Nikon Firmware Updates (Page 6)
Nikon has updated the COOLPIX S3200's firmware to version 1.1.
From Nikon:
Modifications enabled with this version:
- When the Charging AC Adapter EH-69P and USB Cable UC-E6 were connected to the camera to charge the Rechargeable Li-ion Battery EN-EL19 with the EN-EL19 at or very near full exhaustion, the battery sometimes could not be charged. This issue has been resolved.
Download: Nikon COOLPIX S3200 Firmware 1.1 - Windows | Macintosh
From Nikon:
COOLPIX L28 Firmware 1.1
Modifications enabled in this version
- An issue that, in some rare cases, prevented the camera from turning on, or prevented operation, has been resolved.
Download
COOLPIX L28 Firmware 1.1 - Windows | Macintosh
COOLPIX S3400 Firmware 1.1
Modifications enabled in this version
- An issue that, in some rare cases, prevented the camera from turning on, or prevented operation, has been resolved.
Download
COOLPIX S3400 Firmware 1.1 - Windows | Macintosh
COOLPIX S3500 Firmware 1.1
Modifications enabled in this version
- An issue that, in some rare cases, prevented the camera from turning on, or prevented operation, has been resolved.
Download
COOLPIX S3500 Firmware 1.1 - Windows | Macintosh
COOLPIX S4300 Firmware 1.2
Modifications enabled in this version
- An issue that, in some rare cases, prevented the camera from turning on, or prevented operation, has been resolved.
Download
COOLPIX S4300 Firmware 1.1 - Windows | Macintosh
COOLPIX S4400 Firmware 1.1
Modifications enabled in this version
- An issue that, in some rare cases, prevented the camera from turning on, or prevented operation, has been resolved.
Download
COOLPIX S4400 Firmware 1.1 - Windows | Macintosh
COOLPIX S5200 Firmware v1.1
Modifications enabled in this version
- The Wireless Mobile Utility's Take photos mode can now be used to take pictures with the camera (download pictures as they are taken), enabling shooting by pressing the camera's shutter-release button directly. The Wireless Mobile Utility, installed on a smart device, can now be used to automatically download pictures taken with the camera and saved to the camera's memory card to the smart device. The Wireless Mobile Utility Ver. 1.2.0 or later is required to use this function.
- An issue that, in some rare cases, prevented the camera from turning on, or prevented operation, has been resolved.
Download
COOLPIX S5200 Firmware v1.1 - Windows | Macintosh
COOLPIX S6400 Firmware v1.1
Modifications enabled with this version:
- An issue that, in some rare cases, prevented the camera from turning on, or prevented operation, has been resolved.
Download
COOLPIX S6400 Firmware v1.1 - Windows | Macintosh
COOLPIX S6500 Firmware v1.1
Modifications enabled with this version:
- The Wireless Mobile Utility's Take photos mode can now be used to take pictures with the camera (download pictures as they are taken), enabling shooting by pressing the camera's shutter-release button directly. The Wireless Mobile Utility, installed on a smart device, can now be used to automatically download pictures taken with the camera and saved to the camera's memory card to the smart device. The Wireless Mobile Utility ver. 1.2.0 or later is required to use this function.
- An issue that, in some rare cases, prevented the camera from turning on, or prevented operation, has been resolved.
Download
COOLPIX S6500 Firmware v1.1 - Windows | Macintosh
COOLPIX S9300 Firmware v1.3
Modifications enabled with this version:
- An issue that, in some rare cases, prevented the camera from turning on, or prevented operation, has been resolved.
Download
COOLPIX S9300 v1.3 - Windows | Macintosh
Adorama carries the Nikon COOLPIX L28, S6500, S5200 & S3500 digital cameras.
From Nikon:
Modifications enabled with this firmware upgrade
- When NRW (RAW) images recorded in vertical (portrait) orientation at a Record orientation setting of Auto were played back, images did not rotate as the camera was rotated, even when Rotate tall was set to On. This issue has been resolved.
