Canon Firmware Updates (Page 12)

From Canon:

Canon WFT-E7 Wireless File Transmitter

Firmware Version 1.2.0 incorporates the following improvement:

• Support has been added for the EOS 5Ds / EOS 5Ds R.

Please note that an interface cable is required in order to update the WFT-E7 to Firmware Version 1.2.0.

Connection Requirements:
In order to connect the Canon WFT-E7 with the Canon EOS 5Ds / EOS 5Ds R the following items are needed:

Firmware Version 2.0.0 incorporates the following fixes and improvements:

• Fixes a phenomenon, in which, in rare cases, the signal acquisition indicator on the GPS Receiver GP-E2 display “Slow blinking (Signal acquired)” even if a signal is not yet acquired.
• Fixes a phenomenon in which new log files may not be saved correctly if the built-in memory of the GPS Receiver GP-E2 becomes full.
• Support for the EOS Rebel T6s/EOS 760D and EOS Rebel T6i/750D cameras has been added.
• Support for the EOS 5DS and EOS 5DS R cameras has been added.

To update the firmware of this product, Canon’s Map Utility software that is bundled with GPS Receiver GP-E2 is required. Furthermore, before updating the firmware, use Map Utility to save any GPS log files in the GP-E2’s built-in memory to your computer. After the GPS log files are saved to your computer, make sure to delete the log files from the built-in memory of the GPS Receiver GP-E2 before updating the firmware.

Download: Firmware Version 2.0.0 for the GPS Receiver GP-E2

B&H carries the Canon WFT-E7 Wireless File Transmitter and GPS Receiver GP-E2.

Canon USA has posted a firmware update for the Canon EOS 7D Mark II:

Details

Firmware Version 1.0.4 incorporates the following fixes:

• Fixes a phenomenon in which the camera’s AF function may not operate properly at a focal length of approximately 100mm when used with the EF 70-200mm f/2.8L IS II USM lens.
• Fixes a phenomenon in which, in rare instances, the reduction of the flicker effect cannot be achieved when in AI servo AF mode, despite the “Anti-flicker shoot” function being set to “Enable”.
• Fixes a phenomenon in which the Picture Style settings may not be applied to the captured image when the camera is set to custom shooting mode C1, C2 or C3.
• Fixes a phenomenon in which, in very rare cases, the first still image captured in live view mode may not record the correct date and time.
• Fixes a phenomenon in which, in very rare cases, image noise may appear in JPEG images when brightness or contrast is corrected by the Auto Lighting Optimizer function.

Firmware Version 1.0.4 is for cameras with Firmware Version 1.0.2 or earlier. If the camera's firmware is already Version 1.0.4, it is not necessary to update the firmware.

Download

Firmware version 1.0.4 can be downloaded here.

From Canon USA:

Canon EOS Rebel T5i Firmware v. 1.1.4

Firmware Version 1.1.4 incorporates the following fixes and improvements:

1. Fixes a phenomenon in which focus may not be adjusted with specific lenses when shooting remotely with EOS Utility software.
2. Fixes a phenomenon in which “LCD brightness” may not be adjusted after pressing the SET button if “Menu Display” is assigned to the SET button in the Custom Functions setting (C.Fn-7).
3. Enhances the reliability of the built-in flash exposure.

Firmware Version 2.0.0 incorporates the following fixes and improvements:

1. Fixes a phenomenon, in which the signal acquisition indicator on the GPS Receiver GP-E2 display “Slow blinking (Signal acquired)” even if a signal is not yet acquired.
2. Fixes a phenomenon, where new log files may not be saved correctly if the built-in memory of the GPS Receiver GP-E2 becomes full.
3. Support for the EOS Rebel T6s/EOS 760D and EOS Rebel T6i/750D cameras has been added.

When updating the firmware of the GPS Receiver GP-E2, please review the instructions thoroughly before you download the firmware.

Please note:
To update the firmware of this product, Canon’s Map Utility software that is bundled with GPS Receiver GP-E2 is required. Furthermore, before updating the firmware, use Map Utility to save any GPS log files in the GP-E2’s built-in memory to your computer. After the GPS log files are saved to your computer, make sure to delete the log files from the built-in memory of the GPS Receiver GP-E2 before updating the firmware.

