk2 and I expect that this tripod will last a lifetime.

The Really Right Stuff TQC-14/TFC-14 Mk2 Tripod used for this review was purchased retail/online.

Alternative Tripods

Back to Top

The primary competitor to the RRS TQC-14 is its sibling, the fixed-column RRS TFC-14. To gain the extra 10.9" (27.7mm) when needed, opt for the quick-column version. The TFC-14's advantages include a lower price, a modestly-lighter weight, and a narrower folded size. Removing the TQC-14's rapid column essentially equalizes the weight issue. The lower price remains a reason to get the TFC variant.

Model

Ser

Sec

Max Height

Min Height

Folded Length

Tripod Weight

Supports

RRS TFC-14

1

4

47.6"

(120.9cm)

2.8"

(7.1cm)

17.2"

(43.7cm)

2.3 lb

(1.04kg)

25 lb

(11.3kg)

RRS TQC-14

1

4

58.5"

(148.6cm)

3.3"

(8.4cm)

17.7"

(45.0cm)

2.6 lb

(1.18kg)

25 lb

(11.3kg)

GT0545T

0

4

48.23"

(122.5cm)

7.87"

(20.0cm)

14.37"

(36.5cm)

1.98 lb

(0.90kg)

22.05 lb

(10.0kg)

GT1545T

1

4

60.24"

(153.0cm)

8.66"

(22.0cm)

16.73"

(42.5cm)

2.34 lb

(1.06kg)

22.05 lb

(10.0kg)

GT1555T

1

5

54.33"

(138.0cm)

7.87"

(20.0cm)

13.98"

(35.5cm)

2.27 lb

(1.03kg)

22.05 lb

(10.0kg)

GT2545T

2

4

60.83"

(154.5cm)

8.66"

(22.0cm)

17.52"

(44.5cm)

2.95 lb

(1.34kg)

26.46 lb

(12.0kg)

The other tripod line that has my very strong interest is the Gitzo Traveler Series tripods, more specifically the Gitzo GT1555T Traveler Carbon Fiber Tripod. I bought and owned one of these for several months and it is a great option, offering very impressive strength and rigidity for its size. Its smaller size, especially when folded, is the primary advantage it has over the RRS TQC-14. Keep in mind that the Gitzo GH1382TQD Ball Head fits entirely within the legs of the GT1555T, making the with-heads comparison favor the Gitzo even more strongly.

This decision was not an easy one. I've used the Gitzo traveler models for many years. They are great quality tripods and I highly recommend them. But, in the end, I decided to go with the RRS model. The RRS is slightly more solid with a lower profile mounting platform over the apex, leading to a more solid setup that is also slightly less inclined to tip over. I also preferred the TQC-14/TFC-14 Mk2's more-standard leg locks and the additional angle stop.

While the TQC-14 is perfect for the lighter-weight, compact tripod needs, I generally advise on getting at least a 2-series model and, better-yet, a 3-series model for general-purpose use. The RRS TFC-14 is shown inside of the TVC-34L above.

I often travel with my compact tripod serving as backup, for a second setup at times and often for longer hikes. Really nice is that the TQC-14/TFC-14 Mk2 stores very neatly inside the folded legs of the TVC-34, with rubber protecting all contact points.

Summary

Back to Top

I've carried the Really Right Stuff TQC-14/TFC-14 Mk2 on numerous outings, including for entire days.

This tripod is easy to carry and it performs awesomely. If there is room for a high-performing compact, lightweight tripod in your kit, the Really Right Stuff TQC-14/TFC-14 Mk2 has your name on it.