Nikon Firmware Updates (Page 4)

From Nikon:

Nikon D500 Firmware v.1.10

Changes from “C” Firmware Version 1.02 to 1.10:

• Added support for the iOS version of SnapBridge.
• Changed some help text.
• Fixed the following issues:
• Images would not display correctly if playback zoom was used during image review.
• The focus point display would not light if the shutter-release button was pressed halfway after the standby timer had expired.
• The camera would stop responding if a command dial was used in the CUSTOM SETTING MENU > f Controls > f1 Custom control assignment > Movie record button + menu.
• If an option other than Off was selected for Active D-Lighting in the PHOTO SHOOTING MENU, pictures taken with an optional flash unit in auto aperture (AA), non-TTL auto (A), or distance-priority manual (GN) flash mode would be underexposed.

Download Nikon D500 Firmware v.1.10

Changes from “C” Firmware Version 1.00 to 1.10:

• Added support for the iOS version of SnapBridge.

Download: Nikon D3400 Firmware v.1.10

B&H carries the Nikon D500 and has the D3400 DSLR available for preorder.

From Nikon:

Changes from Firmware Version 1.0 to 1.1

• Fixed an issue that resulted in the camera interfering with nearby radios and other devices, possibly producing audible noise, when connected to the EH-73P/EH-73PCH charging AC adapter via USB with the battery inserted and the power off. This issue does not occur when the EH-71P/EH-71PCH charging AC adapter is used.

Download: Nikon COOLPIX S33 Firmware v.1.1

B&H carries the Nikon COOLPIX S33 Digital Camera.

From Nikon:

Changes from Firmware Versions “A” 1.02/“B” 1.02 to Versions “A” 1.03/“B” 1.02

Fixed the following issues:

• The battery level indicator would on rare occasions flash if the camera was turned on with Clean at shutdown or Clean at startup & shutdown selected for SETUP MENU > Clean image sensor > Clean at startup/shutdown.
• Two different pictures with the same file number would on rare occasions be recorded to both memory cards if two cards were inserted with Overflow selected for SHOOTING MENU > Slot 2.

Download: Nikon D3s Firmware v. “A” 1.03/“B” 1.02

From Nikon:

Changes from “C” Firmware Version 1.01 to 1.02

• Addressed an issue that sometimes caused errors with certain UHS-II SD memory cards. As we were able to confirm that these were read errors arising not in the camera but in the cards themselves, we addressed the issue with a work-around that switches temporarily to UHS-I mode when a card-side error occurs in UHS-II mode. The camera switches back to UHS-II mode when turned off and then on again or when the standby timer restarts. Card-side read errors may still occur after the update, albeit very infrequently.

Download: Nikon D500 Firmware v.1.02

B&H carries the Nikon D500.

From Nikon:

Changes from Firmware Version 1.0 to 1.1

• Fixed an issue that in rare cases would prevent the camera turning on even when a battery with sufficient charge was inserted.
• Updated some help text.

Download: Nikon COOLPIX A300 Firmware v1.1

From Nikon:

Further advance of Nikon D5 digital SLR camera performance through expanded functions

Tokyo - Nikon Corporation has released new firmware, C: Ver. 1.10, that expands the functions of its flagship Nikon FX-format digital SLR camera, the D5.

The D5 has been extremely well received on all fronts, winning such globally prestigious photo and imaging awards as the TIPA Awards 2016, and the Camera GP (Grand Prix) 2016 Readers Award (sponsored by Japan's Camera Journal Press Club), which is selected through voting by users.

Nikon has released new firmware for the D5, C: Ver. 1.10, that enhances D5 performance even further. The new firmware offers a major upgrade to the camera's shooting capabilities, delivering four key improvements. First, the maximum recording time of movies, including for 4K UHD movies, is extended, and three functions — Flicker reduction for still images, 9-point dynamic-area AF AF-area mode, and Electronic VR for movies — are added. In addition to these four major changes, some additional updates* have been applied to the new firmware.