Download:
GPS Receiver GP-E2 Firmware v. 2.0.0

Canon as released an updated firmware for its EOS 1D C Cinema camera. The new firmware version 1.3.9 incorporates the same improvements and fixes as the recent 1D X firmware update, except the firmware is not downloadable.

In order to upgrade the EOS 1D C firmware, you must send the camera to a regional service center.

From Canon:

Support
Canon USA will perform this firmware update on the EOS-1D C Cinema EOS Camera free of charge. Shipping and handling charges may apply. Please contact the Canon Customer Service and Support Center for details.

From Canon:

Thank you for using Canon products.

Details

Firmware Version 2.0.7 incorporates the following functional improvements and fixes:

1. Improves the AF controllability when shooting in Live View mode with a wide-angle lens (fixed focal length or zoom).
2. Fixes a phenomenon in which, when shooting long exposures (several minutes), vertical lines appear on the right edge of captured images (still photos).
3. Fixes a phenomenon in which the Auto Exposure Bracketing (AEB) may not perform as intended when in continuous shooting mode and where the shutter speed is longer than 1 second.
4. Improves the reliability of the control mechanism for the Picture Style Auto setting.
5. Fixes a phenomenon in which the electronic level indicator does not work correctly.
6. Fixes a phenomenon in which, when using the “Save and read camera settings” function, the color space data that is selected in “Custom shooting mode (C1-C3)” is not saved. *1
7. Corrects some incorrect indications on the “English” and “Russian” menu screens.

Firmware Version 2.0.7 is for cameras with Firmware Version 2.0.3 or earlier. If your camera's firmware is already Version 2.0.7, it is not necessary to update the firmware.
The firmware update takes approximately seven minutes.

Notes:
Once the EOS-1D X camera is updated to Version 2.0.7, it cannot be restored to a previous firmware version (Versions 1.0.2 through 2.0.3).

Once the EOS-1D X camera is updated to firmware Version 2.0.7 from previous firmware version (Versions 1.0.2 through 1.2.4 and 2.0.3), it is recommended that the latest application software *1 be used. Certain previous versions of this application software do not support functions which are added by the new firmware.
You can download the latest application software from our Web site.
*1: EOS Utility version 2.14.10a or later (Supported OSes: Windows 8/ 7 / 7 SP1 / VistaSP2 / XP SP3, Mac OS X v10.9 / 10.8 / 10.7 / 10.6)
*1: Digital Photo Professional version 3.14.46 or later (Supported OSes: Windows 8 / 7 / 7 SP1 / Vista SP2 / XP SP3, Mac OS X v10.6 / 10.7/ 10.8/ 10.9)

The instruction manual has been revised to accommodate the improvements and fixes provided as of firmware Version 2.0.3 or later.

Support

Download Firmware Version 2.0.7 for the EOS 1DX.

Download the latest instruction manual from our Website.

Download the latest application software from our Website.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Canon EOS-1D X Review | Buy at B&H

From Canon:

Thank you for using Canon products.

Details

Firmware Version 1.3.3 incorporates the following improvement and fix:

1. Improves the AF controllability when shooting in Live View mode with a wide-angle lens (fixed focal length or zoom).
2. Corrects some incorrect indications on the “English” and “Russian” menu screens.

When updating the firmware of your camera, please first review the instructions thoroughly before downloading.

Note:
Once the EOS 5D Mark III camera is updated to Version 1.3.3, it cannot be restored to a previous firmware version (Versions 1.0.7 through 1.2.3).

Support

Download Firmware Version 1.3.3 for the EOS 5D Mark III Camera

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Canon EOS 5D Mark III Review | Buy at B&H

From Canon:

Affected Product
EOS 6D Digital SLR Cameras

Details
Firmware Version 1.1.6 incorporates the following fixes:

1. Fixes a phenomenon in which the camera may not first use the center AF point to focus, when the AF point selection is set to automatic in AI Servo AF mode.
2. Fixes a phenomenon in which focus cannot be finely adjusted with specific lenses when shooting remotely with EOS Utility software.
3. Corrects some Ukrainian language displayed on the menu for ISO Setting.

Please note: After the firmware update has been performed the following setting will be reset to default.
Menu > Custom Function> C.Fn II: Autofocus > AF Microadjustment> 1: All by same amount

When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.

