Nikon Firmware Updates (Page 5)

From Nikon:

Modifications enabled with firmware COOLPIX S9700 Ver. 1.1

• In some rare cases, the camera would freeze when it was turned on after USB charging completed. This issue has been resolved.
• In some rare cases, the lens would automatically zoom in and the camera would freeze when it was turned on. This issue has been resolved.

Download the Nikon COOLPIX S9700 Firmware v1.1

From Nikon:

The following cameras can be used to update UT-1 firmware.

• D810, D750, D7200, and D7100
• D800 and D800E running A and B firmware Ver. 1.10 or later

* Only the camera(s) indicated above can be used to update UT-1 firmware.
* Firmware updates can be performed for you at authorized Nikon service centers.

Modifications enabled with firmware Ver. 2.3

• Support for the D7200 has been added.

Download: Communication Unit UT-1 Firmware Ver. 2.3

B&H carries the Nikon Communication Unit UT-1.

From Nikon:

This service provides software for upgrading Nikon 1 AW1 firmware to A:1.10 / B:1.10:

• This software allows for simultaneous upgrade of both A and B firmware to the latest version. If this latest firmware version is already installed on your camera, you need not proceed with download or installation of this Firmware upgrade.
• This software is provided to those who agree to the terms of the software license at the bottom of this page. When the user selects the I agree - Begin download option outside of the frame, agreement to the terms of the software license is inferred and the user is bound by the terms of the Nikon Corporation (hereafter “Nikon”) License Agreement.
• NOTE: The camera's internal clock may be reset when the firmware is upgraded. Should this occur, set the clock to the correct date and time after the firmware has been upgraded using the Time Zone and date itme in the setup menu.
• Be sure that you have read and understand the terms of the license agreement before initiating download of this software.

Updates included with this release

• Support for the FULL/LIMIT focus limit switch on the 1 NIKKOR VR 70-300mm f/4.5-5.6 has been added.
• When camera firmware is updated to this version, autofocus does not function when an FT1 running L firmware Ver. 1.10 or earlier is used. Users of the FT1 must update FT1 L firmware to Ver. 1.20 at the same time camera firmware is updated.
• An issue that prevented reading of .MOV data contained in folders numbered 256 or higher on the memory card inserted in the camera by an application such as the Wireless Mobile Utility used to connect a device via PTP/IP has been resolved.
• An Underwater flash option has been added to the shooting menu to support use of the Underwater Speedlight SB-N10.
• An issue that caused images captured using a non-CPU lens with the Mount Adapter FT1 to be underexposed has been resolved.

Download: Nikon 1 AW1 Firmware A:1.10 / B:1.10

From Nikon:

Nikon D810 firmware C:1.02

Modifications enabled with this upgrade of firmware, release date December 17, 2014

• When playback zoom was applied to an image displayed in the camera monitor (image display enlarged) while the memory card access lamp was still lit immediately after capture, the image was not correctly displayed. This issue has been resolved.
• When menus were displayed with the camera connected to a 4K-compatible TV via HDMI, display in both the camera monitor and on the TV was not correct. This issue has been resolved.
• Noise that could sometimes be heard when Custom Setting d1: Beep was set to any option other than Off has been reduced.

Download: D810 firmware C:1.02

Modifications enabled with this upgrade of firmware, release date December 17, 2014

• When shooting with an optional Speedlight and Auto FP high-speed sync enabled with On selected for ISO sensitivity settings > Auto ISO sensitivity control in the photo shooting menu, images were sometimes over-exposed. This issue has been resolved. (Enabling auto FP high-speed sync: Select 1/200 s (Auto FP) or 1/250 s (Auto FP) for Custom Setting e1: Flash sync speed)
• When menus were displayed with the camera connected to a 4K-compatible TV via HDMI, display in both the camera monitor and on the TV was not correct. This issue has been resolved.
• Noise that could sometimes be heard when Custom Setting d1: Beep was set to any option other than Off has been reduced.

Download: Nikon D750 firmware C:1.01

B&H carries the Nikon D810 and D750 DSLR cameras.