Details regarding "additional updates" are provided on the firmware's free download page (Nikon Download Center).

Release overview

The new firmware is available for download from June 23, 2016. It can be downloaded free of charge from the following URL.

New firmware for the D5, C: Ver.1.10

Four major improvements

1. Maximum movie recording time, including for 4K UHD movies, extended to 29 min. 59 s

Movies up to 29 minutes 59 seconds in length can now be recorded at all Movie quality and Frame size/frame rate settings. The new firmware increases the maximum recording time of even 4K UHD (3840x2160) movies from 3 minutes to 29 minutes 59 seconds. In addition, movies are recorded to up to eight separate files, each of which has a file size of up to 4 GB. Separate movie files can be combined to create a single movie using ViewNX-Movie Editor.

The maximum recording time for 4K UHD time-lapse movies is 3 minutes.

2. Flicker reduction for still images added for more stable exposure under lighting that flickers

When shooting under fluorescent and some other types of artificial lighting, flickering may cause uneven exposure in parts of images and/or variations in exposure and color reproduction characteristics between individual images captured continuously or in quick succession. We have equipped the new firmware with a Flicker reduction function for still images^*1 that reduces these effects. When Flicker reduction is enabled, the camera detects peak brightness as light flickers and automatically times shutter release with these peaks in brightness for stable exposure and color reproduction characteristics. This function is effective when continuous shooting is used for indoor sporting events or similar situations captured at fast shutter speeds^*2

*1 Still images captured during viewfinder photography (not available with mirror up mode).
*2 The continuous shooting rate may decrease.

3. 9-point dynamic-area AF AF-area mode added for focusing on a limited portion of a moving subject

With dynamic-area AF, the camera focuses based on information from surrounding focus points* if the subject briefly leaves the focus point selected by the photographer. The D5 originally supported 25-point, 72-point and 153-point dynamic-area AF. A 9-point dynamic-area AF option has been added with the new firmware. This new option is effective for focusing on a more specific portion of a moving subject.

* In dynamic-area AF with 9, 25 or 72 points, the number of focus points actually used may be fewer than 9, 25 or 72, depending on the selected primary focus point.

4. Electronic vibration reduction function, effective with hand-held recording, added (for HD and full-HD^*1 movie recording)

The new firmware has been equipped with an Electronic VR function that reduces the effects of camera shake with hand-held recording of movies in the FX- or DX-based movie formats (image areas)^*2. The effects of camera shake in three directions — vertical (up and down), horizontal (left and right), and rotational (around the center of the lens) — are reduced. This function is effective when recording movies in places or situations in which use of a tripod is prohibited or inconvenient, or when there simply isn't time to set one up. In addition, electronic VR can be used in combination with the optical vibration reduction (VR) built into a NIKKOR lens for more effective reduction of the effects of camera shake.

*1 Not available with 1920 x 1080 crop settings.
*2 The angle of view will be reduced slightly.

The effects of electronic VR are also reflected when photos are captured during movie recording (Live frame grab).
When Electronic VR is enabled, the maximum sensitivity allowed is ISO 102400, even if ISO sensitivity is set to Hi 0.3 or higher.

B&H carries the Nikon D5.

From Nikon:

