Nikon Camera Control Pro
From Nikon:
Nikon Camera Control Pro 2 v.2.26.0
Changes from Version 2.25.1 to 2.26.0
- Added support for the D850.
- The principal features added with the D850 are as follows:
- With the exception of some features, the controls on the D850 can now be used during live view.
- When recording movies to HDMI devices, users can now start and end recording via the Control HDMI External Recording option in the Camera menu.
- Custom Setting g2 (Highlight brightness) in the D850 Custom Settings menu can also now be accessed via the Custom Settings option in the Camera menu.
- The direction of the shading in the live view highlight display can now be changed using the Highlight display option.
- Added a Live View item to Options.
Download: Nikon Camera Control Pro 2 v.2.26.0
From Nikon:
Camera Control Pro - 2.18.0 Update
Precautions
- This updater software updates Camera Control Pro 2.13.0 -2.17.0 to 2.18.0.
- Camera Control Pro 2.13.0 - 2.17.0 must be installed before running this software.
- When this updater software is run, it may be necessary to enter the product key again to confirm ownership of a previous version of the software.
- On a Macintosh running Mac OS X version 10.7-10.9, run this updater software and then enter the application’s product key.
- Turn off all virus-scanning software and exit Camera Control Pro 2, or any other application that may be running, before proceeding with this installation.
- You must have Administrator authority to run this updater software on a Windows computer. You must enter the Admin password to run this updater software on a Macintosh computer.
- This updater software cannot be used to install a different language version, or to modify the language version, of the application currently installed.
Updates included with this release, 2.18.0
Modifications that apply to both the Windows and Macintosh versions
- Support for the D810 has been added.
- Highlight-weighted has been added to Metering options in the Exposure 2 tab (available only when the D810 is used).
- Metering options have been added to the Movie tab (available only when the D810 is used).
- Flat has been added to Picture Control options in the Image Processing tab. (available only when the D810 is used).
- A Clarity setting has been added to the adjustment dialog displayed when the Edit... button in the Image Processing tab is clicked. (available only when the D810 is used).
- A Show Capture NX-D option has been added to the Tools menu.
Additional modifications to the Windows version
- Windows XP is no longer supported.
Additional modifications to the Macintosh version
- Mac OS X version 10.6 is no longer supported.
Download Camera Control Pro - 2.18.0 Update – Windows | Macintosh
Wireless Transmitter Utility 1.5.1
Modifications enabled with version 1.5.1
Modifications that apply to both the Windows and Macintosh versions
- Support for the D810 has been added.
- Support for the Communication Unit UT-1 Firmware Ver. 2.1 has been added.
Additional modifications to the Windows version
- Windows XP is no longer supported.
Download Wireless Transmitter Utility 1.5.1 – Windows| Macintosh
B&H has the Nikon D810 DSLR Camera available for preorder.
From Nikon:
Camera Control Pro 2.17.0 full version / trial
Precautions:
- This updater software updates Camera Control Pro 2.13.0 –2.16.0 to 2.17.0.
- Camera Control Pro 2.13.0 – 2.16.0 must be installed before running this Updater Software.
- When this updater software is run, it may be necessary to enter the product key again to confirm ownership of a previous version of the software.
- On a Macintosh running Mac OS X version 10.7–10.9, run this updater software and then enter the application’s product key.
- Turn off all virus-scanning software and exit Camera Control Pro 2, or any other application that may be running, before proceeding with this installation.
- You must have Administrator authority to run this updater software on a Windows computer. You must enter the Admin password to run this updater software on a Macintosh computer.
- This updater software cannot be used to install a different language version, or to modify the language version, of the application currently installed.
Updates included with this release, 2.17.0
- Support for the D4S has been added.
- When both of the following conditions are met, and the Transfer only JPEG to PC option in the Storage tab is checked, users can now transfer only JPEG copies to the computer:
- RAW + FINE, RAW + NORMAL, or RAW + BASIC is selected for Image Quality (D4S only)
- PC + CARD is selected for Record to
Download:
Camera Control Pro 2.17.0 - Windows | Macintosh
Wireless Transmitter Utility 1.5.0
Precautions:
- This software is provided to those who agree to the terms of the software license at the bottom of this page. When the user selects the Accept and begin download option outside of the frame, agreement to the terms of the software license is inferred. Be sure that you have read and understand the terms of the license agreement before initiating download of this software.
- Turn off all virus-scanning software and exit the Wireless Transmitter Utility, or any other application that may be running, before proceeding with this installation.
- You must have Administrator authority to run this software on a Windows computer. You must enter the Admin password to run this software on a Macintosh computer.
