Camera Setup Instructions (Page 2)

With a Canon EOS M200 in hand, it is time to set up the camera for use. Following are the 29 steps I took to make an out-of-the-box M200 ready for use.

1. Open the box, find the battery, place it in the charger and plug it in.
2. While the battery is charging, unpack the other items you want from the box. This is a good time to install the neck strap.
3. Download and install the Canon Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, Photostitch and Lens Registration Utility are the options I manually include in the install.
4. Insert the battery (after charging completes) and power the camera on.
5. The date, time and time zone setup screen will show at the first startup. Use the Rear Control dial and Set button to update this information.
6. Insert a memory card (don't forget to format the card via the tools menu option before taking pictures).
7. If the lens being used retracts beyond a usable focal length (the EF-M 15-45 for example), unlock and extend the lens.
8. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options). Use the middle switch setting (Creative Assist by default) and scroll up to the advanced modes.
9. Scroll through all of the menu tabs to configure the camera as follows:
10. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Rear Control arrow (press left or right) to set JPEG to "-"
11. Shooting Menu, Tab 1: Image review: Off (without a review display being shown and cleared, the viewfinder becomes ready-for-shooting faster)
12. Shooting Menu, Tab 1: Lens aberration correction: disable all (I correct lens aberrations during post processing if warranted, though enabling CA correction is usually a good idea and if shooting in JPG mode, consider enabling other options as well.)
13. Shooting Menu, Tab 2: Auto Lighting Optimizer: Off (again, those shooting in JPG mode might want to explore the results of this option)
14. Shooting Menu, Tab 4: Picture Style: Neutral with Sharpness = 1 (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture. If shooting in JPG mode, selecting "Standard" is probably a better option.)
15. Shooting Menu, Tab 5: High speed NR: Off (or Low) (Noise reduction is destructive to images details - I prefer to add NR sparingly in post. Select "Low" if shooting in JPG format).
16. Shooting Menu, Tab 5: Touch Shutter: Disable
17. Shooting Menu, Tab 6: Continuous AF: Disable (increases battery life)
18. Playback Menu, Tab 4: AF point disp.: Disable
19. Playback Menu, Tab 4: View from last seen: Disable
20. Wireless Menu, Tab 1: Airplane mode: On (unless using the wireless features)
21. Set Up Menu, Tab 1: Auto rotate: On, computer only (if I'm shooting vertically, I want the image to also display vertically on the camera, optimally using the full screen)
22. Set Up Menu, Tab 3: Beep: Disable (no one else wants to hear your camera)
23. Set Up Menu, Tab 4: Shooting information display: Grid display: 3x3, Histogram: RGB
24. Set Up Menu, Tab 5: Custom Functions(C.Fn): ISO expansion: On
25. Set Up Menu, Tab 5: Custom Functions(C.Fn): Shutter release w/o lens (Disable)
26. Set Up Menu, Tab 5: Copyright information: Enter author's name
27. Display Level Menu, Tab 1: Menu display: Standard
28. Display Level Menu, Tab 1: Feature guide: Disable (beginners will want this feature enabled)
29. My Menu: Set up

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera is reset-to-factory state for some reason, such as when being serviced, you will be ready to restore your setup quickly while ensuring that you do not miss an important setting. If you purchase another same or similar camera, you will be able to quickly set it up.

More Information

Canon EOS M200

The Canon EOS M200 is in stock at B&H.

As with any new camera, the first task with a new Sony a7R IV in hand is to set it up for use. Following are the 39 steps I took to make an out-of-the-box Sony a7R IV ready for use (including tweaks made after roughly 15,000 frames of use).

• Charge battery
• Install neck strap (if opting to use one)
• If your current image processing software does not support the Sony a7R IV, download and install Capture One (for Sony) and/or Sony Imaging Edge
• Insert charged battery and power on the camera
• Set the time zone, date, time, timeformat (note that the AM/PM setting is not directly able to be changed – the hour setting must be scrolled 12 hours to change this)
• insert memory card (don't forget to format it)
• Scroll through all of the menu tabs to configure the camera as follows:
• Camera Menu 1, Tab 1: Quality: RAW
• Camera Menu 1, Tab 1: RAW File Type: Uncompressed (unless taking advantage of the about-50% smaller RAW file size)
• Camera Menu 1, Tab 2: Long Exposure NR: Off
• Camera Menu 1, Tab 2: Lens Comp.: All Off
• Camera Menu 1, Tab 3: Bracket Settings: Self-timer during Bracket: 2 Sec
• Camera Menu 1, Tab 3: Bracket Settings: Bracket Order: ->0>+ (makes selecting images for HDR processing easier)
• Camera Menu 1, Tab 3: Memory: I set the 3 Custom dial modes to my standard landscape, sports, and wildlife settings later
• Camera Menu 1, Tab 5: Priority Set in AF-S: AF
• Camera Menu 1, Tab 5: Priority Set in AF-C: AF
• Camera Menu 1, Tab 5: Focus Area: Flexible Spot: S
• Camera Menu 1, Tab 5: Swt. V/H AF Area: AF Point Only
• Camera Menu 1, Tab 6: Face/Eye AF Set.: Face/Eye Frame Display: On
• Camera Menu 1, Tab 6: Aperture Drive in AF: Focus Priority
• Camera Menu 1, Tab 9: Reset EV Comp.: Maintain
• Camera Menu 1, Tab 10: Spot Metering Point: Focus Point Link
• Camera Menu 1, Tab 12: DRO/Auto HDR: Off
• Camera Menu 1, Tab 12: Creative Style: Neutral, Sharpness = 1 (I usually process with the Natural creative style in Capture One)
• Camera Menu 2, Tab 4: Release w/o Lens: Disable
• Camera Menu 2, Tab 4: Release w/o Card: Disable
• Camera Menu 2, Tab 7: Grid Line: Rule of 3rds Grid
• Camera Menu 2, Tab 9: Dial Setup: TV/Av (I adjust Tv while shooting more frequently than I adjust Av and the front dial is easier to access quickly)
• Camera Menu 2, Tab 11: Audio signals: Off (How to turn off the loud and usually-annoying AF beep sound)
• Network Menu 1, Tab 2: Airplane Mode: On
• Setup Menu, Tab 1: Delete confirm: "Delete" first
• Setup Menu, Tab 2: Touch Operation: On
• Setup Menu, Tab 3: Touch Panel/Pad: Touch Panel+Pad
• Setup Menu, Tab 3: Touch Panel/Pad Settings: Touch Pos. Mode: Relative Position; Operation Area: Right Half of Screen
• Setup Menu, Tab 5: Write Serial Number: On
• Setup Menu, Tab 5: Copyright Info: Write Copyright Info: On, Set Photographer: {name}, Set Copyright: {name}
• My Menu: Px. Shift Multi Shoot.; Anti-flicker Shoot; Format; Silent Shooting; Steady Shot; Format; Face/Eye AF Set
• Mount a lens, focus on something with detail, and adjust the viewfinder diopter to your vision
• Check for sensor dust (this was an issue with the two a7R IV cameras I received).