- When images captured in vertical (portrait) orientation at a Record orientation setting of Auto were played back, and playback zoom was applied with the camera rotated for vertical display with Rotate tall set to On, certain operations caused images to display irregularly or in the incorrect orientation. This issue has been resolved.
- When using the rotary multi selector to display the next image from the camera's memory, or a memory card, containing both photos and movies, operation sometimes seemed to stick and continuously advanced through images. This issue has been resolved.
- After shooting using the self-timer with Auto bracketing set to Tv or Sv with Self-timer: after release set to Stay in self-timer mode, autofocus stopped functioning. This issue has been resolved.
- When Image quality was set to NRW (RAW), NRW (RAW) + Fine, NRW (RAW) + Normal, or NRW (RAW) + Basic, and Continuous was set to Continuous, noise occurred in photos taken using the self-timer at a shutter speed of 1/4 s or slower with Long exposure NR set to On. Similarly, noise also occurred in photos taken using the self-timer at a shutter speed slow enough to activate long exposure NR with Long exposure NR set to Auto. This issue has been resolved.
Installation Instructions: Windows | Macintosh
Download:
COOLPIX P7100 Firmware 1.1: Windows | Macintosh
Amazon carries the Nikon COOLPIX P7100 digital camera.
From Nikon:
Modifications enabled with this upgrade of firmware, release date June 25, 2013
- When images captured using a flash in Manual or Repeating flash mode were played back with the “Overview” display enabled, flash output level was displayed in the flash compensation portion of the display. This issue has been resolved.
- When the AE/AF lock button was pressed with Special Effects mode enabled, Selective Color selected, and the view magnified with selective color options displayed in live view, the image did not change while live view was active. This issue has been resolved.
- An issue that caused the Viewfinder Virtual Horizon to freeze when certain operations were performed has been resolved.
- When images captured with white balance bracketing enabled were played back, a white balance fine-tuning value of 9 (steps) was displayed even for images captured with a fine-tuning value of 10 (steps) applied. This issue has been resolved.
- An issue that prevented cursor movement when certain operations were performed in calendar playback mode has been resolved.
- The size of some text displayed in calendar playback mode has been modified.
- Display of focal lengths in 35mm [135] format recorded in image Exif data has been corrected.
- With movie recording at 1920 × 1080/24p in M exposure mode, subject brightness did not change, even when shutter speed was adjusted. This issue has been resolved.
Confirming the firmware version:
- Turn on the D7100
- Press the MENU button and select Firmware Version from the setup menu. The camera's firmware version will be displayed.
- Turn off the D7100
Basic Upgrade instructions:
- Create a new folder with an appropriate name on your computer.
- Choose the correct download below for the computer system you are using, and save the download to the folder created in step 1.
- Run the downloaded file to create the folder titled D7100Update, containing the following file: D7100_0101.bin
- Format an approved memory card in the camera, then remove .
- Copy the D7100_0101.bin file to the top level of the memory card using a memory card reader or similar device, do not copy the file into any folder on the memory card.
- Insert memory card into the cameras memory card slot, and switch on.
- Select Firmware Version from the setup menu and follow the instructions displayed to upgrade the camera's firmware.
- DO NOT switch off the camera at any time during the update, doing so may result in the need for service.
- After the upgrade is complete, trun the camera off and remove the memory card.
- Check the cameras firmware version to be sure it completed.
- Format memory card in camera for use.
* - Firmware updates can be performed for you at authorized Nikon service centers.
B&H carries the Nikon D7100 DSLR camera.
Nikon has published firmware updates for the Nikon 1 J1, J2, J3, V1 and S1 mirrorless cameras in addition to a firmware update for the Mount Adapter FT1.
Nikon 1 J1
This service provides software for upgrading Nikon 1 J1 firmware to A:1.30 / B:1.30.
Modifications enabled with this firmware upgrade
- Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added.
- To use this function, the Mount Adapter FT1 firmware must be version 1.10, which supports this function.
- Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
- The following changes to playback zoom for images captured in MF (manual focus) focus mode have been applied.
- 1× magnification has been added.
- The amount of time allowed to pass before normal display is restored when no operations are performed after playback zoom is applied has been reduced.