Changes from “C” Firmware Version 1.00 to 1.10

• The camera can now record movies up to 29 minutes and 59 seconds long. Movies are recorded across up to 8 files, each up to 4 GB size, which can be joined together using the ViewNX-Movie Editor option in ViewNX-i version 1.2.0 or later. *
• An Electronic VR option has been added to the MOVIE SHOOTING MENU. Note that electronic vibration reduction is not available at frame sizes of 3840×2160 or 1920×1080 crop, and that the angle of view is slightly reduced when electronic vibration reduction is in effect. *
• A Flicker reduction option has been added to the PHOTO SHOOTING MENU. *
• Dynamic-area AF (9 points) has been added to the AF-area mode options available during viewfinder photography. *
• The chief changes to viewfinder photography autofocus are:
• Improved camera response when the button assigned Auto-area AF using Custom Setting f1 (Custom control assignment) > AF-area mode or AF-area mode + AF-ON is pressed to temporarily select auto-area AF.
• Improved tracking when Wide is selected for Custom Setting a5 (3D-tracking watch area) and 3D-tracking is selected for AF-area mode.
• The following changes have been made to the shooting display in the web browser when Silent photography is selected in HTTP server mode:
• An “SL” (“silent”) icon has been added to the release mode button.
• The “number of shots remaining” display for continuous release modes now shows the time remaining.
• Exposure compensation can now be adjusted by up to ±3.
• The file name (extension “.NDF”) is now displayed in HTTP server mode when Image Dust Off data are displayed in a web browser either full frame or in the image viewer.
• The web browser displays for computers, iPads, and Android OS now identify white balance presets 1 through 6 by number when preset manual white balance is selected in HTTP server mode.
• If movie recording is started while the camera is focusing in movie live view, the camera will now stop focusing before beginning recording.
• Fixed the following issues:
• The camera would sometimes record the date of recording incorrectly during leap years and the like.
• The Save/load settings option in the SETUP MENU would only load up to 10 of the up to 20 items that could be stored in “My Menu”.
• The camera would display the encryption key for Direct (access point) connections when searching for wireless networks using Search for wireless network with Direct (access point) selected in the SETUP MENU > Network connection wizard.
• The device would sometimes be unable to connect to the D5 when Connect and exit wizard was chosen with Direct (access point) selected in the SETUP MENU > Network connection wizard.
• The OS X edition of the Wireless Transmitter Utility would not function as expected when used to edit or add profiles for a camera connected via USB if Password protection was enabled for wireless or Ethernet LANs in the Network > Network settings menu.
• The camera would sometimes not correctly display pictures created using the Trim option in the RETOUCH MENU.
• If playback zoom was activated while the memory card access lamp was lit, the picture would sometimes not display correctly or the camera would zoom in on a point other than the active focus point if:
• RAW Slot 1 - JPEG Slot 2 was selected for Role played by card in Slot 2 in the PHOTO SHOOTING MENU,
• On was selected for Image review in the PLAYBACK MENU,
• Memory cards were inserted in Slots both 1 and 2, and
• The NEF (RAW) and JPEG images were different sizes

* Details can be found in an updated edition of the camera manual.

Download: Nikon D5 Firmware v1.10

B&H carries the Nikon D5.

From Nikon:

IMPORTANT: Firmware updates cannot be performed if Enable is currently selected for Network > Network connection in the SETUP MENU. Select Disable for Network connection before proceeding.

Changes from “C” Firmware Version 1.30 to 1.31

Fixed an issue that occurred with WR-R10 wireless remote controller firmware version 3.00. In rare cases, the camera would fail to display the number of exposures remaining or would take about a minute to power down when the WR-R10 was connected.

Download: Nikon D4s Firmware v.1.31

From Nikon:

Changes from “C” Firmware Version 1.10 to 1.11

• Fixed an issue that caused increased drain on the camera battery when the camera was off or in sleep mode with a GP-N100 GPS unit attached.

Download: Nikon 1 V3 Firmware v1.11

B&H carries the Nikon 1 V3.

Nikon has updated the D800's firmware to v1.01 and the D810's firmware to v1.11 with the following change:

• Fixed an issue that sometimes caused the camera to stop responding when attached to a WR-R10 wireless remote controller running firmware version 3.00.

Download: Nikon D800 Firmware v1.01 | Nikon D810 Firmware v1.11

From Nikon:

WR-1 Firmware v.1.01

Changes from Firmware Version 1.00 to 1.01:

• The D5 and D500 ISO sensitivity displays are now supported. If you are using two WR-1 units, one as a receiver and the other as a transmitter, update both to firmware version 1.01. If you are using the WR-1 with a WR-R10, have a Nikon-authorized service representative update the WR-R10 to firmware version 3.00.
• When used as a transmitter to change ISO sensitivity for a receiving camera, the WR-1 no longer cycles continuously through the available values.