Support
Download Firmware Version 1.1.6 for the EOS 6D Camera

Thank you,
Customer Support Operations
Canon U.S.A., Inc

From Canon:

Firmware Version 1.0.5.1.00 for EOS C500 incorporates the following improvements and fixes.

For EOS C500

1. Compatibility with the Canon RC-V100 Remote Controller (expected to be available in June 2014) has been added.
2. Peripheral illumination correction data has been added for the [CN-E35mm T1.5 L F] EF Cinema lens and the [EF-S55-250mm f4-5.6 IS STM] EF lens.
3. Fixes a phenomenon in which the EF Cinema lens’ F number was incorrectly displayed.

For EOS C500 PL

1. Compatibility with the Canon RC-V100 Remote Controller (expected to be available in June 2014) has been added.

Support
Download Firmware Version 1.0.5.1.00 for the EOS C500 / C500 PL.

Firmware Version 1.0.4.1.00 for the EOS C100 incorporates the following improvements and fixes.

1. Compatibility with the Canon RC-V100 Remote Controller (expected to be available in June 2014) has been added.
2. Peripheral illumination correction data has been added for the [CN-E35mm T1.5 L F] EF Cinema lens and the [EF-S 55-250mm f4-5.6 IS STM] EF lens.
3. Fixes a phenomenon in which the EF Cinema lens’ F number was incorrectly displayed.

Note: Firmware Version 1.0.4.1.00 is only for EOS C100 cameras without the Dual Pixel CMOS AF Feature Upgrade. If the EOS C100 camera has had the DAF Feature Upgrade applied, please download Firmware Version 2.0.4.1.00.

Support
Download the new version of the Instruction Manual for the EOS C100 which provides more information on the new features and benefits available in this firmware update.

Download Firmware Version 1.0.4.1.00 for the EOS C100.

Firmware Version 2.0.4.1.00 for the EOS C100 incorporates the following improvements and fixes.

1. Compatibility with the Canon RC-V100 Remote Controller (expected to be available in June 2014) has been added.
2. Peripheral illumination correction data has been added for the [CN-E35mm T1.5 L F] EF Cinema lens and the [EF-S 55-250mm f4-5.6 IS STM] EF lens.
3. Fixes a phenomenon in which the EF Cinema lens’ F number was incorrectly displayed.

Note: Firmware Version 2.0.4.1.00 is only for EOS C100 cameras with the Dual Pixel CMOS AF Feature Upgrade applied. If the EOS C100 camera does not have DAF Feature Upgrade applied, please download Firmware Version 1.0.4.1.00.

Support
Download the new version of the Instruction Manual for the EOS C100 which provides more information on the new features and benefits available in this firmware update.

Download Firmware Version 2.0.4.1.00 for the EOS C100.

B&H carries the Canon EOS C100 and C500 Cinema Cameras.

From Canon USA:

Details
Firmware Version 1.3.5 incorporates the following improvements.
Fixes a phenomenon in which the line-level audio input function of some EOS-1D C cameras does not operate as expected with Firmware Version 1.3.4.

Affected Product
The phenomena described above will occur in cameras running Firmware Version 1.3.4 whose sixth digit from the left of the serial number is “1”, “2”, “3”. Examples of affected serial numbers are: “xxxxx1xxxxxx”, “xxxxx2xxxxxx”, “xxxxx3xxxxxx”.

Support
Canon USA will perform Factory Updates on the EOS-1D C free of charge. Shipping and handling charges may apply. Please contact the Canon Customer Support Center for details.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

If you have not already done so, please register your Canon EOS-1D C Cinema EOS Camera. By registering, we will be able to notify you via email about future announcements.

Contact Information for Inquiries
Canon Customer Support Center
Phone: 1-855-CINE-EOS (toll free), 1-855-246-3367
TDD: 1-866-251-3752
Email: CinemaEOS@cits.canon.com

From Canon:

Canon has released a firmware update for the Canon VIXIA mini Camcorder.