Upon reading the modifications listed in the COOLPIX S6900 Firmware v1.1 release, I actually laughed heartily for several seconds (laughing harder with every modificaiton I read). This is definitely the strangest set of bugs I have ever seen in a camera. [Sean]

From Nikon:This service provides software for upgrading COOLPIX S6900 firmware to 1.1

• This software is provided to those who agree to the terms of the software license at the bottom of this page. When the user selects the I agree - Begin download option outside of the frame, agreement to the terms of the software license is inferred and the user is bound by the terms of the Nikon Corporation (hereafter “Nikon”) License Agreement.
• Be sure that you have read and understand the terms of the license agreement before initiating download of this software.

Modifications enabled with this firmware upgrade

The following issues with display languages selected for Language in the setup menu have been resolved.

• The German language could not be selected if Date and time under Setup Menu>Time zone and date had not been set.
• The Hungarian language could not be selected when a locked SD memory card was inserted in the camera.
• The Portuguese (PT) language could not be selected while the battery was charging while inserted in the camera, or with an active Wi-Fi connection.
• The Russian, Hungarian, and Romanian languages could not be selected with an active Wi-Fi connection.
• Depending upon the display position on the Language settings screen, the Persian language sometimes could not be selected.

Download the COOLPIX S6900 Firmware v1.1 Update.

From Nikon:

COOLPIX P340 Firmware: 1.2 update

Updates enabled with this release:

• An issue that prevented charging of the Rechargeable Li-ion Battery EN-EL12 using the camera and charging AC adapter when the EN-EL12 was completely discharged has been resolved.
• When RAW (NRW) images captured with a burst of continuous shooting at a setting of Continuous H were opened in image-processing software such as ViewNX 2 for development, image colors were abnormal. This issue has been resolved.

Download the COOLPIX P340 Firmware: 1.2.

Updates enabled with this release

• An issue that prevented charging of the Rechargeable Li-ion Battery EN-EL23 using the camera and charging AC adapter when the EN-EL23 was completely discharged has been resolved.

Download the COOLPIX P600 Firmware: 1.2.

From Nikon:

Updates provided with this release, C:1.12

• An issue that sometimes prevented appropriate exposure control with interval timer photography has been resolved.

Download the Nikon COOLPIX A Firmware C:1.12

B&H carries the Nikon COOLPIX A digital camera.

From Nikon:

Nikon Communication Unit UT-1 Firmware 2.2

Updates included with this version, 2.2:

• Support for the D750 has been added.

Important Notes

• You will need to connect the UT-1 to a supported Nikon camera to update UT-1 firmware. Currently, the Nikon D810, D800 or D800E (firmware 1.10 or later), D750 and D7100 can be used to update this firmware.
• When using the UT-1 running firmware Ver. 2.2, be sure that Wireless Transmitter Utility1.5.2 or later is installed. To use the UT-1 running firmware 2.2 with the D800 or D800E, the camera must be running firmware 1.10 or later. If software/firmware version(s) are older version(s), be sure to download the latest version(s) from the links above and perform the necessary updates.
• Network profiles created with earlier versions of software or firmware cannot be used. You will need to create new profiles using the Wireless Transmitter Utility 1.5.2 or later.

Download the Nikon Communication Unit UT-1 Firmware 2.2.

B&H carries the Nikon Communication Unit UT-1.

The following Nikon firmware updats are now available:

• Nikon D610 - C: 1.01
• Nikon D600 - C: 1.02
• Nikon D7100 - C: 1.02
• Nikon D7000 - A:1.04 / B:1.05
• Nikon D90 - A:1.00/ B:1.01

All of the firmware updates contain the following modification:

• Support for distortion control data Ver. L: 2.000 and later has been added.

Note: Camera firmware must be updated before distortion control data can be updated to Ver. L: 2.000 or later.

You can download the firmware updates using the links above.

B&H carries the Nikon D610 and D7100 DSLR cameras.