Cameras That Can Be Used to Update WR-1 Firmware
D5, D4S, D4 (*), Df, D810A, D810, D800 (*), D800E (*), D750, D500, D7200, and D7100 cameras
* Firmware versions “A” 1.10/“B” 1.10 or later. Firmware upgrades can also be performed for you by a Nikon-authorized service representative.

Download: Nikon WR-1 Firmware v.1.01

Firmware Ver. 3.00 upgrade details

Shooting using radio-controlled advanced wireless lighting (hereafter "radio AWL") requires a digital SLR camera and Speedlight that support radio AWL, as well as a WR-R10. However, WR-R10s running a version of firmware prior to Ver. 3.00 do not support radio AWL. The modifications indicated below, including support for radio AWL, will be enabled with this firmware upgrade.

Modifications enabled with firmware Ver. 3.00

• Support for radio AWL has been added.
• Support for the D5 and D500 function that enables Link Mode (Pairing or PIN) for radio AWL has been added.
• Support for the D5 and D500 function that enables or disables the status LEDs on the WR-R10 has been added.
• The maximum number of devices with which the WR-R10 can be paired has been changed from 64 devices to 32.

Requesting firmware upgrade
Those who would like to have their WR-R10 firmware upgraded to enable support for radio AWL may take or send their WR-R10 to a Nikon authorized Service Center where the firmware will be upgraded free of charge.

Please direct inquiries regarding this matter to your nearest Image Nikon Service Center or create a Free Service Returns Request.

B&H carries the Nikon WR-1 and WR-R10 remote controllers.

Like the Nikon D3300, the D5300 and D5500 have recieved firmware v.1.01 updates to address similar issues.

Nikon D5300

Changes from “C” Firmware Version 1.00 to 1.01

• AF-P DX NIKKOR 18-55?mm f/3.5-5.6G VR and AF-P DX NIKKOR 18-55?mm f/3.5-5.6G lenses are now supported. Vibration reduction can be enabled or disabled using the new Optical VR option in the photo SHOOTING MENU, which is displayed when an AF-P DX NIKKOR 18-55?mm f/3.5-5.6G VR lens is attached.
• The following issues have been addressed:
• Choosing negative values for Exposure compensation in the RETOUCH MENU > NEF (RAW) processing display did not have the desired effect.
• Continued scrolling of the menus for some languages would cause the camera to freeze.

Download: Nikon D5300 Firmware v.1.01

Changes from “C” Firmware Version 1.00 to 1.01

• AF-P DX NIKKOR 18-55?mm f/3.5-5.6G VR and AF-P DX NIKKOR 18-55?mm f/3.5-5.6G lenses are now supported. Vibration reduction can be enabled or disabled using the new Optical VR option in the photo SHOOTING MENU, which is displayed when an AF-P DX NIKKOR 18-55?mm f/3.5-5.6G VR lens is attached. The CUSTOM SETTING MENU now contains an a5 Manual focus ring in AF mode option that can be enabled or disabled when an AF-P DX NIKKOR 18-55?mm f/3.5-5.6G VR or AF-P DX NIKKOR 18-55?mm f/3.5-5.6G is attached.
• The following issues have been addressed:
• Noise would occur at four-second intervals in audio output to external recorders connected via HDMI in movie live view.
• Choosing negative values for Exposure compensation in the RETOUCH MENU > NEF (RAW) processing display did not have the desired effect.
• Selecting ON for Exposure smoothing during interval timer photography would result in all shots after the first being overexposed.

Download: Nikon D5500 Firmware v.1.01

B&H carries the Nikon D5300 and D5500.