I of course make additional menu and other setting changes based on current shooting scenarios, but this list covers my initial camera setup process.

To copy this configuration would mean that you intend to shoot similar to how I shoot – including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera is reset-to-factory state for some reason, such as when being serviced, you will be ready to restore your setup quickly while ensuring that you do not miss an important setting. If you purchase another same or similar camera, you will be able to quickly set it up.

More Information

Sony a7R IV

The Sony a7R IV is in stock at B&H | Adorama | Amazon | WEX.

Rent the Sony a7R IV from Lensrentals.

With a Canon EOS M6 Mark II in hand, it was time to set up the camera for use. Following are the 36 steps I took to make an out-of-the-box M6 II ready for use.

1. Open the box, find the battery and charger and plug it in. If you have another charged battery available, you can continue to the battery-required steps without a wait. Or, the supplied battery may have enough charge to take you through these steps if you can't wait.
2. While the battery is charging, unpack the other items you want from the box. For me, this is primarily the camera, the eye cup, and the neck strap
3. Install the latest Canon EOS Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, and Lens Registration Utility are the options I manually include in the install.
4. Attach the neck strap.
5. Insert a sufficiently charged battery.
6. Power the camera on.
7. The date and time setup screen will show at startup the first time. Use the Rear Control dial and the Set button to update this information.
8. Insert a memory card (format them via the tools menu option before taking pictures).
9. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
10. Scroll through all of the menu tabs to configure the camera as follows:
11. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Rear Control dial to set JPEG to "-"
12. Shooting Menu, Tab 1: Image review: Off
13. Shooting Menu, Tab 2: ISO Speed Settings: ISO Speed range: 100-H (51200), Auto ISO Speed range: 100-25600
14. Shooting Menu, Tab 1: Lens aberration correction: All disabled (though I suggest leaving CA correction enabled for most uses - all can be applied to a RAW file in DPP)
15. Shooting Menu, Tab 4: White balance: AWB-W (Auto: White priority)
16. Shooting Menu, Tab 4: Picture Style: Neutral with Sharpness Strength set to "1" (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
17. Shooting Menu, Tab 3: High ISO speed noise reduction: Low or Off (noise reduction is destructive to image details - I prefer to add NR sparingly in post)
18. Shooting Menu, Tab 7: Eye Detection AF: Enable
19. Shooting Menu, Tab 7: Touch & drag AF settings: Touch and drag AF: Enable
20. Playback Menu, Tab 4: Playback information display: Leave options 1 and 2 (only) checked and press info to change option 2's histogram to RGB
21. Playback Menu, Tab 4: Highlight alert: Enable (flash portions of images that are overexposed)
22. Playback Menu, Tab 4: Playback grid: 3x3
23. Playback Menu, Tab 4: Magnificatn (apx): Actual size
24. Setup Menu, Tab 1: Auto rotate: On/Computer only (this provides the largest playback image size on the camera LCD)
25. Setup Menu, Tab 1: Mode guide: Disable
26. Setup Menu, Tab 1: Feature guide: Disable
27. Setup Menu, Tab 3: Beep: Disable
28. Tools Menu, Tab 4: Shooting info. display: Screen info. settings: Enable 1, 3, 4
29. Tools Menu, Tab 4: Shooting info. display: VF info/toggle setting: Enable 1 and 3
30. Tools Menu, Tab 4: Shooting info. display: Grid display: 3x3 (sometimes helpful for alignment checking)
31. Tools Menu, Tab 4: Shooting info. display: Histogram disp: RGB, Small (I want to see the brightness levels of each channel separately and don't want the graph to take up much space in the display)
32. Setup Menu, Tab 5: Custom shooting mode (C1-C3): Auto update set: Enable (see also: Configuring Custom Shooting Modes)
33. Setup Menu, Tab 5: Copyright information: Type name as desired
34. Custom Functions, Tab 1: C.Fn II :Autofocus: Orientation linked AF point: Separate AF pts: Pt only
35. My Menu: Add the first tab; Register the following options for Tab 1: Format card, Date/Time/Zone (great for monitoring what time it is), Sensor cleaning, Expo.comp./AEB
36. Mount a lens, focus on a subject and adjust the viewfinder diopter (if necessary)

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. IF your camera is reset-to-factory state for some reason, such as when being serviced, you will be ready to restore your setup quickly while ensuring that you do not miss an important setting. If you purchase another same or similar camera, you will be able to quickly set it up.

More Information

Canon EOS M6 Mark II

Order the Canon EOS M6 Mark II at B&H | Amazon | Adorama | WEX.

With a Canon EOS 90D in hand, it was time to set up the camera for use. Following are the 36 steps I took to make an out-of-the-box 90D ready for use.