- When shooting in Electronic (Hi) release mode at 10 fps using the Mount Adapter FT1, the shutter speed displayed with a half press of the shutter-release button and that displayed when the shutter-release button was fully pressed differed. This issue has been resolved.
Nikon 1 J2
This service provides software for upgrading Nikon 1 J2 firmware to A:1.10 / B:1.10.
Modifications enabled with this firmware upgrade
- Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added.
- To use this function, the Mount Adapter FT1 firmware must be version 1.10, which supports this function.
- Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
- The following changes to playback zoom for images captured in MF (manual focus) focus mode have been applied.
- 1× magnification has been added.
- The amount of time allowed to pass before normal display is restored when no operations are performed after playback zoom is applied has been reduced.
Nikon 1 J3
This service provides software for upgrading Nikon 1 J3 firmware to A:1.10 / B:1.10.
Modifications enabled with this firmware upgrade
- Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added.
- To use this function, the Mount Adapter FT1 must be firmware version 1.10, which supports this function.
- Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
- 1× magnification has been added to playback zoom ratios for images captured in MF (manual focus) focus mode.
Nikon 1 V1
This service provides software for upgrading Nikon 1 V1 firmware to A:1.30 / B:1.30.
Modifications enabled with this firmware upgrade
- Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added.
- To use this function, the Mount Adapter FT1 firmware must be version 1.10, which supports this function.
- Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
- The following changes to playback zoom for images captured in MF (manual focus) focus mode have been applied.
- 1× magnification has been added.
- The amount of time allowed to pass before normal display is restored when no operations are performed after playback zoom is applied has been reduced.
- When shooting in Electronic (Hi) release mode at 10 fps using the Mount Adapter FT1, the shutter speed displayed with a half press of the shutter-release button and that displayed when the shutter-release button was fully pressed differed. This issue has been resolved.
- The precision of time synchronization when the GPS Unit GP-N100 is attached to the camera and the Use GPS to set clock option is set to Yes has been increased. However, errors in time synchronization using GPS cannot be completely eliminated. Please update GP-N100 firmware to Ver. 1.02 , which supports this improvement.
Nikon 1 S1
This service provides software for upgrading Nikon 1 S1 firmware to A:1.10 / B:1.10.
Modifications enabled with this firmware upgrade
- Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added.
To use this function, the Mount Adapter FT1 must be Ver. 1.10, which supports this function. - Support for the 1 NIKKOR 32mm f/1.2, equipped with a focusing ring, has been added.
- 1× magnification has been added to playback zoom ratios for images captured in MF (manual focus) focus mode.
Mount Adapter FT1
This service provides software for upgrading Mount Adapter FT1 firmware to 1.10.
IMPORTANT: To update 1 NIKKOR lens or Mount Adapter firmware using the Nikon 1 V2, please be sure to update Nikon 1 V2 firmware to A: and B: 1.10 or later FIRST. Do Not use a Nikon 1 V2 with A: and B: 1.00 firmware to update a 1NIKKOR lens or the Mount Adapter FT1 as they will not be accurately upgraded and doing so may prevent their use. If you have already upgraded either a 1 NIKKOR lens or the Mount Adapter FT1 using a Nikon 1 V2 firmware version 1.00, then please consult the Nikon Service Department.
Modifications enabled with this firmware upgrade
- Support for AF-C (Continuous AF) focus mode when the Mount Adapter FT1 is used with AF-S lenses has been added.
- Camera firmware versions that support this function are as follows.
- When updating both the camera and FT1's firmware, be sure to update the camera's firmware before updating the FT1 firmware.
- Nikon 1 V2 A/B firmware Ver. 1.10
- Nikon 1 V1 A/B firmware Ver. 1.30
- Nikon 1 J3 A/B firmware Ver. 1.10
- Nikon 1 J2 A/B firmware Ver. 1.10
- Nikon 1 J1 A/B firmware Ver. 1.30
- Nikon 1 S1 A/B firmware Ver. 1.10
FT1 Firmware Update Instructions: English | Spanish
B&H carries Nikon 1 Mirrorless Cameras and the FT1 Mount Adapter.