From Nikon:

Changes from “C” Firmware Version 1.00 to 1.01

• AF-P DX NIKKOR 18–55?mm f/3.5–5.6G VR and AF-P DX NIKKOR 18–55?mm f/3.5–5.6G lenses are now supported. Vibration reduction can be enabled or disabled using the new Optical VR option in the photo SHOOTING MENU, which is displayed when an AF-P DX NIKKOR 18–55?mm f/3.5–5.6G VR lens is attached.
• The following issues have been addressed:
• Turning Auto info display off had no effect at focal lengths over 55 mm.
• Choosing negative values for Exposure compensation in the RETOUCH MENU > NEF (RAW) processing display did not have the desired effect.

Download: Nikon D3300 Firmware v.1.01

B&H carries the Nikon D3300.

From Nikon:

Nikon D750 Firmware

Changes from “C” Firmware Version 1.02 to 1.10An External recording control option has been added to the HDMI item in the SETUP MENU. If the camera is connected via HDMI to a third-party recorder that supports the Atomos Open Protocol (the Atomos SHOGUN, NINJA2, or NINJA BLADE), selecting On allows camera controls to be used to start and stop recording. More information is available in a supplementary manual.Note:Choose an option other than 576p (progressive) or 480p (progressive) for HDMI > Output resolution in the SETUP MENU.

• Fixed the following issues:
• The brightness of the live view photography display would not change when a command dial was rotated to adjust exposure compensation with On (Auto reset) selected for b Metering/exposure > b3 Easy exposure compensation > Easy exposure compensation in the CUSTOM SETTING MENU.
• Although the preview button would stop the lens down to maximum aperture when assigned the Preview role, the maximum aperture indicator would not appear in the monitor.
• In rare cases, the shutter would not be released when the user attempted to take photographs in movie live view.
• About 4 seconds of static could be heard on audio recorded with external HDMI recorders during movie live view.
• The shutter speed, aperture, and ISO sensitivity displayed in the monitor during movie live view would differ from values in the final movie file.
• Part of the focus point would disappear if the user zoomed in while the framing grid was displayed.
• Volume could sometimes not be adjusted if movies were played with indicators hidden during full-frame playback (None (image only)).
• Exposure compensation would fail to produce the desired results if a negative value was selected when NEF (RAW) images were processed using the NEF (RAW) processing option in the RETOUCH MENU.
• Images would in rare cases fail to record correctly with HDR (high dynamic range) selected in the PHOTO SHOOTING MENU.
• If On was selected for Exposure smoothing during interval timer photography, every frame after the first would be overexposed.
• File numbers were not assigned in the proper sequence.
• The focus point would not be displayed in the correct location in the monitor.
• In some languages, characters or parts of characters would be missing from the SETUP MENU > Location data > Position display.
• In some languages, characters or parts of characters would be missing from the SETUP MENU > AF fine-tune > List saved values display.
• In some regions, nothing would be displayed when Conformity marking was selected in the SETUP MENU.
• Some help text has been changed.
• Optimal vibration reduction is now available with vibration reduction lenses.

Download Nikon D750 “C” Firmware Version 1.10

Changes from “C” Firmware Version 1.20 to 1.30

• An External recording control option has been added to the HDMI item in the SETUP MENU. If the camera is connected via HDMI to a third-party recorder that supports the Atomos Open Protocol (the Atomos SHOGUN, NINJA2, or NINJA BLADE), selecting On allows camera controls to be used to start and stop recording. More information is available in a supplementary manual.
  Note:
• Choose an option other than 576p (progressive) or 480p (progressive) for HDMI > Output resolution in the SETUP MENU.
• Choose an option other than Auto for HDMI > Output resolution in the SETUP MENU when 640x 424; 30p or 640x 424; 25p is selected for Movie settings > Frame size/frame rate in the SHOOTING MENU.
• Fixed the following issues:
• In rare cases, the shutter would not be released when the user attempted to take photographs in movie live view.
• About 4 seconds of static could be heard on audio recorded with external HDMI recorders during movie live view.
• Exposure compensation would fail to produce the desired results if a negative value was selected when NEF (RAW) images were processed using the NEF (RAW) processing option in the RETOUCH MENU.
• Images would in rare cases fail to record correctly with HDR (high dynamic range) selected in the SHOOTING MENU.
• In portrait orientation, the monitor would not show the focus point in the correct location if 5:4 (30x24) was selected for Choose image area.