- When this software is used in combination with the WT-4, be sure that firmware Ver. 1.1 has been installed on the WT-4, and that Thumbnail Selector Ver. 1.3.0 has been installed on the computer. In addition, if using the D3 be sure that the camera’s A and B firmware are Ver. 2.02. If using the D300 be sure that the camera’s A and B firmware are Ver. 1.10. If firmware/software version(s) are older version(s), be sure to download the latest version(s) from our website and perform the necessary updates.
- WT-4 Thumbnail select mode and Print mode are not supported.
- When this software is used in combination with the D7100 and UT-1, be sure that firmware version 1.1 has been installed on the UT-1 (installation requires D7100 at this time).
- When installing this software under Windows 8, Windows 7 or Windows Vista, a Windows Security dialog will be displayed two or three times. Click Install to continue with the installation.
- When installing this software on a computer running Windows XP, a warning message regarding software installation will be displayed. Click Continue Anyway to continue with the installation.
- When installing this software on a computer to which the WT-4 Setup Utility has already been installed, uninstall the WT-4 Setup Utility before installing this software.
- Those upgrading from the WT-4 Setup utility or the Wireless Transmitter utility 1.3.0, and to which any of the following apply, must create network profiles again after installing this software before it can be used.
- Those using the D4 with the WT-5 or an Ethernet connection in image transfer mode or camera control mode.
- Those using the WT-4 (except for connection to an FTP server in transfer mode)
- Be sure to read the sections below before downloading this software.
Precautions for use with the UT-1
- Modes are limited to the connection modes supported by the UT-1:
- Transfer Mode and PC mode
- Thumbnail Mode and Print Mode are NOT supported
- When the Wireless Transmitter Utility is launched to create a network profile for use with the D4, D800, D800E, or D7000, always select the WT-4/ UT-1 (functions as a WT-4) option in the Select hardware dialog. When the UT-1 is used with the WT-5, select the WT-5 (Wireless LAN) option.
- When using the UT-1 with the D4, always set Network> Choose Hardware in the camera setup menu to WT-4.
Updates that apply to both the Windows and Macintosh versions
- Support for the D4S has been added.
Additional updates to the Windows version
- Support for 64- and 32-bit versions of Windows 8.1, Windows 8.1 Pro, and Microsoft Windows 8.1 Enterprise has been added.
Additional updates to the Macintosh version
- Support for OS X version 10.9.1 has been added.
- Mac OS X version 10.6.8 is no longer supported.
Download
Wireless Transmitter Utility 1.5.0 - Windows | Macintosh
From Nikon:
Modifications enabled with version 2.13.0
- Support for the D5200 has been added.
- When the focus area displayed in the Camera Control Pro 2 live view window is double-clicked with autofocusing in live view mode, the camera will now focus automatically*.
* The camera will not focus automatically with the following cameras when Hand-held is selected for Live view mode: D3-series cameras, D700, and D300-series cameras
Additional modifications to the Windows version
- Compatibility with 32- and 64-bit versions of Windows 8, Windows 8 Pro, and Windows 8 Enterprise has been added. However, under 64-bit versions, this software operates as a 32-bit application.
Additional modifications to the Macintosh version
- Support for OS X version 10.8 has been added.
- Support for Mac OS X version 10.5 has been eliminated.
From Nikon:
Precautions
- This updater will update Camera Control Pro 2.13.0 or later to 2.16.0.
- You must have Camera Control Pro 2.13.0 or later installed to perform this update.
- It may be necessary to enter your product key code (s) during installation. Please have your product key code(s) available for installation.
- You may be required to enter your computer's administrator password to use this installer. Be sure to have that information available.
Modifications enabled with version 2.16.0
Modifications that apply to both the Windows and Macintosh versions
- Support for the Nikon D5300 and the Df has been added.
From Nikon USA:
Modifications enabled with this version
- Support for the Nikon D610 has been added.
Update Notes:
- You must have Camera Control Pro 2.13.0 or later installed to perform this update.
- It may be necessary to enter your product key code(s) during installation. Please have your product key code(s) available for installation.
- You may be required to enter your computer's administrator password to use this installer. Be sure to have that information available.
Download
Nikon Camera Control Pro 2.15.0 - Windows (57.7 MB) | Macintosh (49.2 MB)
From Nikon USA:
Modifications enabled with version 2.13.0
- Support for the D5200 has been added.
- When the focus area displayed in the Camera Control Pro 2 live view window is double-clicked with autofocusing in live view mode, the camera will now focus automatically.