Details
Firmware Version 1.0.1.0 incorporates the following improvements:

• Remote viewing function has been added when using the CameraAccess plus smartphone app, with the optional CT-V1 Camera Pan Table.
  *note: The CameraAccess plus app is available free of charge from the Apple App Store and Google Play. Information on how to use the remote viewing function is available from the PIXELA Web site: http://www.pixela.co.jp/oem/canon/e/cameraaccess_plus/
• Shortens the time between turning the camcorder on and being able to start recording.
• In order to prevent inadvertently switching to playback mode while recording, the following improvements have been made:
• The playback button must be pressed for half a second or more in order to access the playback mode.
• The playback button has now been disabled while the camcorder is in recording mode, in order to prevent inadvertently switching modes.
• Quick access to the photo playback index screen, by holding down the playback button, has been added.
• Photo playback has been added to SP-V1 mode.
• In the Shooting Mode menu, the “Macro” option is now listed above “Auto” for improved ease of use.

Firmware Version 1.0.1.0 is for camcorders with firmware Version 1.0.0.0. If the camcorder's firmware is already Version 1.0.1.0, it is not necessary to update the firmware.

Once you have updated your camcorder’s firmware, it cannot be downgraded to a previous version.

Support
Download Firmware Version 1.0.1.0 for the Canon VIXIA mini.

Download the Instruction Manual and Getting Started guide for the Canon VIXIA mini.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

B&H carries the Canon Vixia mini camcorder.

From Canon:

Affected Product
EOS 6D Digital SLR Cameras

Details
Firmware Version 1.1.4 incorporates the following fixes:

1. Fixes a phenomenon in which some images cannot be transferred to mobile devices running the EOS Remote app.
2. Corrects an error in the German language Feature Guide.
3. Corrects an error in the Korean language Feature Guide.

Firmware Version 1.1.4 is for cameras with firmware up to Version 1.1.3. If the camera's firmware is already Version 1.1.4, it is not necessary to update the firmware.

Please note: After the firmware update has been performed the following setting will be reset to default.
Menu > Custom Function> C.Fn II: Autofocus > AF Microadjustment> 1: All by same amount

When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.

Support
Download Firmware Version 1.1.4 for the EOS 6D Camera

B&H carries the Canon EOS 6D.

Canon has made EOS Rebel T5i / 700D firmware version 1.1.3 available for download.

Firmware Version 1.1.3 incorporates the following fixes:

1. Fixes a phenomenon in which the camera displays Err01 or Err60, or in rare instances will lock-up when in Live View shooting mode (or Movie shooting mode) when attached to the following STM zoom lenses: EF-S 18-55mm f/3.5-5.6 IS STM, EF-S 18-135mm f/3.5-5.6 IS STM, EF-S 55-250mm f/4-5.6 IS STM.
2. Corrects some Korean language misspellings displayed on the menu screen.

Download the new firmware

From Canon USA:

Canon has released a firmware update for the EOS-1D X Digital SLR Camera.

Details

1. Auto focusing performance under low-light conditions has been enhanced when performing focusing before shooting in AI Servo AF mode. The enhancement comes from the improvement in tracking capability for the first image in the low-light conditions.
2. The number of release parameters settings for the “AI Servo AF 2nd image priority” AF function has been increased to enable improved AF tracking in low light or maintain consistent high frames rates during continuous shooting.
3. The number of parameters for acceleration/deceleration tracking in the AF Configuration Tool will has been increased.
4. Exposure compensation can be performed when using manual exposure and ISO Auto.
5. The minimum shutter speed limit for ISO Auto has been increased with shutter speeds up to 1/8000.
6. A new function to keep the exposure constant by altering the ISO or shutter speed in manual exposure, when the aperture value changes when zooming or changing lenses has been added.
7. A new option has been added to orientation linked AF point to enable only the AF point to switch as you change orientation rather than both AF point/ AF area settings
8. A new option to continue to use the previously manually selected AF point as the initial starting AF point when switching to 61-point automatic selection has been added.
9. New customization of the Exposure metering and AF controls has been added for more flexibility.
10. The number of possibilities for controls to switch between one-shot AF and AI Servo AF using custom controls has been increased.
11. A function has been added to allow the playback and review of protected images only.
12. A phenomenon has been fixed in which the white balance may be disturbed by the timing of the shutter release when the drive mode is single shooting and a flash (E-TTL)is used.

Firmware Version 2.0.3 is for cameras with firmware Version 1.2.4 or earlier. If the camera's firmware is already Version 2.0.3, it is not necessary to update the firmware. When updating the firmware of your camera, please first review the instructions thoroughly before you download the firmware.