Download Nikon D4S “C” Firmware Version 1.30

B&H carries the Nikon D750 and D4s DSLR cameras.

From Nikon:

Changes from “C” Firmware Version 1.02 to 1.10

• An External recording control option has been added to the HDMI item in the SETUP MENU. If the camera is connected via HDMI to a third-party recorder that supports the Atomos Open Protocol (the Atomos SHOGUN, NINJA2, or NINJA BLADE), selecting On allows camera controls to be used to start and stop recording. More information is available in a supplementary manual.
  Note: Choose an option other than 576p (progressive) or 480p (progressive) for HDMI > Output resolution in the SETUP MENU.
• Fixed the following issues:
• Incorrect distances were shown in the camera playback info display for photographs taken with an optional flash unit in distance-priority manual (GN) mode.
• The brightness of the live view photography display would not change when a command dial was rotated to adjust exposure compensation with On (Auto reset) selected for b Metering/exposure > b4 Easy exposure compensation > Easy exposure compensation in the CUSTOM SETTING MENU.
• Although the preview button would stop the lens down to maximum aperture when assigned the Preview role, the maximum aperture indicator would not appear in the monitor.
• In rare cases, the shutter would not be released when the user attempted to take photographs in movie live view.
• About 4 seconds of static could be heard on audio recorded with external HDMI recorders during movie live view.
• The shutter speed, aperture, and ISO sensitivity displayed in the monitor during movie live view would differ from values in the final movie file.
• Volume could sometimes not be adjusted if movies were played with indicators hidden during full-frame playback (None (image only)).
• Exposure compensation would fail to produce the desired results if a negative value was selected when NEF (RAW) images were processed using the NEF (RAW) processing option in the RETOUCH MENU.
• Images would in rare cases fail to record correctly with HDR (high dynamic range) selected in the SHOOTING MENU.
• If On was selected for Exposure smoothing during interval timer photography, every frame after the first would be overexposed.
• File numbers were not assigned in the proper sequence.
• In some languages, characters or parts of characters would be missing from the SETUP MENU > Location data > Position display.
• In some languages, characters or parts of characters would be missing from the SETUP MENU > AF fine-tune > List saved values display.
• Some help text has been changed.

Download: Nikon D810 Firmware v.1.10

B&H carries the Nikon D810 DSLR Camera.

From NIkon:

Nikon D7100

Changes from “C” Firmware Version 1.02 to 1.03

• Reduced noise (horizontal lines) in movies shot with 1280×720; 60p or 1280×720; 50p selected for Frame size/frame rate.
• Fixed an issue that sometimes caused the display to darken when images were viewed by pressing the (playback) button.
• Fixed an issue with the menus for some languages where continued scrolling would cause the camera to freeze.
• Fixed issues with the virtual horizon displayed using the Viewfinder virtual horizon option.
• Fixed an issue with the camera freezing when the Clean image sensor option was used.

Download Nikon D7100 Firmware v.1.03

Changes from “C” Firmware Version 1.02 to 1.03

• Reduced noise (horizontal lines) in movies shot with 1280×720; 60p or 1280×720; 50p selected for Frame size/frame rate.
• Fixed an issue with the camera freezing when the Clean image sensor option was used.

Download Nikon D5200 Firmware v.1.03

From Nikon:

Nikon D3200 Firmware v1.04

Changes from “C” Version Firmware 1.03

• Addressed an issue that caused the memory card access lamp to light longer than normal or the message “This memory card cannot be used. Card may be damaged. Insert another card” to be displayed while the memory card was accessed.