Nikon has published firmware updates for the D700, D300 & D300s DSLR cameras. The updates add support for the AF-S NIKKOR 800mm f/5.6E FL ED VR lens.
From Nikon:
Modifications enabled with this upgrade of firmware, release date May 21, 2013
- Support for the AF-S NIKKOR 800mm f/5.6E FL ED VR has been added.
Installation Instructions
Nikon D700 - Windows | Macintosh
Nikon D300* - Windows | Macintosh
Nikon D300s - Windows | Macintosh
* NOTE: Installation instructions for the D300 are identical to the instructions for the D300s.
Firmware Downloads
Nikon D700 Firmware A:1.04 / B:1.03 - Windows | Macintosh
Nikon D300 Firmware: A/B 1.11* - Windows | Macintosh
Nikon D300s Firmware: A/B 1.02** - Windows | Macintosh
* NOTE: This update is for the D300 model only, and not the D300s. Do not attempt to upgrade the D300 with this firmware.
** NOTE: This update is for the D300S model only, and not the D300. Do not attempt to upgrade the D300 with this firmware.
B&H carries the Nikon D300s DSLR camera.
From Nikon:
Nikon COOLPIX P7700 firmware v1.2 is now available for download.
Modifications enabled with this firmware upgrade
- When shooting with shooting mode set to M (manual) with Flash, and the ISO sensitivity set to Auto, ISO 80-200, ISO 80-400, or ISO 80-800, ISO sensitivity was sometimes not locked at ISO 80 and a different ISO sensitivity was sometimes applied. This issue has been resolved.
Download
Nikon COOLPIX P7700 Firmware 1.2 - Windows | Macintosh
Installation Instructions (PDF) - Windows | Macintosh
B&H carries the Nikon COOLPIX P7700.
From Nikon:
Modifications enabled with this firmware upgrade
- Display accuracy for the virtual horizon has been increased according to the direction in which the camera is pointed.
- The interval between shots with uninterrupted shooting when Auto bracketing is set to Exposure bracketing has been reduced.
- An issue that prevented shutter speeds slower than one second for the second and subsequent shots when shooting with Auto bracketing set to Exposure bracketing has been resolved.
Download the COOLPIX P7700 Firmware 1.1 Update: Windows | Macintosh
Installation instructions (PDF): Windows | Macintosh
B&H carries the Nikon COOLPIX P7700 Digital Camera.
From Nikon:
Support Article
My COOLPIX camera battery will not charge - Firmware Updates available
How to identify the camera battery not charging
The cameras listed below are all designed to charge the battery in-camera by connecting an AC adapter to the cameras USB connector. If the battery is fully exhausted due to a long period of inactivity, sometimes the battery can fail to charge. With the AC adapter connected to the cameras USB connector the battery charge lamp will flash green if charging is in progress. If charging is not possible the battery charge lamp will not light at all.
The battery charge lamp is usually located on the back of the camera indicated with a charge/flash symbol.
Camera Firmware Updates available
Nikon have released camera Firmware Updates for the following affected COOLPIX cameras. We recommend performing the update as soon as possible to avoid this problem should your camera not be used for long periods.
- COOLPIX S9300 Firmware Update v1.2
- COOLPIX S9200 Firmware Update v1.2
- COOLPIX S6300 Firmware Update v1.1
- COOLPIX S6200 Firmware Update v1.1
- COOLPIX S6150 Firmware Update v1.1
- COOLPIX S6100 Firmware Update v1.1
- COOLPIX S4300 Firmware Update v1.1
- COOLPIX S4150 Firmware Update v1.2
- COOLPIX S4000 Firmware Update v1.3
- COOLPIX S3300 Firmware Update v1.1
- COOLPIX S3100 Firmware Update v1.1
- COOLPIX S3000 Firmware Update v1.2
- COOLPIX S2600 Firmware Update v1.1
- COOLPIX S2550 Firmware Update v1.1
- COOLPIX S2500 Firmware Update v1.1
Important Note
Make sure the battery is fully charged before perfoming a Firmware Update, alternatively power the camera from an AC adapter unit. If you perform the update with a battery which is not fully charged the camera may stop working during update which will cause further problems.