From Nikon:

IMPORTANT

• If you have a Lexar 400x or 1000x CompactFlash memory card, please click this link for information regarding compatibility with your camera.
• The firmware cannot be upgraded when Network > Network connection in the Setup menu is set to ON. Be sure to set Network connection to OFF before attempting to upgrade the firmware.
• Please be sure to use a FULLY charged EN-EL18 battery or EH-6 AC Adapter with EP-6 Power connector to perform this update

Updates included with this release C:1.10 - dated August 26, 2014

• When SPORT VR mode, built into the AF-S NIKKOR 400mm f/2.8E FL ED VR, is selected, the same continuous shooting rate available when OFF is selected is now possible.
• When memory cards with capacities greater than 128 GB were formatted with the camera, they were formatted using the FAT32 file system. They are now formatted using the exFAT file system.
• Operation has been changed so that when menus are displayed during movie live view and the movie-record button is pressed, the menu display disappears and display returns to movie live view. To begin movie recording, press the movie-record button again.
• The Zoom on/off option for playback mode with Custom Setting f1: Multi Selector Center Button can now be used to zoom-in on images with zoom display centered on the active focus point, even if they were captured with live view photography. However, the focus point will not be displayed.
• The Help explanation provided for the Preset focus point option under Custom Setting f19: Lens Focus Function Buttons has been revised.
• The following issues have been resolved.

• When NEF (RAW) recording > Image size in the shooting menu was set to RAW S (Small), the number of shots possible with uninterrupted shooting (buffer capacity, C-REM) displayed by the camera differed depending upon the NEF (RAW) recording > NEF (RAW) bit depth setting selected.\
• When Camera Control Pro 2 was used to take pictures with Record set to PC+CARD, and Secondary slot function in the camera's shooting menu set to Overflow, the shutter could not be released when the memory card in the primary slot became full.
• When Image review in the playback menu was set to On, images were sometimes not displayed in the monitor when the shutter was released while exposure meters were off.
• When images were output to an HDMI device, resolution seemed insufficient with display in full-frame playback mode (did not apply to playback zoom display).
• When images, captured with Image review in the playback menu set to On, and Auto distortion control in the shooting menu set to On, were automatically displayed in the monitor immediately after capture, auto distortion control was sometimes not applied.
• When the multiple exposure function was used to capture images with Image review in the playback menu set to On, and Auto distortion control in the shooting menu set to On, auto distortion control was not applied to the recorded images.
• When an image to which an image comment had been added was copied to White balance > Preset manual, only the first 24 characters of the image comment were copied.
• If log-in to the FTP server failed when network settings were applied with Wired LAN selected for Network > Choose hardware in the camera's setup menu, and FTP upload selected as the connection type and IP address acquisition set to Obtain automatically with the Connection Wizard, the IP address displayed when the camera tried again to obtain it automatically was "000.000.000.000".
• When a movie recorded at a frame rate of 30p, 25p, or 24p was played back on a TV to which the camera was connected via HDMI with HDMI > Output resolution in the the camera's setup menu set to 1080p (progressive), display on the TV was distorted.
• When a file containing an IPTC preset (IPTC information) that included double-byte characters in its profile was copied to the camera, the camera froze when attempting to view the contents of the IPTC preset.
• When Add items was selected for My Menu, OK was displayed even for items that cannot be added.
• When Language in the setup menu was set to Arabic, text and icons in some menu displays overlapped, and text was positioned too far to the right.

Download:
Nikon D4S Firmware C:1.10 - Windows | Macintosh

Update Instructions (English) - Windows | Macintosh

B&H carries the Nikon D4s DSLR Camera.

From Nikon:

This service provides software for upgrading COOLPIX A firmware to C: 1.11

Updates provided with this release, C:1.11

• Focus range with normal autofocus has been changed from approximately 50 cm (1 ft 8 in.)–8 to approximately 30 cm (1 ft)–8 from the center of the front surface of the lens.
• AF focus-acquisition rate has been improved when the scene contained in the frame exhibits an extremely high level of contrast.
• The color of the focus area in manual focus mode has been changed to white, making it easier to identify the current focus mode.
• Less battery power is now consumed with interval timer photography, enabling interval timer shooting for a longer period of time when the camera is powered by the battery.

Download the COOLPIX A Firmware C:1.11.

B&H carries the Nikon COOLPIX A.

From Nikon:

Updates included with this release (Applicable to AW1, J1, J2, J3, V1, V2 & S1)

• Support for the FULL/LIMIT focus limit switch on the 1 NIKKOR VR 70-300mm f/4.5-5.6 has been added.
  