Notes:

• Once the EOS-1D X camera is updated to Version 2.0.3, it cannot be restored to a previous firmware version (Version 1.0.2 through 1.2.4).
• It is recommended that the latest application software be used, once the EOS-1D X is updated to the new Firmware Version 2.0.3 from older firmware (Versions 1.0.2 through 1.2.4). Certain previous versions of these applications do not support functions which are added by the new firmware. You can download the latest application software from our Web site.
• Accompanying the enhancements to the functions, the instruction manual has also been revised. Users are asked to download both the latest firmware and the instruction manual. You can download the latest instruction manual from our Web site.

Download Firmware Version 2.0.3 for the EOS 1DX

B&H carries the Canon EOS-1D X DSLR Camera.

From Canon:

Canon has released a firmware update for the EOS C500/C500 PL Cinema EOS Cameras.

EOS C500 Cinema EOS Camera & EOS C500PL Cinema EOS Camera

1. When using the Magnify focus assist function, the ability to move the magnified viewing area around the LCD has been added.
2. Maximum ISO setting has been increased to ISO 80,000.
3. Cinema Gamut mode and DCI-P3+ mode have been added to provide expanded color gamut options in RAW capture.
4. 4096x1080-pixel RAW format resolution has been added.
5. A Key Lock menu setting has been added which now makes it possible to lock all operations, including the START/STOP button.
6. Using the optional Canon WFT-E6 Wireless File Transmitter, the camera’s remote-control application allows up to two users to access the same unit via a Wi-Fi link providing simultaneous and independent control of camera operation and metadata input.
7. Canon Log LUT support has been made possible for HD/SD SDI terminal output.
8. ACESproxy output from monitor terminal has been added.
9. [ND]/[ND-] have been added as functions that can be allocated to any assignable button.

EOS C500 Digital Cinema Camera only

1. Ability to assign the two control dials (body and grip) to operate either Iris or ISO sensitivity independently has been added.
2. Peripheral Illumination Correction Data has been added for seven (7) Canon Cinema lenses (EF mount) and eleven (11) Canon EF Lenses.

Cinema lenses (EF-mount) and Canon EF Lenses which benefit from the new firmware update:

The seven (7) supported Canon Cinema Lenses (EF-mount) are:

• CN-E15.5-47mm T2.8 L S
• CN-E30-105mm T2.8 L S
• CN-E14mm T3.1 L F
• CN-E24mm T1.5 L F
• CN-E50mm T1.3 L F
• CN-E85mm T1.3 L F
• CN-E135mm T2.2 L F

Please note this firmware version does not include the CN-E35mm T1.5 L F.

The eleven (11) supported Canon EF Lenses are:

• EF-S18-135mm f/3.5-5.6 IS STM
• EF500mm f/4L IS II USM
• EF600mm f/4L IS II USM
• EF28mm f/2.8 IS USM
• EF24mm f/2.8 IS USM
• EF40mm f/2.8 STM
• EF24-70mm f/4L IS USM
• EF35mm f/2 IS USM
• EF-S18-55mm f/3.5-5.6 IS STM
• EF24-70mm f/2.8L II USM
• EF200-400mm f/4L IS USM Extender 1.4x

Firmware Version 1.0.4.1.00 is for Cinema EOS C500 and EOS C500 PL cameras with Firmware Version 1.0.0.1.00 through 1.0.3.100. If your camera's firmware is already Version 1.0.4.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version.

Download:
Download Firmware Version 1.0.4.1.00 for EOS C500.
Download Firmware Version 1.0.4.1.00 for EOS C500 PL.

The Instruction Manual provides more information on the new features and benefits available in this firmware update.
Download the new version of the Instruction Manual for the EOS C500.
Download the new version of the Instruction Manual for the EOS C500 PL.

Adorama carries the Canon EOS C500 Cinema Camera.

From Canon USA:

Canon has released a firmware update for the EOS 7D digital SLR camera.

Firmware Version 2.0.5 incorporates the following fix:

1. Fixes a phenomenon in which the image files cannot be transferred using the FTP protocol via USB cable after the Canon EOS 7D camera has established a wireless connection to the Wireless File Transmitter WFT-E5A.

