Canon Firmware Updates (Page 15)
Canon EOS 5D Mark III Firmware Version 1.1.2 is now available for download.
Firmware Version 1.1.2 incorporates the following improvements and fixes.
- Supports a new accessory, GPS receiver GP-E2.
- Fixes a phenomenon where a pink cast may develop over the image when the shutter is completely pressed with the camera’s power turned off (by the auto power off setting).
- Fixes a phenomenon where the camera operation stops after one shot when shooting in High Dynamic Range (HDR) mode.
- Fixes a phenomenon where the Shooting Date/Time in the EXIF data of the image shows a later time than the actual shooting time.
- Fixes the time zone for the Samoa Islands.
- Corrects errors in the Finnish menu screen. (Products for the Japanese market do not display the Finnish menu.)
Canon has posted EOS 1D Mark IV Firmware v1.1.1. Note: you must select your OS to get the firmware download option.
Firmware Version 1.1.1 incorporates the following change.
Optimizes the camera’s exposure accuracy when using EF 24mm f/2.8 IS USM and EF 28mm f/2.8 IS USM lenses, which are scheduled for release in June 2012.
If these lenses are used with an EOS-1D Mark IV camera that has not been updated with the new firmware, the image may be overexposed depending on the subject and shooting scene.
Canon USA has EOS 5D Mark II Firmware Version 2.1.2 available for download.
Firmware Version 2.1.2 incorporates the following change.
1. Optimizes the camera’s performance when using certain UDMA 7-compatible CF cards released in February 2012 or later.
Canon has made EOS Rebel T3i/600D Firmware Version 1.0.2 and EOS Rebel T3/110D Firmware Version 1.0.5 available for download.
Firmware Version 1.0.2 incorporates the following fixes and improvements:
1. Fixes a phenomenon in which the AF does not function and the shutter cannot be released during Live-view shooting when the Speedlite 270EX II is attached.
2. Corrects wording in the Italian and Portuguese language menu screens.
Canon USA has made EOS 5D Mark II Firmware Version 2.1.1 available for download.
Firmware Version 2.1.1 incorporates the following fixes and improvements:
1. Fixes a phenomenon where shooting stops after capturing one image when in continuous shooting or the Auto Exposure Bracketing (AEB) continuous shooting setting.
2. Corrects wording in the Dutch language menu screen.
Canon has posted EOS 60D Firmware Version 1.1.0.
Firmware Version 1.1.0 incorporates the following fixes and improvements.
1. Fixes a phenomenon where the wireless built-in flash settings are reset to defaults when the battery is removed from the camera.
2. Fixes an intermittent phenomenon where image-rotation information is not recognized correctly when shooting with the camera in the vertical position depending on the timing of the shutter release.
Canon has posted EOS 50D DSLR Firmware Version 1.0.8
Firmware Version 1.0.8 incorporates the following improvements and fixes.
1. Improves the writing/reading speeds when using UDMA 7-compatible CF cards.
2. Fixes incorrect indications in the Simplified Chinese, Traditional Chinese, Arabic, Swedish, Spanish, Portuguese, Thai and Turkish menu screens.
Canon has released EOS Rebel T1i / 500D DSLR Firmware Version 1.1.1 (Thanks Adarsha).
Firmware Version 1.1.1 incorporates the following fixes.
1. Fixes incorrect indications in the Arabic and Portuguese menu screens.
Canon USA has posted Canon EOS-1D Mark IV firmware version 1.1.0.
Firmware Version 1.1.0 incorporates the following improvements and fixes:
Improves writing/reading speeds when using UDMA 7-compatible CF cards.
Fixes a phenomenon where the ability to shoot movies may be stopped under the following conditions:
When using high-capacity (32 GB or greater) CF cards with little available space remaining and the user attempts to start shooting movies; or
When the camera’s battery is removed and reinserted into the camera and the user immediately attempts to start shooting movies.
Corrects misspellings in the menu screens displayed in Arabic and Portuguese languages (applies to models outside of the the Japanese market only).
Canon Asia has posted Canon EOS 5D Mark II Firmware Version 2.0.9.
Firmware Version 2.0.9 incorporates the following improvements and fixes.
1. Improves writing/reading speeds when using UDMA 7-compatible CF cards.
2. Fixes a phenomenon where the IS function will not work when custom function C.Fn III-2 is set to [5: IS start] and the lens attached does not have an AF stop button. This is because custom function C.Fn III-2 allows users to assign IS start to the AF stop button on the lens
3. Corrects misspellings in the menu screens displayed in Arabic, Portuguese, Spanish, and Thai languages.
Canon has posted EOS Rebel T3i / 600D Firmware Version 1.0.1.
Firmware Version 1.0.1 incorporates the following fixes and changes.
1. Clarifies the feature guide description of the digital zoom function for movie-shooting that appears on the camera’s LCD monitor.
2. Fixes a phenomenon in which, in rare cases, a computer connected to the camera with a USB cable cannot recognize the camera.
The EOS 7D firmware update first made available last week by Canon UK, then removed, is now available again.
Canon USA has posted EOS 7D firmware version 1.2.5. Canon UK also has it available once more: Mac OS X | Windows
Firmware Version 1.2.5 incorporates the following improvements and fixes.
1. Fixed a rare phenomenon in which there were rare cases where movie files taken could not be opened when repeatedly shooting movies with specific CF cards.
2. Fixed a rare phenomenon in which there were cases where "Err 02" appeared when repeatedly shooting still images with specific CF cards.
3. Fixed a phenomenon that occurred when using high-capacity (32 GB or greater) CF cards: If either a CF card with only a little available space remaining or the battery was removed and then reinserted into the camera, and then the user attempted to start shooting movies immediately, shooting would stop.