1. Open the box, find the battery and charger and plug it in. If you have another charged LP-E6/LP-E6N battery available, you can continue to the battery-required steps without a wait. Or, the supplied battery may have enough charge to take you through these steps if you can't wait.
2. While the battery is charging, unpack the other items you want from the box. For me, this is primarily the camera, the eye cup, and the neck strap
3. Install the latest Canon EOS Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, and Lens Registration Utility are the options I manually include in the install.
4. Attach the neck strap.
5. Insert a sufficiently charged battery.
6. Power the camera on.
7. The date and time setup screen will show at startup the first time. Use the Rear Control dial and the Set button to update this information.
8. Insert a memory card (format them via the tools menu option before taking pictures).
9. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
10. Scroll through all of the menu tabs to configure the camera as follows:
11. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Rear Control dial to set JPEG to "-"
12. Shooting Menu, Tab 1: Image review: 4 sec.
13. Shooting Menu, Tab 1: Release without card: Disable/off (I highly recommend this setting)
14. Shooting Menu, Tab 1: Lens aberration correction: All disabled (though I suggest leaving CA correction enabled for most uses - all can be applied to a RAW file in DPP)
15. Shooting Menu, Tab 2: ISO Speed Settings: ISO Speed range: 100-H (51200), Auto ISO Speed range: 100-25600
16. Shooting Menu, Tab 3: White balance: AWB-W (Auto: White priority)
17. Shooting Menu, Tab 3: Picture Style: Neutral with Sharpness Strength set to "1" (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
18. Shooting Menu, Tab 4: High ISO speed noise reduction: Low or Off (noise reduction is destructive to image details - I prefer to add NR sparingly in post)
19. Playback Menu, Tab 4: Playback information display: Leave options 1 and 2 (only) checked and press info to change option 2's histogram to RGB
20. Playback Menu, Tab 4: Highlight alert: Enable (flash portions of images that are overexposed)
21. Playback Menu, Tab 4: Playback grid: 3x3
22. Setup Menu, Tab 1: Auto rotate: On/Computer only (this provides the largest playback image size on the camera LCD)
23. Setup Menu, Tab 3: Beep: Disable
24. Setup Menu, Tab 4: Mode guide: Disable
25. Setup Menu, Tab 4: Feature guide: Disable
26. Setup Menu, Tab 4: Viewfinder display: Select all options
27. Setup Menu, Tab 5: Custom shooting mode (C1-C3): Auto update set: Enable (see also: Configuring Custom Shooting Modes)
28. Setup Menu, Tab 5: Copyright information: Type name as desired
29. Custom Functions, Tab 1: C.Fn I :Exposure: Bracketing auto cancel: Disable
30. Custom Functions, Tab 1: C.Fn I :Exposure: Bracketing sequence: -, 0, +
31. Custom Functions, Tab 1: C.Fn II :Autofocus: AI Servo 1st image priority: Focus priority (I want the images in focus more than I want the time-priority capture)
32. Custom Functions, Tab 1: C.Fn II :Autofocus: Focus priority (same reason)
33. Custom Functions, Tab 1: C.Fn II :Autofocus: Orientation linked AF point: Separate AF pts: Area + pt
34. Custom Functions, Tab 1: C.Fn III : Operation/others: Custom controls: AF-ON: One shot AI Servo; Set: Playback; Multicontroller: Direct AF point selection
35. My Menu: Add the first tab; Register the following options for Tab 1: Mirror lockup, Format card, Date/Time/Zone (great for monitoring what time it is), Sensor cleaning, Expo.comp./AEB
36. Mount a lens, focus on a subject and adjust the viewfinder diopter (if necessary)

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. IF your camera is reset-to-factory state for some reason, such as when being serviced, you will be ready to restore your setup quickly while ensuring that you do not miss an important setting. If you purchase another same or similar camera, you will be able to quickly set it up.

More Information

Canon EOS 90D

Order the Canon EOS 90D at B&H | Amazon | Adorama | WEX.

With a Canon EOS Rebel SL3 (EOS 250D, EOS Kiss 10, EOS 200D II) in hand, it is time to set up the camera for use. Following are the 32 steps I took to make an out-of-the-box Canon EOS Rebel SL3 ready for use.

1. Open the box, find the battery, place it in the charger and plug it in.
2. While the battery is charging, unpack the other items you want from the box.
3. Download and install the Canon Solution Disk software on your computer, gaining support for the latest camera(s). Canon Digital Photo Pro (DPP) and EOS Utility are the options I manually include in the install.
4. Attach the neck strap.
5. Insert the battery (after charging completes) and power the camera on.
6. Insert a memory card.
7. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
8. Scroll through all of the menu tabs to configure the camera as follows:
9. Shooting settings, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Cross Keys to set JPEG to "-" (RAW image files provide the highest quality and are especially valuable for post processing work)
10. Shooting settings, Tab 1: Image review: 4 sec. (or sometimes off to increase shooting speed in the field)
11. Shooting settings, Tab 1: Release shutter without card: Disable (only in a retail store do you want to press the shutter release without saving the image file, leaving this option enabled will burn you someday)
12. Shooting settings, Tab 1: Lens Aberration Correction: All options "OFF" (though Chromatic Aberration correction is a good option to leave enabled for most)
13. Shooting settings, Tab 4: White balance: AWB W (White) (I seldom use another white balance setting while shooting, though I often adjust modestly during post processing)
14. Shooting settings, Tab 4: Picture Style: Neutral with Strength = 1 (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
15. Shooting settings, Tab 5: Long exp. noise reduction: Auto (when active, LENR captures a dark image that is used to correct the long exposure noise in the primary image)
16. Shooting settings, Tab 5: High ISO speed NR: Off (or Low) (noise reduction is destructive to images details - I prefer to add noise reduction sparingly during post processing)
17. Playback settings, Tab 1: Histogram disp: RGB (I want to see the graph for individual color channels)
18. Function settings, Tab 1: Format card (always format memory cards in-camera — after all contained images are stored elsewhere of course)
19. Function settings, Tab 1: Auto Rotate: On computer (only) (images are properly rotated when viewed on a computer, but are always oriented to fill the LCD when viewed on the camera)
20. Function settings, Tab 2: Date/Time/Zone: make correct for your location
21. Function settings, Tab 3: Beep: Disable (no one wants to hear your camera constantly beeping)
22. Function settings, Tab 5: Copyright information: enter as desired
23. Function settings, Tab 5: Custom Functions settings(C.Fn): C.Fn I: Exposure: 2: ISO expansion: On (required for setting ISO to 51200)
24. Shooting settings, Tab 3: Photo ISO speed settings: ISO 51200 (this upper limit is only being used for testing, set to your tolerance)
25. Function settings, Tab 5: Custom Functions settings(C.Fn): C.Fn I: Exposure: 4: Exposure comp. auto cancel: Disable (I'll decide when exposure compensation should be canceled)
26. Function settings, Tab 5: Custom Functions settings(C.Fn): C.Fn I: Operation/Others: 11: Retract lens on power off (avoids having a carefully-selected focus distance reset when camera auto powers off)
27. Display level settings, Tab 1: Shooting screen: Standard (Guided is useful for beginners)
28. Display level settings, Tab 1: Menu displaye: Standard (Guided is useful for beginners)
29. Display level settings, Tab 1: Mode guide: Disable (Enabled is useful for beginners)
30. Display level settings, Tab 1: Feature guide: Disable (Enabled is useful for beginners)
31. My Menu: Add the first tab; Register the following options for Tab 1: Format card, Mirror lockup, Date/Time/Zone (great for monitoring what time it is), Expo.comp./AEB, Long exp. noise reduction, Sensor cleaning (nothing in my My Menu is found on the Quick Control display as those functions are already quickly accessed)
32. With a lens mounted and a subject focused on, adjust the viewfinder diopter until the scene is sharp