My camera has no power, I can't update the Firmware!
If your camera will not charge the battery, try the following workarounds which may recover the situation enough to allow the battery to continue charging.
- Remove the memory card from the camera and then reconnect the AC adapter to the cameras USB connector. In some cases the battery will now charge correctly.
- A Nikon battery charger is available as an optional sales item for most COOLPIX cameras. If you have access to an external Nikon battery charger, remove the battery from the camera and charge it in the battery charger. In some cases this may start to charge the battery correctly. Click here for battery charger compatibility list.
If these measures fail to charge the camera battery, contact the Nikon Support Centre for further advice.
Update: Firmware upgrades for the Nikon D7000 and D3200 have been added.
From Nikon:
Nikon D600
This is the D600 C: 1.01 firmware upgrade download - Please review the information provided, and click the appropriate download link below.
Modifications enabled with this upgrade of firmware, release date April 2, 2013
- Support for the AF-S NIKKOR 800mm f/5.6E FL ED VR has been added.
- Subject tracking performance in AF-C (continuous-servo autofocus) autofocus mode with framing using the viewfinder has been improved.
- Frame output size has been changed from 95% to 100% when movie live view display is changed to "Information off" and an HDMI-compatible device is connected.
- An issue that caused the right edges of images to be somewhat white when captured at an Image area setting of DX (24x16) 1.5x with Active D-Lighting set to Off has been resolved.
- When the camera's shutter-release button was pressed repeatedly for uninterrupted shooting with the "Record to:" option in Camera Control Pro 2's Storage tab set to "PC+CARD", the camera would stop responding with displaying "Err" in its control panel. This issue has been resolved.
- In some very rare cases, colors would change with shooting when white balance was set to a specific color temperature, as with Preset manual or Choose color temp. This issue has been resolved.
Download the D600 C: 1.01 Firmware Upgrade: Windows | Macintosh
Installation instructions (English, PDF): Windows | Macintosh
Nikon D800/D800E
This is the D800/D800E A:1.01 / B:1.02 firmware upgrade download - Please review the information provided, and click the appropriate download link below.
Modifications enabled with this upgrade of firmware, release date April 2, 2012
- Support for the AF-S NIKKOR 800mm f/5.6E FL ED VR has been added.
- Subject tracking performance in AF-C (continuous-servo autofocus) autofocus mode with framing using the viewfinder has been improved.
- Gamut for Adobe RGB images displayed in the camera's monitor has been changed. This enables more vivid display of images.
- With live view photography in [M] (Manual) exposure mode, exposure preview was always on. This issue has been resolved.
- In some very rare cases when certain memory cards were used, movie recording would stop, even when the time remaining display indicated remaining recording time. This issue has been resolved.
- With shooting at an image quality setting of TIFF (RGB) and an image size setting of Small, the right edge of images contained a purple line. This issue has been resolved.
- In some rare cases, images recorded in JPEG format could not be opened by some software applications. This issue has been resolved.
- In some very rare cases, colors would change with shooting when white balance was set to a specific color temperature, as with Preset manual or Choose color temp. This issue has been resolved.
Download the D800 A:1.01 / B:1.02 Firmware Upgrade: Windows | Macintosh
Installation instructions (English, PDF): Windows | Macintosh
Download the D800E A:1.01 / B:1.02 Firmware Upgrade: Windows | Macintosh
Installation instructions (English, PDF): Windows | Macintosh
Nikon D4
This is the D4 A:1.05 / B:1.03 firmware upgrade download - Please review the information provided, and click the appropriate download link below.
Modifications enabled with this upgrade of firmware, release date April 2, 2013
- Support for the AF-S NIKKOR 800mm f/5.6E FL ED VR has been added.
- Auto white balance performance has been improved.
- Images are sharper and appear more three dimensional.
- With live view photography in [M] (Manual) exposure mode, exposure preview was always on. This issue has been resolved.