4. Improved the writing/reading speeds when using UDMA 7-compatible CF cards.
5. Fixed a phenomenon that occurred when custom function C.Fn 4-1 was set to assign IS start to the AF stop button on the lens: When used with lenses that do not have an AF stop button, the IS function would not work.
6. Corrected some mistakes in the menu screens displayed in Arabic and Portuguese. (This applies to models in overseas markets. The models for the Japanese market do not display those languages.)
(thanks Paul)
UPDATE: The EOS 7D firmware update has been removed from Canon UK's site.
Canon UK has posted EOS 7D firmware version 1.2.5: Mac OS X | Windows
Firmware Version 1.2.5 incorporates the following improvements and fixes.
1. Fixed a rare phenomenon in which there were rare cases where movie files taken could not be opened when repeatedly shooting movies with specific CF cards.
2. Fixed a rare phenomenon in which there were cases where "Err 02" appeared when repeatedly shooting still images with specific CF cards.
3. Fixed a phenomenon that occurred when using high-capacity (32 GB or greater) CF cards: If either a CF card with only a little available space remaining or the battery was removed and then reinserted into the camera, and then the user attempted to start shooting movies immediately, shooting would stop.
4. Improved the writing/reading speeds when using UDMA 7-compatible CF cards.
5. Fixed a phenomenon that occurred when custom function C.Fn 4-1 was set to assign IS start to the AF stop button on the lens: When used with lenses that do not have an AF stop button, the IS function would not work.
6. Corrected some mistakes in the menu screens displayed in Arabic and Portuguese. (This applies to models in overseas markets. The models for the Japanese market do not display those languages.)
Canon U.S.A. has posted Canon EOS 60D Firmware 1.0.9.
Firmware Version 1.0.9 incorporates the following fixes and changes.
1. Changes the name of the feature called "Art Filters" to "Creative Filters" (which is used in markets other than Japan) in the Japanese version to make the terms consistent. (This change only applies to the Japanese version and does not apply to other language versions.)
2. Fixes a phenomenon where the camera may operate abnormally when it is set to Quick Mode AF during Live View shooting immediately after capturing an image with the C.Fn II-1 Long exposure noise reduction setting set to [2: On] and a shutter speed setting of 5 seconds or more.
3. Fixes a phenomenon where the camera may operate abnormally when after Live View shooting, the remote switch on the EOS Utility screen is pressed to immediately start movie-shooting. This phenomenon only occurs when the camera is connected to a compatible personal computer and the Remote Live View function of EOS Utility software is being used.
Firmware Update Version 1.0.8 is now available for the Canon EOS 60D.
Firmware version 1.0.8 incorporates the following fix:
Fixes a phenomenon in which captured images may become overexposed when using the camera's built-in flash or an external Speedlite in combination with the lenses listed below:
a) EF300/4 L IS USM
b) EF28-135/3.5-5.6 IS USM
c) EF75-300/4-5.6 IS USM
d) EF100-400/4.5-5.6 L IS USM
Canon EOS 7D Firmware Update Version 1.2.3 is now available.
Firmware version 1.2.3 incorporates the following fixes.
1. Fixes a phenomenon in which the settings of the Speedlite Transmitter ST-E2 revert to the default settings when both the camera and the ST-E2 are set to auto power off.
2. Fixes a phenomenon in which the Macro Ring Lite (MR-14EX, MT24-EX) and slave flashes do not sync while shooting wirelessly.
Canon EOS Rebel T2i / 550D Firmware Update Version 1.0.9 is now available.
Firmware version 1.0.9 incorporates the following fixes.
1. Fixes a phenomenon in which tone jumps become noticeable in some images, depending on the shooting scene, when shooting with the Auto Lighting Optimizer settings (Low / Standard / Strong).
Canon has posted EOS 5D Mark II Firmware Update Version 2.0.8.
This firmware update (Version 2.0.8) incorporates the following changes and fixes.
1. Fixes a phenomenon in which movies are not taken at the shooting mode registered in the user's settings if a shooting mode Aperture priority (or Shutter priority) is registered in any of the camera's user settings (C1, C2, C3) and the user attempts to shoot a movie.
2. Fixes a phenomenon in which the shutter will not release when pressing the shutter button when the auto power off function is set to "on".
3. Fixes a phenomenon in which overexposure occurs when shooting a Live View shooting simulation with the ISO speed set to L.
4. Fixes a phenomenon in which the settings of the Speedlite transmitter ST-E2 revert to the default settings when both the camera and the ST-E2 are set to auto power off.
5. Fixes a phenomenon in which the Macro Ring Lite (MR-14EX, MT-24EX) and slave flash do not sync while shooting wirelessly.
Canon EOS Rebel XS / 1000D Firmware Version 1.0.7 is now available for download.
Firmware Version 1.0.7 incorporates the following fixes.
1. Fixes a rare phenomenon in which "Cannot create folder" is displayed on the camera's LCD monitor, after which shooting is no longer possible with the SD card in your camera.
Canon has released EOS 7D Firmware Version 1.2.2.
Firmware Version 1.2.2 incorporates the following fixes.
1. Fixes a phenomenon in which the set aperture moves when shooting movies in manual exposure mode using some Canon lenses (such as macro lenses).
2. Fixes the AF point-selection behavior of the C.Fn III-7 (Manual AF pt. selec. pattern) custom function when set to [1].
3. Fixes the AF point display for the viewfinder electronic level when shooting in the vertical position.
4. Corrects misspellings in the Spanish and Thai menus for applicable products.
 "Share on Pinterest!"){kind=small}
 |
|