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera is reset-to-factory state for some reason, such as when being serviced, you will be ready to restore your setup quickly while ensuring that you do not miss an important setting. If you purchase another same or similar camera, you will be able to quickly set it up.

More Information

Canon EOS Rebel SL3

The Canon EOS Rebel SL3 is in stock at B&H | Amazon | Adorama | WEX.

Upon being handed a Canon EOS RP to evaluate, I immediately set up the camera for use. Following are the 42 steps I took to make an out-of-the-box EOS RP ready for use.

1. Open the box, find the battery, place it in the charger and plug it in.
2. While the battery is charging, unpack the other items you want from the box.
3. Download and install the Canon Solution Disk software on your computer, gaining support for the latest camera(s). Canon Digital Photo Pro (DPP) and EOS Utility are the options I manually include in the install.
4. Attach the neck strap.
5. Insert the battery (after charging completes) and power the camera on.
6. The date, time and time zone setup screen will show at the first startup. Use the rear cross keys and set button to update this information.
7. Insert a memory card (don't forget to format the card via the tools menu option before taking pictures).
8. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
9. Scroll through all of the menu tabs to configure the camera as follows:
10. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Cross Keys to set JPEG to "-" (RAW image files provide the highest quality and are especially valuable for post processing work)
11. Shooting Menu, Tab 1: Image review: 4 sec. (or sometimes off to increase shooting speed in the field)
12. Shooting Menu, Tab 1: Release shutter without card: Disable (only in a retail store do you want to press the shutter release without saving the image file)
13. Shooting Menu, Tab 2: Lens Aberration Correction: All options "OFF" (though Chromatic Aberration correction is a good option to leave enabled for most)
14. Shooting Menu, Tab 3: Photo ISO speed settings: ISO speed range: L(50) – H2(102400) (settings used for testing, adjust to your tolerance)
15. Shooting Menu, Tab 4: White balance: AWB W (White) (I seldom use another white balance setting while shooting, though I often adjust modestly during post processing)
16. Shooting Menu, Tab 4: Picture Style: Neutral with Strength = 1 (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
17. Shooting Menu, Tab 5: Long exp. noise reduction: Auto (when active, LENR captures a dark image that is used to correct the long exposure noise in the primary image)
18. Shooting Menu, Tab 5: High ISO speed NR: Off (or Low) (noise reduction is destructive to images details – I prefer to add noise reduction sparingly during post processing)
19. Shooting Menu, Tab 6: High speed display: ON (note that the camera must be set to Servo AF and high speed continuous frame rate to enable this option)
20. Shooting Menu, Tab 7: Touch & drag AF settings: Touch & drag AF: Enable (allows a thumb drag across the rear LCD to quickly move the AF point while looking through the electronic viewfinder)
21. Playback Menu, Tab 4: Playback information display: 1 and 3 enabled (avoids too many playback information options)
22. Playback Menu, Tab 4: Highlight Alert: Enable (causes overexposed pixels to blink)
23. Playback Menu, Tab 4: Playback grid: 3x3 (sometimes helps with checking alignment)
24. Playback Menu, Tab 4: Magnificatn (apx): Actual size (from selected pt) (allows one button press during playback to zoom deeply into the image)
25. Tools Menu, Tab 1: Auto Rotate: On computer (only) (images are properly rotated when viewed on a computer, but are always oriented to fill the LCD when viewed on the camera)
26. Tools Menu, Tab 1: Mode guide: Disable (useful for beginners)
27. Tools Menu, Tab 1: Feature guide: Disable (useful for beginners)
28. Tools Menu, Tab 3: Beep: Disable (probably no one wants to hear you beeping camera setting changes or focus confirmation)
29. Tools Menu, Tab 4: Shooting info. display: Screen info. settings: Enable 1 (press Info, disable basic shooting info and enable Electronic level), 3 and 4
30. Tools Menu, Tab 4: Shooting info. display: VF info/toggle setting: Enable 1, (press Info, disable Detailed shooting info and Histogram disp, enable Electronic level) and 3 (press Info, disable Detailed shooting info, enable Histogram disp and Electronic level)
31. Tools Menu, Tab 4: Shooting info. display: Grid display: 3x3 (sometimes helpful for alignment checking)
32. Tools Menu, Tab 4: Shooting info. display: Histogram disp: Brightness/RGB: RGB, Display size: Small (I want to see the brightness levels of each channel separately and don't want the graph to take up much space in the display)
33. Tools Menu, Tab 6: Custom shooting mode (C1 - C3): Auto update set: Enable (see Configuring Custom Shooting Modes)
34. Tools Menu, Tab 6: Copyright information: enter as desired
35. Custom Functions Menu, C.Fn I: Exposure: 3: Bracketing auto cancel: OFF (I want to control when AEB (Auto Exposure Bracketing) is enabled and disabled)
36. Custom Functions Menu, C.Fn I: Exposure: 4: Bracketing sequence: -0+ (if images are captured in brightness sequence, they are easier to work with during post processing. Capturing the darkest image first means that I quickly get at least the first frame)
37. Custom Functions Menu, C.Fn II: Autofocus: 6: Orientation linked AF point: 1:Separate AF pts: Pt only (instructs camera to individually save the selected AF points for vertical and horizontal orientation)
38. Custom Functions Menu, C.Fn III: Operation/Others: 4: RF lens MF focus ring sensitivity: Linked to rotation degree (I do not like most variable speed AF rings)
39. Custom Functions Menu, C.Fn III: Operation/Others: Customize buttons: Up, Down, Left and Right buttons: Direct AF point selection
40. Custom Functions Menu, C.Fn III: Retract lens on power off: OFF (avoids having a carefully-selected focus distance resetting when camera auto powers off)
41. My Menu: Add the first tab; Register the following options for Tab 1: Format card, Image review (disable when speed is needed), Expo. simulation, Long exposure noise reduction, Date/Time/Zone (great for monitoring what time it is), Expo.comp./AEB (found back up near the top of the list) (nothing in my My Menu is found on the Quick Control display as those functions are already quickly accessed)
42. With a lens mounted and a subject focused on, adjust the viewfinder diopter until the scene is sharp