Firmware Version 2.0.5 is for cameras with firmware version 2.0.3. If the camera's firmware is already Version 2.0.5, it is not necessary to update the firmware. Once the camera is updated to version 2.0.5, it cannot be restored to a previous firmware version.

Download Firmware Version 2.0.5 for the EOS 7D.

NOTE:
When updating the firmware of your camera, please first review the instructions thoroughly before you download the firmware.

When the camera is updated to Firmware Version 2.0.5, the following settings will be automatically reset.
a) Date/Time setting
b) Lens peripheral illumination correction data registered to the camera

The Wireless File Transmitter WFT-E5A must be running Firmware Version 1.0.7 in order to be used with the EOS 7D camera running Firmware Version 2.0.5.

Some older versions of the applications listed below do not support functions that are added by the new firmware. In order to address compatibility issues, please download the latest versions of the applications (listed below) from our Web site. For the latest operating system requirement information please visit the Canon website.

EOS Utility Version 2.13.25 or later Supported OSes:
Windows (XP SP3/Vista SP2/7/7 SP1/8), Mac OS X (v10.6.8/10.7/10.8)

Digital Photo Professional Version 3.13.45 or later
Supported OSes: Windows (XP SP3/Vista SP2/7/7 SP1/8), Mac OS X (v10.6/10.7/10.8)

ImageBrowser EX Version 1.0.1 or later
Supported OSes: Windows (XP SP3/Vista SP2/7/7 SP1/8/8.1), Mac OS X (v10.6.8/10.7/10.8)

Please download the most recent Instruction Manual if the firmware of your camera is being updated from firmware version 1.25 or earlier. The Instruction Manual has been revised accompanying the improvements and additions of functions provided in these previous firmware versions.

Adorama carries the Canon EOS 7D DSLR Camera ($1,257.95 checkout price w/ Free Shipping & 4% Rewards).

From Canon:

Thank you for using Canon products.

Please note that we suspended download services for Firmware Version 1.1.0.1.00 that was posted Tuesday November 12, 2013 due to a discrepancy in color balance. We would like to apologize for the inconvenience. Firmware Version 1.1.1.1.00 corrects this color balance discrepancy. Any cameras that are running firmware version 1.1.0.1.00 should be updated to firmware version 1.1.1.1.00.

Firmware Version 1.1.1.1.00 incorporates all the functions and modifications listed below:

EOS C300 Cinema EOS Camera & EOS C300 PL Cinema EOS Camera

1. Fixes a phenomenon where the previous firmware version 1.1.0.1.00 offered incorrect color balance.
2. Ability to move the magnification viewing area around the LCD using the MAGN Function has been added.
3. Support for a 1440×1080/35Mbps recording mode has been added.
4. ISO up to 80,000 has been added.
5. Functionality to support the optional Canon GPS Receiver GP-E1 has been added.
6. A Key Lock menu setting has been added which now makes it possible to lock all operations, including the START/STOP button.
7. Using the optional Canon WFT-E6 Wireless File Transmitter, the camera’s remote-control application allows two users to access the same unit via a Wi-Fi link providing simultaneous camera operation and control and metadata input.
8. [Lens Exchange] and [ND+]/[ND-] have been added as functions that can be allocated to any assignable button.
9. A new Wide DR Gamma setting provides an expanded dynamic range of 800%.
10. Flicker Reduction has been improved.

EOS C300 Cinema EOS Camera only

1. Provides Push Auto Iris and One-Shot AF operation.
2. A new AE Shift function and the selection of various light-metering modes are now available when used with some Canon Cinema lenses (EF mount) and Canon EF Lenses.
3. Ability to assign the two control dials to operate either Iris or ISO sensitivity independently has been added.
4. Peripheral Illumination Correction Data has been added for seven (7) Canon Cinema lenses (EF mount) and fifteen (15) Canon EF Lenses.
5. A function has been added to enable continuous focus and iris setting on a subject in the middle of the screen when one of the two EF STM lenses** is attached.

**[EF-S18-135mm f/3.5-5.6 IS STM], [EF-S18-55mm f/3.5-5.6 IS STM].

*Note: Gamma information will not be shown correctly in the metadata of clips filmed on the Wide DR Gamma setting included in Firmware Version 1.1.0.1.00 and above when using the bundled software application Canon XF Utility Ver.1.3.1 or earlier. Therefore, we recommend our customers install Canon XF Utility Ver.1.3.2. The installer for this application has already been released.