Download: Nikon D3200 Firmware v1.04

From Nikon:

Nikon 1 V3 Firmware v.1.10

Changes from “C” Version Firmware 1.00

Camera Control Pro 2 Version 2.22.0 is now supported, allowing the following operations to be performed:

• The settings for connected cameras can be adjusted from Camera Control Pro 2.
• The Camera Control Pro 2 live view window can now be used for still photography and movie recording as well as to select the AF-area and adjust camera settings.
• Camera Control Pro 2 now supports best moment capture.

Download: Nikon 1 V3 Firmware v.1.10

Changes from Firmware Version 2.3

• The D810A is now supported.

Cameras That Can Be Used to Update UT-1 FirmwareUT-1 firmware updates can be performed with the following cameras:

• The D810, D810A, D750, D7200, and D7100
• D800 and D800E firmware versions “A” 1.10/“B” 1.10 or later.

Note: Other cameras can not be used, but updates can be performed for you by a Nikon-authorized service representative.

Download: UT-1 Communication Unit Firmware Version 2.4

With one of the most vague descriptions I have ever seen in a firmware update, Nikon has released firmware version 1.01 for the D750.

From Nikon:

Changes from “C” Version Firmware 1.01

• Camera operation is now more reliable.

Download:
Nikon D750 Firmware v.1.01

B&H carries the Nikon D750 DSLR camera – now more reliable than ever. ;-)

From Nikon:

This service supplies software that can be used to update the D4S camera “C” firmware to version 1.20.

Before proceeding, select Firmware version in the camera setup menu and check the camera firmware version. You will not need to download or install this update if the firmware listed above is already installed.

Modifications in firmware v1.10

• Commander mode can now be selected for Custom Setting e3 (Optional flash) when an optional SB-500 flash unit is attached. *
• The Auto and Flash white-balance options can now be used with the LED light on the optional SB-500 flash unit.
• Auto white balance is now more consistent.
• There is no longer a limit on the number of shots that can be taken in a single burst at shutter speeds of 4 s or faster when a continuous-release mode is selected in exposure mode S or M. *
• There is no longer a limit on how long the shutter can remain open when “Time” is selected for shutter speed. *
• We have changed how focus points are displayed in the viewfinder if the camera is rotated between “wide” (landscape) and “tall” (portrait) orientations with Focus point and AF-area mode selected for Custom Setting a10 (Store by orientation) and different focus points chosen in each orientation. We have also changed how focus points are displayed in the viewfinder if a lens focus function button is pressed with AF-area mode selected for Custom Setting f19 (Lens focus function buttons).
• Some help text has been changed.
• The following issues have been resolved:

• If the user focused using the AF-ON button before shooting in continuous-release mode, the frame rate would drop under the following conditions: AF-S selected for focus mode, Single-point AF selected for AF-area mode, Focus selected for Custom Setting a2 (AF-S priority selection), and AF-ON only selected for Custom Setting a4 (AF activation).
• When an AF-S NIKKOR 800mm f/5.6E lens was attached, “Err” would be displayed in the top control panel and pictures could not be taken under some exposure conditions.
• Images would sometimes fail to display correctly during image review if playback zoom was used while the memory-card access lamp was lit.
• Images would not clear from the display if an optional WR-1 wireless remote controller was used with On selected for Image review in the playback menu.
• The camera photo info display would not show the correct range for pictures taken with an optional flash unit in distance-priority manual flash mode (GN).
• When pictures taken using a PC-E lens were viewed in Capture NX-D and other Nikon software, the Metadata would list the lens as type E rather than type D.
• The photo information display for movies, movie stills, and photos taken with the Silent shutter-release option would sometimes list incorrect values for shutter speed, aperture, and ISO sensitivity.
• If the camera was connected via HDMI to 4K a compatible TV, neither the camera nor the television would display menus correctly.
• Volume sometimes could not be adjusted if indicators were hidden during movie playback.
• If both XQD and CompactFlash cards were inserted in the camera when it was connected to a computer, the computer would not recognize the XQD card.

Download
Nikon D4S Firmare v1.10

B&H carries the Nikon D4s DSLR camera.