- With shooting at an image quality setting of TIFF (RGB) and an image size setting of Small, the right edge of images contained a purple line. This issue has been resolved.
- In some rare cases, images recorded in JPEG format could not be opened by some software applications. This issue has been resolved.
- In some very rare cases, colors would change with shooting when white balance was set to a specific color temperature, as with Preset manual or Choose color temp. This issue has been resolved.
Download the D4 A:1.05 / B:1.03 Firmware Upgrade: Windows | Macintosh
Installation instructions (English, PDF): Windows | Macintosh
Nikon D3 / D3X / D3S / D7000
This is the D3 A:2.03 / B:2.03, D3X A:1.01 / B:1.02, D3S A:1.02 / B:1.02, and D7000 A:1.03 / B:1.04 firmware upgrade download - Please review the information provided, and click the appropriate download link below.
Modifications enabled with this upgrade of firmware, release date April 2, 2012
- Support for the AF-S NIKKOR 800mm f/5.6E FL ED VR has been added.
Download the D3 A:2.03 / B:2.03 Firmware Upgrade: Windows | Macintosh
Installation instructions (English, PDF): Windows | Macintosh
Download the D3X A:1.01 / B:1.02 Firmware Upgrade: Windows | Macintosh
Installation instructions (English, PDF): Windows | Macintosh
Download the D3S A:1.02 / B:1.02 Firmware Upgrade: Windows | Macintosh
Installation instructions (English, PDF): Windows | Macintosh
Download the D7000 A:1.03 / B:1.04 Firmware Upgrade: Windows | Macintosh
Installation instructions (English, PDF): Windows | Macintosh
Nikon D3200
This is the D3200 C:1.01 firmware upgrade download - Please review the information provided, and click the appropriate download link below.
Modifications enabled with this upgrade of firmware, release date April 2, 2012
- The following functions have been changed with shooting using the Wireless Mobile Utility.
- When the camera's shooting mode is set to Auto or Auto (flash off), it now operates in Auto or Auto (flash off) mode. Prior to this upgrade, the camera functioned in [P] (Programmed auto) exposure mode.
- Live view can now be initiated even when the camera is set to "Auto" or "No flash" in GUIDE mode.
- In some very rare cases when certain memory cards were used, movie recording would stop, even when the time remaining display indicated remaining recording time. This issue has been resolved.
- In some very rare cases, colors would change with shooting when white balance was set to a specific color temperature, as with Preset manual or Incandescent. This issue has been resolved.
Download the D3200 C:1.01 Firmware Upgrade: Windows | Macintosh
Installation instructions (English, PDF): Windows | Macintosh
B&H carries the Nikon D600, D800/D800E, D4, D3x, D7000, and D3200 DSLR cameras.
From Nikon:
Modifications enabled with this firmware upgrade
- Support for the D7100 has been added.
- The following cameras can be used at this time to upgrade the UT-1 firmware: D7100
Only the camera(s) indicated above can be used to upgrade UT-1 firmware. Firmware updates can also be perfomed for you at Nikon service centers.
Confirming the firmware version (using the D7100)
- Connect the UT-1 to a camera via USB cable, and turn the camera and UT-1 on.
- Press the camera's MENU button and select Network > Options > Firmware version from the setup menu. The WT-4's firmware version will be displayed.
- Turn off the UT-1 and the camera.
Download the Nikon UT-1 Communication Unit 1.1 firmware update: Windows | Macintosh
Firmware installation instructions (English, PDF): Windows | Macintosh
B&H carries the Nikon UT-1 Communication Unit.
From Nikon:
Modifications enabled with this firmware upgrade
- Camera settings can now be viewed and changed using the WR-1 when the WR-1 is used as a transmitter and the WR-R10 is connected to a D7100 for use as a receiver.
- Support for the Release Hold Time function built into the WR-1 is now supported when the WR-1 is used as a transmitter and the WR-R10 is used as a receiver.