To copy this configuration would mean that you intend to shoot similar to how I shoot – including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera is reset-to-factory state for some reason, such as when being serviced, you will be ready to restore your setup quickly while ensuring that you do not miss an important setting. If you purchase another same or similar camera, you will be able to quickly set it up.

More Information

Canon EOS RP

Get the Canon EOS RP at B&H | Amazon | Adorama | WEX

I have a Nikon D850 in my hands and it is time to set up the camera for use. Following are the 31 steps I took to make an out-of-the-box Nikon D850 ready for use.

1. Charge battery
2. Install neck strap
3. Mount a lens
4. Insert charged battery and power on the camera
5. While looking at an in-focus subject through the viewfinder, adjust the viewfinder diopter until the view is sharp. To do this, pull out on the adjustment knob beside the viewfinder and turn it until the view is sharp. Then press it back in to lock the setting.
6. Download and install any Nikon software you want to have available.
7. Insert memory card
8. Scroll through all of the menu tabs to configure the camera as follows:
9. Playback Menu: Display Options: RGB Histogram (I want to see the graph of individual channels)
10. Playback Menu: Image review: On
11. Photo Shooting Menu: Image Quality: RAW
12. Photo Shooting Menu: Set Picture Control: Neutral with sharpness set to "1" and all other parameters set to "0" (this option provides a low contrast view and better shows available dynamic in the histogram)
13. Photo Shooting Menu: High ISO NR: Off (Low is also a good option)
14. Photo Shooting Menu: Vignette control: Off
15. Movie Shooting Menu: Frame size/frame rate: 3840x2160; 30p
16. Movie Shooting Menu: Set Picture Control: Standard with Sharpening = +2
17. Movie Shooting Menu: High ISO NR: Low
18. Custom Setting Menu: Autofocus: AF-C priority selection: Focus
19. Custom Setting Menu: Autofocus: 3D-tracking face-detection: On
20. Custom Setting Menu: Autofocus: Store by orientation: Focus point
21. Custom Setting Menu: Shooting/display: ISO display: ON
22. Custom Setting Menu: Viewfinder grid display: On
23. Custom Setting Menu: Bracketing/flash: Bracketing order: Under > MTR > over (having my bracketed shots in brightness sequence makes post processing visually easier)
24. Custom Setting Menu: Controls: Custom control assignment: Fn1: Viewfinder virtual horizon, RESET Select center focus point, Sub-selector: Same as multi selector
25. Custom Setting Menu: Controls: Custom control assignment: f10: Assign MB-D18 buttons: Fn button: Viewfinder virtual horizon
26. Setup Menu: Date and time: <use current>
27. Setup Menu: Format memory card
28. Setup Menu: Copyright information: <set as desired>, Attach copyright information: selected
29. Setup Menu: Airplane mode: ON
30. Setup Menu: Slot empty release lock: Lock (I want the camera to prevent me from taking a picture if a memory card is not installed)
31. My Menu: Add items: Setup menu: Format memory card, Lock mirror up for cleaning, Focus shift shooting, Shooting menu: Long exposure noise reduction, Flicker reduction; Shooting/display: d5 Exposure delay mode

To copy this configuration would mean that you intend to shoot similar to how I shoot – including shooting in RAW-only format (highly recommended). While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera goes in for a service visit, the camera will likely be returned in a reset-to-factory state (unless you request otherwise). If your camera ever needs reset to factory settings any reason (or you purchase a second model), you will be ready to restore your setup quickly while ensuring that you do not miss an important setting. Your list will ensure that you do not miss an important setting when putting the camera into service.

More Information

Nikon D850 Review

The Nikon D850 is in stock at B&H | Amazon | Adorama | WEX.

Rent the Nikon D850 from Lensrentals.

I have the Nikon Z 6 and Nikon Z 7 in my hands and it is time to set up the cameras for use. Following are the 31 steps I took to make an out-of-the-box Nikon Z 6/7 ready for use.