• When camera firmware is updated to this version, autofocus does not function when an FT1 running L firmware Ver. 1.10 or earlier is used. Users of the FT1 must update FT1 L firmware to Ver. 1.20 at the same time camera firmware is updated.

Additional updates Applicable to AW1

• An issue that prevented reading of .MOV data contained in folders numbered 256 or higher on the memory card inserted in the camera by an application such as the Wireless Mobile Utility used to connect a device via PTP/IP has been resolved.
• An Underwater flash option has been added to the shooting menu to support use of the Underwater Speedlight SB-N10.
• An issue that caused images captured using a non-CPU lens with the Mount Adapter FT1 to be underexposed has been resolved.

Additional updates Applicable to J1, J2 & V1

• An issue that prevented printing of photos using the PictBridge standard with some printers has been resolved.

Additional updates Applicable to J3

• An issue that sometimes caused a card access error to be displayed when a Lexar UHS-I SD memory card was inserted in the camera has been resolved.
• An issue that prevented wireless shooting via the WU-1b (Wireless Mobile Adapter) when the Digiscoping Adapter DSA-N1 for Nikon 1 cameras was used, or when manual focus was used with an AF-S lens mounted via the Mount Adapter FT1, has been resolved.
• An issue that prevented reading of .MOV data contained in folders numbered 256 or higher on the memory card inserted in the camera by an application such as the Wireless Mobile Utility used to connect a device via PTP/IP has been resolved.
• An issue that prevented adjustment of magnification for manual focus display from Focus mode > Manual focus in the shooting menu when a manual focus lens was used has been resolved.

Additional updates Applicable to V2

• An issue that caused images captured using the Mount Adapter FT1 with continuous shooting at 15 fps to be underexposed has been resolved.
• An issue that sometimes caused a card access error to be displayed when a Lexar UHS-I SD memory card was inserted in the camera has been resolved.
• An issue that prevented wireless shooting via the WU-1b (Wireless Mobile Adapter) when the Digiscoping Adapter DSA-N1 for Nikon 1 cameras was used, or when manual focus was used with an AF-S lens mounted via the Mount Adapter FT1, has been resolved.
• An issue that prevented reflection of the exposure compensation setting when the Mount Adapter FT1 was used with shooting in Motion Snapshot shooting mode and Scene auto selector exposure mode has been resolved.
• An issue that prevented reading of .MOV data contained in folders numbered 256 or higher on the memory card inserted in the camera by an application such as the Wireless Mobile Utility used to connect a device via PTP/IP has been resolved.

Additional updates Applicable to S1

• An issue that sometimes caused a card access error to be displayed when a Lexar UHS-I SD memory card was inserted in the camera has been resolved.
• An issue that prevented wireless shooting via the WU-1b (Wireless Mobile Adapter) when the Digiscoping Adapter DSA-N1 for Nikon 1 cameras was used, or when manual focus was used with an AF-S lens mounted via the Mount Adapter FT1, has been resolved.
• An issue that prevented reading of .MOV data contained in folders numbered 256 or higher on the memory card inserted in the camera by an application such as the Wireless Mobile Utility used to connect a device via PTP/IP has been resolved.
• An issue that prevented adjustment of magnification for manual focus display from Focus mode > Manual focus in the shooting menu when a manual focus lens was used has been resolved.

Download:
Nikon 1 AW1 Firmware A:1.10 / B:1.10 - Windows | Macintosh
Nikon 1 J1 Firmware A:1.40 / B:1.40 - Windows | Macintosh
Nikon 1 J2 Firmware A:1.20 / B:1.20 - Windows | Macintosh
Nikon 1 J3 Firmware A:1.20 / B:1.20 - Windows | Macintosh
Nikon 1 V1 Firmware A:1.40 / B:1.40 - Windows | Macintosh
Nikon 1 V2 Firmware A:1.20 / B:1.20 - Windows | Macintosh
Nikon 1 S1 Firmware A:1.20 / B:1.20 - Windows | Macintosh

From Nikon:

Modifications enabled with this upgrade of firmware, release date May 13, 2014

• Custom Setting f13 has been changed to Assign Movie Record Button.
• With Custom Setting f13 changed to Assign Movie Record Button, Assign MB-D12 AF-ON is now Custom Setting f14.
• Custom Setting f15: Assign Remote Fn Button has been added.
• The following functions have been added or renamed when the D800 is used with the Communication Unit UT-1 running firmware Ver. 2.0. A Network (UT-1) option has been added to, and Wireless transmitter has been renamed Wireless transmitter (WT-4) in, the setup menu.