- To make remote operation using the WR-1 function that allows for division of multiple units into groups (A, B, C, D) more convenient, the group specified with the WR-R10 is now fixed at group A rather than all groups (A, B, C, D) with transmission. With reception, the group is fixed at group A with firmware versions 1.00 and 2.00.
- The following cameras can be used at this time to upgrade the WR-R10 firmware: D7100
Only the camera(s) indicated above can be used to upgrade WR-R10 firmware. Firmware updates can also be perfomed for you at Nikon service centers.
Confirming the firmware version
- Connect the WR-R10 to a camera
- Turn on the camera
- Press the camera's MENU button and select Firmware version from the setup menu.
- The WR-R10's firmware version will be displayed with a "W".
- Turn off the camera.
Download the Nikon WR-R10 2.00 firmware update: Windows | Macintosh
Firmware installation instructions (English, PDF): Windows | Macintosh
B&H carries the Nikon WR-R10 Wireless Remote Controller Transceiver.
Nikon has released firmware version A:1.21/B:1.21 for Nikon 1 V1 digital cameras.
Modifications enabled with this firmware upgrade
- Immediately after the camera was turned on after attaching a lens, shooting display in the camera monitor or electronic viewfinder (view through the lens) sometimes appeared to move. This issue has been resolved.
Update instructions: Windows | Macintosh
Download the Nikon 1 V1 Firmware A:1.21/B:1.21: Windows | Macintosh
B&H carries the Nikon 1 V1 digital camera.
From Nikon:
Modifications enabled with this upgrade of firmware, release date January 29, 2013
- Subject tracking performance in AF-C (continuous-servo autofocus) autofocus mode with framing using the viewfinder has been improved.
Basic Upgrade instructions*
IMPORTANT - The firmware cannot be upgraded when Network> Network connection in the setup menu is set to ON. Be sure to set Network connection to OFF before attempting to upgrade the firmware.
- Create a new folder with an appropriate name on your computer.
- Choose the correct download below for the computer system you are using, and save the download to the folder created in step 1.
- Run the downloaded file to create the folder titled D4Update, containing the following file: D4_0104.bin
- Format an approved memory card in the camera, then remove .
- Copy the D4_0104.bin file to the top level of the memory card using a memory card reader or similar device, do not copy the file into any folder on the memory card.
- Insert memory card into the cameras memory card slot, and switch on.
- Select Firmware Version from the setup menu and follow the instructions displayed to upgrade the camera's firmware.
- DO NOT switch off the camera at any time during the update, doing so may result in the need for service.
- After the upgrade is complete, trun the camera off and remove the memory card.
- Check the cameras firmware version to be sure it completed.
- Format memory card in camera for use.
* - Firmware updates can be performed for you at authorized Nikon service centers.
Download the complete firmware update instructions here.
Download the Nikon D4 A:1.04 / B:1.02 firmware: Windows | Macintosh
From Nikon:
This software is for upgrading the COOLPIX S800c firmware from v1.0 or v1.1 to v1.2. Verify your camera’s firmware version using the instructions below. If this latest version is already installed in your camera, you need not update the firmware.
Be sure that you have read and understand the terms of the license agreement before initiating download of this software from the links at the bottom of this page.
Modifications enabled in this version
- The position information the GPS function attached to images was sometimes incorrect. This issue has been resolved.
- If images were captured before the playback mode icon is displayed, the date and time recorded was incorrect. This issue has been resolved.
How to verify your cameras current firmware version
If the latest firmware version is already installed on your S800c you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.
- Turn on the camera.
- Press the MENU button is shooting or playback mode, and tap Setup.
- Drag the screen down until Firmware version is displayed, and then tap Firmware Version.
- The camera's firmware version will be displayed.
- Turn off the camera.
Quick Install Guide
This is the quick install guide.
Power the camera from AC adapter unit or use a fully charged battery.
- Create a new folder with an appropriate name on your computer's hard drive.
- Download the Windows (.EXE) or Macintosh (.DMG) file from the links at the bottom of this page to the folder created in step 1.
- Run the downloaded file to create a folder called S800CUpdate which contains the firmware folder.