1. Charge battery
2. Install neck strap
3. Mount a lens
4. Insert charged battery and power on the camera
5. While looking at an in-focus subject through the viewfinder, adjust the viewfinder diopter until the view is sharp. To do this, pull out on the adjustment knob beside the viewfinder and turn it until the view is sharp. Then press it back in to lock in the setting.
6. Download and install any Nikon software you want to have available.
7. Insert memory card
8. Scroll through all of the menu tabs to configure the camera as follows:
9. Playback Menu: Display Options: Highlights, RGB Histogram
10. Playback Menu: Image review: On
11. Photo Shooting Menu: Image Quality: NEF (RAW)
12. Photo Shooting Menu: Set Picture Control: Neutral with Sharpening = +1, all other parameters set to 0 (this option provides a low contrast view and better shows available dynamic in the histogram)
13. Photo Shooting Menu: High ISO NR: OFF (Low is also a good option)
14. Photo Shooting Menu: Vignette control: OFF
15. Photo Shooting Menu: Diffraction compensation: OFF
16. Photo Shooting Menu: Auto distortion control: OFF (* I'm not able to turn this setting off with the Z 24-70 f/4 S Lens mounted)
17. Movie Shooting Menu: Frame size/frame rate: 3840x2160; 30p
18. Movie Shooting Menu: Set Picture Control: Standard with Sharpening = +2, Mid-range sharpness = +1, Clarity = +1, all other parameters set to 0
19. Movie Shooting Menu: High ISO NR: Low
20. Custom Setting Menu: Auto Focus: AF-C priority selection: Focus
21. Custom Setting Menu: Auto Focus: AF-S priority selection: Focus
22. Custom Setting Menu: Auto Focus: Store by orientation: Yes
23. Custom Setting Menu: Shooting/display: Framing grid display: On
24. Custom Setting Menu: Bracketing/flash: Bracketing order: Under > MTR > over (having my bracketed shots in brightness sequence makes post processing visually easier)
25. Custom Setting Menu: Controls: Custom control assignment: Sub-selector: Same as multi selector; Sub-selector center: RESET Select center focus point, Fn1 button: AF lock only
26. Setup Menu: Format memory card
27. Setup Menu: Time zone and date: <use current>
28. Setup Menu: Copyright information: <set as desired>, Attach copyright information: selected
29. Setup Menu: Airplane mode: ON
30. Setup Menu: Slot empty release lock: Lock (I want the camera to prevent me from taking a picture if a memory card is not installed)
31. My Menu: Add items: Shooting/display: d4 Exposure delay mode (great for tripod use); Setup menu: Format memory card, Shooting menu: Vibration reduction, Long exposure noise reduction, Flicker reduction, Silent photography, Focus shift shooting

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format (highly recommended). While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera goes in for a service visit, the camera will likely be returned in a reset-to-factory state (unless you request otherwise). If your camera ever needs reset to factory settings any reason (or you purchase a second model), having your list available means you will be ready to restore your setup quickly while ensuring that you do not miss an important setting when putting the camera into service.

More Information

Nikon Z 6 | Nikon Z 7

The Nikon Z 6 is in stock at B&H | Amazon | Adorama | WEX.

Rent the Nikon Z 6 from Lensrentals.

The Nikon Z 7 is in stock at B&H | Amazon | Adorama | WEX.

Rent the Nikon Z 7 from Lensrentals.

After opening the Canon EOS R box, it is time to set up the camera for use. Following are the 40 steps I took to make a new EOS R ready for use.

1. Open the box, find the battery, place it in the charger and plug it in.
2. While the battery is charging, unpack the other items you want from the box.
3. Download and install the Canon Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility and Lens Registration Utility are the options I manually include in the install.
4. Attach the neck strap.
5. Insert the battery (after charging completes) and power the camera on.
6. The date, time and time zone setup screen will show at the first startup. Use the rear Cross Keys and Set button to update this information.
7. Insert a memory card (don't forget to format the card via the tools menu option before taking pictures).
8. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
9. Scroll through all of the menu tabs to configure the camera as follows:
10. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Cross Keys to set JPEG to "-" (RAW image files provide the highest quality and are especially valuable for post processing work)
11. Shooting Menu, Tab 1: Image review: 4 sec. (or sometimes off to increase shooting speed in the field)
12. Shooting Menu, Tab 1: Release shutter without card: Disable (only in a retail store do you want to press the shutter release without saving the image file)
13. Shooting Menu, Tab 2: Lens Aberration Correction: All options "OFF" (though Chromatic Aberration correction is a good option to leave enabled for most)
14. Shooting Menu, Tab 3: Auto Lighting Optimizer: Off (I'll make these adjustments in post if needed)
15. Shooting Menu, Tab 4: White balance: AWB W (White) (I seldom use another white balance setting while shooting, though I often adjust modestly during post processing)
16. Shooting Menu, Tab 4: Picture Style: Neutral with Sharpness = 2 (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
17. Shooting Menu, Tab 5: Long exp. noise reduction: Auto (when active, LENR captures a dark image that is used to correct the long exposure noise in the primary image)
18. Shooting Menu, Tab 5: High speed NR: Off (or Low) (noise reduction is destructive to images details – I prefer to add noise reduction sparingly during post processing)
19. Shooting Menu, Tab 6: High speed display: ON (note that the camera must be set to high speed frame rate to enable this option)
20. AF Menu, Tab 1: AF frame size: Small (this allows me to precisely select the point of focus – I opt for the larger frame size if contrast is not sufficient (seldom) and Face Tracking with Eye AF is usually optimal for photographing people)
21. AF Menu, Tab 1: Touch & drag AF settings: Touch & drag AF: Enable (allows a thumb drag across the rear LCD to quickly move the AF point while looking through the electronic viewfinder)
22. AF Menu, Tab 5: Orientation linked AF point: Separate AF pts: Pt only (instructs camera to individually save the selected AF points for vertical and horizontal orientation)
23. Playback Menu, Tab 3: Highlight Alert: Enable (causes overexposed pixels to blink)
24. Playback Menu, Tab 3: Magnify (approx.): Actual size (allows one button press during playback to zoom deeply into the image)
25. Tools Menu, Tab 1: Auto Rotate: On computer (images are properly rotated when viewed on a computer, but are always oriented to fill the LCD when viewed on the camera)
26. Tools Menu, Tab 3: Beep: Disable (probably no one wants to hear your focus confirmation beep)
27. Tools Menu, Tab 4: Shooting info. display: Screen info. settings: Enable 1 and 3
28. Tools Menu, Tab 4: Shooting info. display: VF info/toggle setting: Enable 1 and 3
29. Tools Menu, Tab 4: Shooting info. display: Grid display: 3x3 (sometimes helpful for alignment checking)
30. Tools Menu, Tab 4: Shooting info. display: Histogram disp: RGB, Small (I want to see the brightness levels of each channel separately and don't want the graph to take up much space in the display)
31. Tools Menu, Tab 6: Custom shooting mode (C1, C2): Auto update set: Enable (see Configuring Custom Shooting Modes)
32. Tools Menu, Tab 6: Copyright information: enter as desired
33. Custom Functions Menu, Tab 1: Bracketing auto cancel: OFF (I want to control when AEB (Auto Exposure Bracketing) is enabled and disabled)
34. Custom Functions Menu, Tab 1: Bracketing sequence: -0+ (if images are captured in brightness sequence, they are easier to work with during post processing. Capturing the darkest image first means that I quickly get at least the first frame)
35. Custom Functions Menu, Tab 3: RF lens MF focus ring sensitivity: Linked to rotation degree (I do not like variable speed AF rings)
36. Custom Functions Menu, Tab 4: Customize buttons: Up, Down, Left and Right buttons: Direct AF point selection
37. Custom Functions Menu, Tab 4: Customize M-Fn bar: ISO speed, ISO <, ISO >
38. Custom Functions Menu, Tab 5: Retract lens on power off: OFF (avoids having a carefully-selected focus distance from resetting when camera auto powers off)
39. My Menu: Add the first tab; Register the following options for Tab 1: Expo. simulation, Long exposure noise reduction, Format card, Date/Time/Zone (great for monitoring what time it is), Sensor cleaning, Expo.comp./AEB (found back up near the top of the list) (nothing in my My Menu is found on the Quick Control display as those functions are already quickly accessed)
40. With a lens mounted and a subject focused on, adjust the viewfinder diopter until the scene is sharp