Function that has been added:

• HTTP server mode - Use to view the pictures on the camera memory card, or to take photographs, from the web browser on a computer or iPhone.

Functions that have been renamed:

• FTP upload mode (previously Transfer mode (FTP)) - Use to upload photos and movies from camera memory cards, or to upload photos as they are taken, to an ftp server.
• Image transfer mode (previously Transfer mode (PC)) - Use to upload photos and movies from camera memory cards, or to upload photos as they are taken, to a computer.
• Camera control mode (previously PC mode) - Use to control the camera from a computer running Camera Control Pro 2 (available separately) and save photos and movies directly to the computer.
• Support for the updated version of Communication Unit UT-1 firmware has been added.

IMPORTANT NOTE: To enable support for these functions, Communication Unit UT-1 firmware must be updated to Ver. 2.0 or later, and the Wireless Transmitter Utility must be updated to Ver. 1.5.0 or later. When camera firmware is updated, network profiles specified with earlier firmware versions cannot be used. Network profiles must be created again.

• Support for CompactFlash memory cards with capacities greater than 128 GB has been added.
• When AF-ON only was selected for Custom Setting a4 (AF activation) and the AF-ON button was pressed to initiate autofocus during viewfinder photography, focus remained locked even after the user took their finger off the button, and the shutter could be released at any time. However, specifications have been modified so that the shutter cannot be released under the following conditions if the camera fails to focus.

• Autofocus mode is set to AF-S (single-servo AF)
• AF-area mode is set to Single-point AF
• Custom Setting a2 (AF-S priority selection) is set to Focus

• When values for 12 or 18 lenses were stored with AF fine-tune > Saved value in the setup menu, only some of the lenses for which values had been stored were displayed under List saved values. This issue has been resolved.
• When the live view selector was set to live view photography with Custom Setting g4 (Assign shutter button) set to Record movies, a value for preset manual white balance could not be measured. This issue has been resolved.
• When the built-in flash was set to Commander mode, remote Speedlights sometimes did not fire. This issue has been resolved.
• In some rare cases, the memory card access lamp remained lit for longer than usual, and some time was required before any operations could be performed. This issue has been resolved.

Click here for the D800/D800E manual addendum reflecting changes made with this firmware update.

Download:
Nikon D800 Firmware A: 1.10 / B:1.10 - Windows | Macintosh
Nikon D800E Firmware A: 1.10 / B:1.10 - Windows | Macintosh

Communication Unit UT-1

Updates included with this version

The following functions have been added or renamed when the UT-1 is used with the D800 / D800E (firmware 1.10).

Function that has been added:

• HTTP server mode - Use to view the pictures on the camera memory card, or to take photographs, from the web browser on a computer or iPhone.

Functions that have been renamed:

• FTP upload mode (previously Transfer mode (FTP)) - Use to upload photos and movies from camera memory cards, or to upload photos as they are taken, to an ftp server.
• Image transfer mode (previously Transfer mode (PC)) - Use to upload photos and movies from camera memory cards, or to upload photos as they are taken, to a computer.
• Camera control mode (previously PC mode) - Use to control the camera from a computer running Camera Control Pro 2 ( available for purchase separately) and save photos and movies directly to the computer.

Download:
Communication Unit UT-1 Firmware 1.10 - Windows | Macintosh

B&H carries the Nikon D800, Nikon D800E and Communication Unit UT-1.

From Nikon:

Updates included with this release, 1.1

• An issue that resulted in deviation in the timing of movie video and sound has been resolved.
• An issue that caused latitude and longitude information displayed with Data imprint to be incorrect has been resolved.
• An issue that, in some rare cases, caused the camera to freeze while shooting with acquisition of GPS position information has been resolved.

Download the Nikon COOLPIX AW110 Firmware 1.1.