- Use a card reader or similar device to copy the firmware folder to the root directory of a formatted SD memory card.
- Insert the memory card into the camera's memory card slot and turn on the camera.
- Tap Firmware version in the camera's setup menu and follow instructions displayed to upgrade the firmware.
- After the upgrade is complete, turn the camera off and remove the memory card.
- Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.
From Nikon:
Modifications enabled with this upgrade of firmware, release date November, 27, 2012 (A:1.03 / B:1.02)
- Focus accuracy when a lens and teleconverter with a combined maximum aperture of f/8 is used has been increased
The Nikon COOLPIX S800c Firmware Update 1.1 is available for download: Widnows | Macintosh
From Nikon Europe:
This software is for upgrading the COOLPIX S800c firmware from v1.0 to v1.1. Verify your camera’s firmware version using the instructions below. If this latest version is already installed in your camera, you need not update the firmware.
Be sure that you have read and understand the terms of the license agreement before initiating download of this software from the links at the bottom of this page.
Modifications enabled in this version
- Support for Hindi and Arabic has been added.
- When a memory card inserted in the camera was ejected while an Android app saved to the camera’s internal SD card storage (internal SD card space) was running, operation of the Android OS sometimes became unstable. This issue has been resolved.
- When the camera was turned on and then off, icons for Android apps saved to the camera’s internal SD card storage (internal SD card space) sometimes disappeared. This issue has been resolved.
- An issue that sometimes caused unexpected termination of Wi-Fi connections has been resolved.
- An issue that sometimes caused the camera to stop functioning when multiple Android apps were running has been resolved.
- DPOF-compatible printers were sometimes unable to recognize information specified with print orders (playback menu>Print order). This issue has been resolved.
Detailed firmware upgrade instructions here.
Nikon has released a pair of Nikon 1 Lens firmware updates:
1 NIKKOR VR 10-30mm f/3.5-5.6L Firmware Update 1.10: USA | Europe
1 NIKKOR VR 30-110mm f/3.8-5.6 L Firmware Update 1.10: USA | Europe
Modifications enabled with L firmware Ver. 1.10
When this lens is used with Nikon 1 cameras released in, or after, August 2012, the camera can be turned off by locking the lens barrel (retractable lens barrel button), even if the monitor has turned off and the camera has entered standby mode.
I'm traveling right now, so I apologize in advance for the consolidated Nikon news update post:
Announced today are the Nikon 1 J2 camera, NIKKOR 11-27.5mm f/3.5-5.6 Lens and Waterproof Case WP-N1.
The Nikon COOLPIX L610 Digital Compact Camera has been announced.
Adorama has the new Nikon gear available for preorder.
Nikon 1 V1 firmware A:1.20 / B:1.20 is available for download.
Nikon 1 J1 firmware to A:1.20 / B:1.20 is available for download
Nikon ViewNX 2.5.0 in now available fordownload.
Nikon D4 Firmware Version A:1.02 / B:1.02 is now available foor download: USA | Europe
Modifications enabled with this upgrade of firmware, release date July 4, 2012:
- An issue that caused the camera to freeze when attempting to format a memory card (setup menu>Format memory card) while the camera was connected to a network in HTTP server mode has been resolved.
- Format memory card can now be added to My Menu.
- Gamut for Adobe RGB images displayed in the camera's monitor has been changed. This enables more vivid display of images.
- The stability of network connections when the FTP upload option is selected has been increased.
- When recording movies using a lens with an aperture ring in [P] or [S] exposure mode, and Aperture ring selected for Custom Setting f10: Customize command dials>Aperture setting, the minimum aperture was applied. This issue has been resolved.
- When a still image captured during movie recording with 1920 ×1080; 30 fps; crop, 1920 × 1080; 25 fps; crop, or 1920 × 1080; 24 fps; crop selected for Movie settings>Frame size/frame rate and Live frame grab selected for Custom Setting g4: Assign shutter button was displayed in Capture NX 2 or ViewNX 2, the position of the focus point displayed differed from actual recording position. This issue has been resolved.
 "Share on Pinterest!"){kind=small}
 |
|