Please download the Canon XF Utility 1.3.2 for Windows or Mac OS X from the EOS C300 page.
Please download the Canon XF Utility 1.3.2 for Windows or Mac OS X from the EOS C300 PL page.

Adorama carries the Canon EOS C300 Cinema Camera.

From Canon:

To Users of the Canon EOS C300 and C300PL Cinema EOS Cameras.
Thank you for using Canon products.

Details
We have suspended download services for Firmware Version 1.1.0.1.00 that was posted Tuesday November 12, 2013 at 8PM EST, because it has been determined that discrepancies in color balance can occur with footage captured by the EOS C300 and EOS C300PL running Firmware Version 1.1.0.1.00.

We are currently preparing new firmware with a fix for this issue and will release it as soon as it is available.

We are very sorry for the inconvenience, but we ask for your patience during this time.

Support
We are preparing new firmware with a fix for this issue. If you have updated your EOS C300 or EOS C300PL firmware to version 1.1.0.1.00, Canon will restore the camera’s firmware version to 1.0.9.1.00 for any EOS C300 or EOS C300PL camera running firmware version 1.1.0.1.00. Please contact the Canon Customer Support Center in your region for further details. Contact information is provided below.

Canon will restore the camera’s firmware version to 1.0.9.1.00 for any EOS C300 or EOS C300PL camera running firmware version 1.1.0.1.00. Please contact the Canon Customer Support Center in your region.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

If you have not already done so, please register your Canon EOS C300 or your EOS C300PL Cinema EOS camera. By registering, we will be able to notify you via email about future service upgrades.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Contact Information for Inquiries
Canon Customer Support Center
Phone: 1-855-CINE-EOS (toll free), 1-855-246-3367
TDD: 1-866-251-3752
Email: CinemaEOS@cits.canon.com

From Canon:

Firmware Version 1.3.4 incorporates the following improvements.

1. Peripheral Illumination and Lens Aberration Correction data has been added for Canon EF-mount Cinema lenses.
   *1) EOS Utility Version 2.13.25 (or later) is required to upload the correction data to the camera. The latest update for this software can be downloaded from our web site.
   *2) Does not apply to Canon EF Cinema zoom lenses CN-E 14.5-60mm T2.6 L S and CN-E 30-300mm T2.95-3.7 L S.
2. A line-level audio input accepting a mini 3.5mm connector has been added.

Cinema lenses which benefit from the new firmware udpate:

• CN-E15.5-47mm T2.8 L S
• CN-E30-105mm T2.8 L S
• CN-E14mm T3.1 L F
• CN-E24mm T1.5 L F
• CN-E50mm T1.3 L F
• CN-E85mm T1.3 L F
• CN-E135mm T2.2 L F
• CN-E50mm T1.3 L F
• CN-E85mm T1.3 L F
• CN-E135mm T2.2 L F

Support
Canon USA will perform Factory Updates on the EOS-1D C free of charge. Shipping and handling charges may apply. Please contact the Canon Customer Support Center for details.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

If you have not already done so, please register your Canon EOS-1D C Cinema EOS Camera. By registering, we will be able to notify you via email about future announcements.

Contact Information for Inquiries
Canon Customer Support Center
Phone: 1-855-CINE-EOS (toll free), 1-855-246-3367
TDD: 1-866-251-3752
Email: CinemaEOS@cits.canon.com

Adorama carries the Canon EOS-1D C Cinema Camera.

From Canon:

Canon EOS C100 Firmware Version 1.0.2.1.00

Firmware Version 1.0.2.1.00 incorporates the following additional functions and modifications:

1. Ability to move the magnification viewing area around the LCD using the MAGN Function.
2. ISO up to 80,000 has been added.
3. A Key Lock menu setting has been added which now makes it possible to lock all operations, including the START/STOP button.
4. Peripheral Illumination Correction Data has been added for seven (7) Canon Cinema lenses (EF mount) and eleven (11) Canon EF Lenses.
5. Internal camera menus are now controllable from buttons on the camera body. Previously, they were only controllable from the joystick grip unit.
6. In addition to the [EF-S18-135mm f/3.5-5.6 IS STM], the function to enable continuous focusing and correct aperture on a subject in the middle of the screen when one of the two EF STM lenses is attached, has been extended to include the [EF-S18-55mm f/3.5-5.6 IS STM] lens.