The COOLPIX AW110 has been replaced by the Nikon COOLPIX AW120 Waterproof Camera.

From Nikon:

IMPORTANT

• If you have a Lexar 400x or 1000x CompactFlash memory card, please click this link for information regarding compatibility with your camera.
• The firmware cannot be upgraded when Network > Network connection in the Setup menu is set to ON. Be sure to set Network connection to OFF before attempting to upgrade the firmware.
• Please be sure to use a FULLY charged EN-EL18 battery or EH-6 AC Adapter with EP-6 Power connector to perform this update

Updates included with this release C:1.01 - dated April 22, 2014

• When Custom Setting f1 (Multi selector center button) > Playback mode was set to View histograms, the histogram was not displayed correctly for the image played back in the monitor, even when the center button on the multi selector was pressed, when the following conditions were met. This issue has been resolved.

• Image quality was set to NEF (RAW) + JPEG fine, NEF (RAW) + JPEG normal, or NEF (RAW) + JPEG basic.
• An option other than "Overview data" or "RGB histogram" was selected for photo information displayed with full-frame image playback.

• With full-frame image playback with "Highlights" or "RGB histogram" display selected, image chroma (saturation) changed with flashing of highlights. This issue has been resolved.
• When images captured with Color space set to Adobe RGB were enlarged with playback in the monitor, image chroma (saturation) changed. This issue has been resolved.
• When Rotate tall in the playback menu was set to On, and an image captured in "tall" (portrait) orientation was enlarged slightly (playback zoom-in button pressed once or twice) with monitor playback, the image did not appear to be very sharp or clear. This issue has been resolved.
• With capture of a Compressed RAW image, followed by a Lossless compressed RAW image, with Image quality set to NEF (RAW), the camera was sometimes unable to correctly record the second RAW image. This issue has been resolved.

Download the Nikon D4S Firmware C:1.01

B&H carries the Nikon D4s DSLR Camera.

From Nikon:

Modifications enabled with this firmware upgrade

• Support for autofocusing when mounted on the Nikon 1 V3 has been added.

Download
Mount Adapter FT1 L Firmware 1.20 - Windows | Macintosh

Installation Instructions: Windows | Macintosh

B&H carries the Nikon Mount Adapter FT1 L.

From Nikon:

IMPORTANT

• If you have a Lexar 400x or 1000x CompactFlash memory card, please click this link for information regarding compatibility with your camera.
• The firmware cannot be upgraded when Network > Network connection in the Setup menu is set to ON. Be sure to set Network connection to OFF before attempting to upgrade the firmware.
• Please be sure to use a FULLY charged EN-EL18 battery or EH-6 AC Adapter with EP-6 Power connector to perform this update.
• Do not load settings data saved with A:1.05/ B1.03 or earlier using the Save/ Load settings option in the setup menu after updating D4 firmware to A:1.10 / B:1.10. Settings data saved with D4 A:1.05/ B:1.03 or earlier is not compatible with D4 A and B firmware Ver. 1.10.
• When transferring images recorded to a memory card with a capacity greater than 128 GB to a computer using a card reader or similar device, be sure that the computer's operating system and the card reader support capacities greater than 128 GB. If they do not support capacities greater than 128 GB, it may not be possible to transfer images in this way. As support for memory cards with capacities greater than 128 GB is provided with D4 A:1.10 / B:1.10 firmware, images may be transferred by connecting the camera to a computer via USB cable.

Updates included with this release A:1.10 / B: 1.10 - dated March 18, 2014

• Custom Setting f17: Assign Remote Fn Button has been added * .
• Support for CompactFlash memory cards with capacities greater than 128 GB has been added.
• When an XQD memory card and one of certain CompactFlash memory cards were inserted in the camera at the same time, "Err" was displayed in the top control panel. This issue has been resolved.
• When AF-ON only was selected for Custom Setting a4 (AF activation) and the AF-ON button was pressed to initiate autofocus during viewfinder photography, focus remained locked even after the user took their finger off the button, and the shutter could be released at any time. However, specifications have been modified so that the shutter cannot be released under the following conditions if the camera fails to focus.