To copy this configuration would mean that you intend to shoot similar to how I shoot – including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera goes in for a service visit, the camera will be returned in a reset-to-factory state (unless you request otherwise). If your camera ever needs reset to factory settings for other reasons, you will be ready to restore your setup quickly while ensuring that you do not miss an important setting. Your list will ensure that you do not miss an important setting when putting the camera back into service. And, if you purchase another same or similar camera, you will be able to quickly set it up.

More Information

• Canon EOS R Review

The Canon EOS R is in stock at B&H | Amazon | Adorama

The highly-welcomed Sony a7 III is here and I am sharing the 28 steps I took to make it ready for use. This may sound like a repeat of a similar Sony camera setup I shared not too long ago and there is good reason for that. Aside from a significantly lower resolution imaging sensor, it is hard to tell the two cameras apart.

• Charge battery
• Install neck strap
• Download and install Capture One (for Sony) and/or Sony Imaging Edge (unless your current favorite RAW image processing software supports the Sony a7 III)
• Insert charged battery and power on the camera
• Set the time zone, date, time, timeformat
• insert memory card (don't forget to format it)
• Scroll through all of the menu tabs to configure the camera as follows:
• Camera Menu 1, Tab 1: Quality: RAW
• Camera Menu 1, Tab 1: RAW File Type: Uncompressed (unless taking advantage of the about-50% smaller RAW file size)
• Camera Menu 1, Tab 2: Lens Comp.: All Off
• Camera Menu 1, Tab 3: Bracket Settings: ->0>+ (makes selecting images for HDR processing easier)
• Camera Menu 1, Tab 5: Priority Set in AF-S: AF
• Camera Menu 1, Tab 5: Priority Set in AF-C: AF
• Camera Menu 1, Tab 5: Focus Area: Flexible Spot
• Camera Menu 1, Tab 5: Swt. V/H AF Area: AF Point Only
• Camera Menu 1, Tab 9: Reset EV Comp.: Maintain
• Camera Menu 1, Tab 10: Spot Metering Point: Focus Point Link
• Camera Menu 1, Tab 12: DRO/Auto HDR: Off
• Camera Menu 1, Tab 12: Creative Style: Neutral, Sharpness = 1 (I usually process with the Natural creative style in Capture One)
• Camera Menu 2, Tab 4: Release w/o Card: Disable
• Camera Menu 2, Tab 6: Grid Line: Rule of 3rds Grid
• Camera Menu 2, Tab 8: Custom Key(Shoot.): Custom Button 1: ISO
• Camera Menu 2, Tab 9: Audio signals: Off (How to turn off the loud and usually-annoying AF beep sound)
• Setup Menu, Tab 1: Volume Settings: 3
• Setup Menu, Tab 1: Delete confirm: "Delete" first
• Setup Menu, Tab 2: Touch Operation: On
• Setup Menu, Tab 5: Copyright Info: Write Copyright Info: On, Set Photographer: {name}, Set Copyright: {name}
• My Menu: RAW File Type, Long Exposure NR; Px. Shift Multi Shoot.; Focus Mode; Anti-flicker Shoot.; Silent Shooting; Steady Shot; Format;

To copy this configuration would mean that you intend to shoot similar to how I shoot – including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. If your camera ever needs reset to factory settings, you will be ready to restore your setup quickly while ensuring that you do not miss an important setting. If you purchase another same or similar camera, you will be able to quickly set it up.

More Information

Sony a7 III

Get the Sony a7 III at B&H | Amazon | Adorama.

I have a Canon EOS M50 in my hands and just completed preparing the camera for use. Following are the 31 steps I took to make an out-of-the-box M50 ready to use.