Firmware Version 1.0.2.1.00 is for Cinema EOS C100 cameras with Firmware Version 1.0.1.1.00. If your camera's firmware is already version 1.0.2.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version.

Download the new version of the User Manual for the EOS C100 Cinema EOS Camera which provides more information on the new features and benefits available in this firmware update.

Download
Canon EOS C100 Firmware Version 1.0.2.1.00

Canon EOS C300 Firmware Version 1.1.0.1.00

Firmware Version 1.1.0.1.00 incorporates the following additional functions and modifications:

EOS C300 Cinema EOS Camera & EOS C300 PL Cinema EOS Camera

1. Ability to move the magnification viewing area around the LCD using the MAGN Function.
2. Support for a 1440x1080/35Mbps recording mode.
3. ISO up to 80,000 has been added.
4. Added functionality to support the optional Canon GPS Receiver GP-E1.
5. A Key Lock menu setting has been added which now makes it possible to lock all operations, including the START/STOP button.
6. Using the optional Canon WFT-E6 Wireless File Transmitter, the camera's remote-control application allows two users to access the same unit via a Wi-Fi link providing simultaneous camera operation and control and metadata input simultaneously.
7. [Lens Exchange] and [ND+/ND-] have been added as functions that can be allocated to any assignable button.
8. A new Wide DR gamma setting provides an expanded dynamic range of 800%.
9. Flicker Reduction has been improved.

EOS C300 Cinema EOS Camera only

1. Provides Push Auto Iris and One-Shot AF operation.
2. A new AE Shift function and the selection of various light-metering modes are now available when used with some Canon Cinema lenses (EF mount) and Canon EF Lenses.
3. Ability to assign the two control dials to operate either Iris or ISO sensitivity independently.
4. Peripheral Illumination Correction Data has been added for seven (7) Canon Cinema lenses (EF mount) and fifteen (15) Canon EF Lenses.
5. A function has been added to enable continuous focus and iris setting on a subject in the middle of the screen when one of the two EF STM lenses** is attached.
   **[EF-S18-135mm f/3.5-5.6 IS STM], [EF-S18-55mm f/3.5-5.6 IS STM].

Gamma information will not be shown correctly in the metadata of clips filmed on the Wide DR gamma setting included in Firmware Version 1.1.0.1.00 and above when using the bundled software application Canon XF Utility Ver.1.3.1 or earlier. Therefore, we recommend our customers install Canon XF Utility Ver.1.3.2. The installer for this application has already been released.

Canon XF Utility 1.3.2 for Windows

If your camera's firmware is already Version 1.1.0.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest firmware version, it cannot be restored to a previous version.

For further details, please refer to the latest version of the instruction manual for this product, which will be released at the same time as this firmware update.

Download the new version of the Instruction Manual for EOS C300, EOS C300 PL Cinema EOS Camera which provides more information on the new features and benefits available in this firmware update.

Download:
Canon EOS C300 Firmware Version 1.1.0.1.00

Adorama carries the Canon EOS C100 and C300 cinema cameras.

From Canon:

Firmware Version 1.2.3 incorporates the following improvements and fixes.

1. Fixes a phenomenon in which the flash may not fire depending on the timing of when the shutter button is pressed.
2. Fixes a phenomenon in which the AF microadjustment value may change.*
3. Fixes a phenomenon in which the LCD monitor may show a line of false color along boundaries of high contrast.
4. Fixes a phenomenon in which the histogram of a LiveView image is incorrectly displayed when an HDMI cable is connected.
5. Enables the brightness of the camera’s LCD monitor to be adjusted even when an HDMI cable is connected.

* The phenomenon listed in 2 was addressed with Firmware Version 1.2.1, and has been further improved with Firmware Version 1.2.3.

Firmware Version 1.2.3 is for cameras with firmware up to Version 1.2.1. If the camera's firmware is already Version 1.2.3, it is not necessary to update the firmware.

When updating the firmware of your camera, please first review the instructions thoroughly before you download the firmware.

Download:
Canon EOS 5D Mark III Firmware Version 1.2.3

Adorama carries the Canon EOS 5D Mark III.