- However, the camera will not focus automatically with the following cameras when Hand-held is selected for Live view mode.
- D3-series cameras, D700, and D300-series cameras
Additional modifications to the Windows version
- Compatibility with 32- and 64-bit versions of Windows 8, Windows 8 Pro, and Windows 8 Enterprise has been added. However, under 64-bit versions, this software operates as a 32-bit application.
Additional modifications to the Macintosh version
- Support for OS X version 10.8 has been added.
- Support for Mac OS X version 10.5 has been eliminated.
Download the Camera Control Pro 2.13.0 update: Windows | Macintosh
Nikon Camera Control Pro 2.12.0 Updater is now available for download.
Additional modifications to the Windows version
- Reverse indicators options have been added to the General tab in the Options dialogue box (Tools menu > Options...), allowing users to reverse indicator display
Additional modifications to the Macintosh version
- PowerPC models are no longer supported.
- Reverse indicators options have been added to the General tab in the Preferences dialogue box (Camera Control Pro 2 menu > Preferences...), allowing users to reverse indicator display.
- When the computer entered sleep mode with a camera connected and Camera Control Pro 2 running, camera connection was sometimes not recognized when the computer recovered from sleep mode. This issue has been resolved.
Nikon Camera Control Pro 2.11.1 Updater for Macintosh is now available for download.
Modifications enabled in this version
An issue that prevented Camera Control Pro 2 recognising the D4 on Macintosh computers equipped with a PowerPC processor has been resolved.
Capture NX v2.2.7 Updater (Nikon USA)
Capture NX v2.2.7 Updater (Nikon Europe)
Camera Control Pro 2.9.0 Updater (Nikon USA)
Camera Control Pro 2.9.0 Updater (Nikon Canada)
Camera Control Pro 2.9.0 Updater (Nikon Europe)
Capture NX 2.2.7 Updater
Support for RAW images captured with the D5100 has been added.
The following issues have been resolved.
In some rare cases, when the Highlight Protection function under Quick Fix in the Develop section of the Edit List was applied to RAW images, edges around highlights were darkened.
When the Image Dust Off function under Camera & Lens Corrections in the Develop section of the Edit List was applied to reduce reflection of dust on the image sensor in images, the results of this dust reduction were sometimes noticeable.
When RAW images captured with the camera’s auto distortion control function enabled were opened, or the Auto Distortion function under Camera & Lens Corrections in the Develop section of the Edit List was set to Automatic for a RAW image, Capture NX 2 sometimes quit unexpectedly.
RAW images sometimes could not be opened, or, when attempting to open a RAW image, Capture NX 2 sometimes quit unexpectedly.
Mac OS X only - When an image was saved with Capture NX 2, time of the Date Created information recorded to Exif data was sometimes not correct.
Camera Control Pro 2.9.0 Updater
Support for the D5100 has been added. However, the Custom Settings dialog, available from the Camera menu, cannot be used.
Support for the following D5100 features has been added.
- Shooting using the High Dynamic Range (HDR) feature
- Shooting in Special Effects mode
(However, still images cannot be captured and movies cannot be recorded in Special Effects mode when live view mode is enabled.)
Support for Mac OS X version 10.6.6 has been added.
Nikon Europe has posted ViewNX 2.0.3 and Camera Control Pro 2.8.0 for download.
ViewNX 2.0.3 Full Version - Win
ViewNX 2.0.3 Full Version - Mac
Camera Control Pro 2.8.0 Updater - Win
Camera Control Pro 2.8.0 Updater - Mac
Important announcement regarding illegaly sold Nikon software product keys
It has come to our attention that product keys for Nikon software are being illegally sold and distributed from websites. We have confirmed the illegal sale and/or distribution of product keys for, as well as the unauthorised use of, the following products.
- Capture NX
- Capture NX 2
- Camera Control Pro
- Camera Control Pro 2
When unauthorised software use is confirmed in relation to the software license agreement, measures that prevent the use of Nikon software are implemented. Please contact Nikon if you believe that you have purchased an authentic product key, but the software indicates that the product key is unauthorized and the software can no longer be used.
When purchasing Nikon software, Nikon recommends purchasing CD package versions from stores and/or online retailers authorised to handle Nikon products, or from Nikon's own online shop (limited availability). Nikon's own online shop is the only online source for authentic Nikon software product keys. Nikon does not sell product keys for its software applications from any other e-commerce website.
Be aware that Nikon cannot be held responsible for any loss in profit or income resulting from the use of unauthorized product keys, except in cases where legal liability can be proven.
For more information regarding this matter, contact the Nikon Support Centre.
 |
|