• Autofocus mode is set to AF-S (single-servo AF)
• AF-area mode is set to Single-point AF
• Custom Setting a2 (AF-S priority selection) is set to Focus

* - We have prepared a supplementary user's manual that covers this function. Click here to download the supplementary user's manual [T-D-P.com Note: Preceding link from Nikon was broken this morning]. Adobe's Acrobat Reader must be installed on your computer to view this file.

Download:
Nikon D4 Firmware A:1.10 / B:1.10 - Windows | Macintosh

B&H has the Nikon D4's successor, the D4s, available for preorder.

From Nikon:

This service provides software for upgrading Nikon 1 AW1 firmware to A:1.01 / B:1.00.

Updates included with this release

• An issue that prevented updating of the camera’s A-GPS file using the latest A-GPS file has been resolved.

Download: Windows | Macintosh

B&H carries the Nikon 1 AW1 Mirrorless Waterproof ILC.

From Nikon:

Nikon Df

Updates included with this release - C:1.01

• When Press for Custom Setting f4 (Assign Fn button) , f5 (Assign preview button) , or f6 (Assign AE-L/AF-L button) was set to Preview, and the camera's Fn button, Pv button, or AE-L/AF-L button was pressed, while viewfinder shooting using a Speedlight SB-800, a preview was not displayed in the camera monitor and a modeling flash was not fired. This issue has been resolved.
• When a Speedlight that does not support Auto FP high-speed sync was used with Custom Setting e1 (Flash sync speed) set to 1/250 s (Auto FP), the maximum shutter speed was 1/200 s. This issue has been resolved.
• When images captured with Auto ISO sensitivity control in the shooting menu set to Off were displayed in ViewNX 2 or Capture NX 2, Auto (ISO XXX) was incorrectly displayed for ISO Sensitivity in Metadata. This issue has been resolved.

Download
Nikon Df Firmware version C:1.01: Windows | Macintosh

Nikon D5200

Updates included with firmware C: 1.02

• The camera now supports display of error messages when lenses with a retractable lens mechanism ( e.g., AF-S DX NIKKOR 18–55mm f/3.5–5.6G VR II ) are used. An error message is displayed and the shutter cannot be released when the lens barrel is retracted.
• Display of focal lengths in 35mm [135] format recorded in image Exif data has been corrected.
• The following issues have been resolved.

• The camera would sometimes freeze when adding options to My Menu ( Add items ).
• Under certain conditions, the camera would sometimes not focus automatically when the AE-L / AF-L button was pressed with AF-ON operation assigned to the button.
• When shooting with High Dynamic Range (HDR) enabled, noise in the form of a line would sometimes appear at bottom right in images.

Download
Nikon D5200 Firmware version C: 1.02: Windows| Macintosh

Nikon D3200

Updates included with this release - C:1.03

• The camera now supports display of error messages when lenses with a retractable lens mechanism (e.g., AF-S DX NIKKOR 18–55mm f/3.5–5.6G VR II) are used. An error message is displayed and the shutter cannot be released when the lens barrel is retracted.

Download
Nikon D3200 Firmware version C:1.03: Windows | Macintosh

B&H carries the Nikon Df, D5200 and D3200 DSLR cameras.

Nikon has updated the firmware for several cameras to address a EN-EL14a battery issue.

From Nikon:

Modifications enabled with this firmware upgrade

• Remaining battery charge is now accurately detected for Rechargeable Li-ion Battery EN-EL14a. By upgrading firmware to [current version], EN-EL14a performance is maximized so that more images can be captured (battery performance) than when an EN-EL14 is used. With firmware [previous firmware version] and earlier, the number of images that can be captured (battery performance) when an EN-EL14a is used is less than when an EN-EL14 is used.

Download:

• Nikon P7700 Firmware Version 1.3 - Windows | Macintosh
• Nikon D5100 Firmware Version A:1.02 / B:1.01 - Windows | Macintosh
• Nikon D5200 Firmware Version C: 1.01* - Windows | Macintosh
• Nikon D3100 Firmware Version A:1.02, B:1.01 - Windows | Macintosh
• Nikon D3200 Firmware Version C: 1.02 - Windows | Macintosh

Adorama carries the Nikon P7700, D5100, D5200, D3100 and D3200 digital cameras.