1. Open the box, find the battery, place it in the charger and plug it in.
2. While the battery is charging, unpack the other items you want from the box.
3. Download and install the Canon Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, Photostitch and Lens Registration Utility are the options I manually include in the install.
4. Attach the neck strap.
5. Insert the battery (after charging completes) and power the camera on.
6. The date, time and time zone setup screen will show at the first startup. Use the rear cross key control and the set button to update this information.
7. Insert a memory card (don't forget to format the card via the tools menu option before taking pictures).
8. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
9. Press the Menu button and scroll through all of the available tabs to configure the camera as follows:
10. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and rear cross-keys control to set JPEG to "-"
11. Shooting Menu, Tab 1: Image review: 4 sec.
12. Shooting Menu, Tab 1: Lens aberration correction: disable all (I correct lens aberrations during post processing if warranted, but chromatic aberration correction is usually a good option to enable)
13. Shooting Menu, Tab 4: White balance: AWB W
14. Shooting Menu, Tab 4: Picture Style: Neutral with Sharpness = 1 (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
15. Shooting Menu, Tab 5: Long exp. noise reduction: Auto
16. Shooting Menu, Tab 5: High speed NR: Off (or Low) (noise reduction is destructive to images details - I prefer to add NR sparingly in post)
17. Shooting Menu, Tab 5: Touch & drag AF settings: Touch and drag AF: Enable, Positioning method: Relative
18. Shooting Menu, Tab 6: Continuous AF: Off
19. Playback Menu, Tab 4: Playback information display: Change #2 to RGB histogram, disable all options except #1 and #2
20. Function Settings Menu, Tab 1: Auto Rotate: On (computer only)
21. Function Settings Menu, Tab 3: Beep: Disable
22. Function Settings Menu, Tab 4: Shooting info. disp.: Screen info/toggle settings: Update #1 to select only basic shooting info, On screen buttons and Electronic level, all options except Detailed shooting info selected for #2 and uncheck #3, #4 and #5 (it takes too long to toggle through all of the available options during use)
23. Function Settings Menu, Tab 4: Shooting info. disp.: VF info/toggle settings: Uncheck #1, update #2 to select only Electronic level and update #3 to select Histogram disp and Electronic level
24. Function Settings Menu, Tab 4: Shooting info. disp.: Grid display: 3x3
25. Function Settings Menu, Tab 4: Shooting information display: Histogram display: RGB
26. Function Settings Menu, Tab 5: Custom Functions(C.Fn): C.Fn I ISO expansion: 1:On
27. Function Settings Menu, Tab 5: Copyright information: Enter author's name
28. Display level settings, Tab 1: Menu display: Standard
29. Display level settings, Tab 1: Mode guide: Disable
30. Display level settings, Tab 1: Feature guide: Disable
31. My Menu: Add the first tab; Register the following options for Tab 1: Long exposure noise reduction, Format card, Date/Time/Zone (great for monitoring what time it is), Expo. comp./AEB (found back up near the top of the list)

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera goes in for a service visit, the camera will be returned in a reset-to-factory state (unless you request otherwise). Your list will ensure that you do not miss an important setting when putting the camera back into service.

More Information

Canon EOS M50

The Canon EOS M50 is in stock at B&H | Amazon | Adorama.

The highly-anticipated Sony a7R III is here and I am sharing the 28 steps I took to make it ready for use.

• Charge battery
• Install neck strap
• Download and install Capture One (for Sony) and/or Sony Imaging Edge (unless your current favorite RAW image processing software supports the Sony a9)
• Insert charged battery and power on the camera
• Set the time zone, date, time, timeformat
• insert memory card (don't forget to format it)
• Scroll through all of the menu tabs to configure the camera as follows:
• Camera Menu 1, Tab 1: Quality: RAW
• Camera Menu 1, Tab 1: RAW File Type: Uncompressed (unless taking advantage of the about-50% smaller RAW file size)
• Camera Menu 1, Tab 2: Lens Comp.: All Off
• Camera Menu 1, Tab 3: Bracket Settings: ->0>+ (makes selecting images for HDR processing easier)
• Camera Menu 1, Tab 5: Priority Set in AF-S: AF
• Camera Menu 1, Tab 5: Priority Set in AF-C: AF
• Camera Menu 1, Tab 5: Focus Area: Flexible Spot
• Camera Menu 1, Tab 5: Swt. V/H AF Area: AF Point Only
• Camera Menu 1, Tab 9: Reset EV Comp.: Maintain
• Camera Menu 1, Tab 10: Spot Metering Point: Focus Point Link
• Camera Menu 1, Tab 12: DRO/Auto HDR: Off
• Camera Menu 1, Tab 12: Creative Style: Neutral, Sharpness = 1 (I usually process with the Natural creative style in Capture One)
• Camera Menu 2, Tab 4: Release w/o Card: Disable
• Camera Menu 2, Tab 6: Grid Line: Rule of 3rds Grid
• Camera Menu 2, Tab 8: Custom Key(Shoot.): Custom Button 1: ISO, Custom Button 4: Focus Magnifier
• Camera Menu 2, Tab 9: Audio signals: Off (How to turn off the loud and usually-annoying AF beep sound)
• Setup Menu, Tab 1: Volume Settings: 3
• Setup Menu, Tab 1: Delete confirm: "Delete" first
• Setup Menu, Tab 2: Touch Operation: On
• Setup Menu, Tab 5: Copyright Info: Write Copyright Info: On, Set Photographer: {name}, Set Copyright: {name}
• My Menu: RAW File Type, Long Exposure NR; Px. Shift Multi Shoot.; Focus Mode; Anti-flicker Shoot.; Silent Shooting; Steady Shot; Format;

I of course make other menu and setting changes based on current shooting scenarios, but this list covers my initial camera setup process.

To copy this configuration would mean that you intend to shoot similar to how I shoot – including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. If your camera ever needs reset to factory settings, you will be ready to restore your setup quickly while ensuring that you do not miss an important setting.

More Information

Sony a7R III

Get the Sony a7R III at B&H | Amazon | Adorama | WEX.

I have a Canon EOS M100 in my hands and it is time to set up the camera for use. Following are the 25 steps I took to make an out-of-the-box M100 ready for use.

1. Open the box, find the battery, place it in the charger and plug it in.
2. While the battery is charging, unpack the other items you want from the box. This is a good time to install the neck strap.
3. Download and install the Canon Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, Photostitch and Lens Registration Utility are the options I manually include in the install.
4. Insert the battery (after charging completes) and power the camera on.
5. The date, time and time zone setup screen will show at the first startup. Use the Rear Control dial and Set button to update this information.
6. Insert a memory card (don't forget to format the card via the tools menu option before taking pictures).
7. If the lens being used retracts beyond a usable focal length (the EF-M 15-45 for example), unlock and extend the lens.
8. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options). Use the middle switch setting (Creative Assist by default) and scroll up to the advanced modes.
9. Scroll through all of the menu tabs to configure the camera as follows:
10. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Rear Control arrow (press left or right) to set JPEG to "-"
11. Shooting Menu, Tab 1: Shooting information display: Grid display: 3x3, Histogram: RGB
12. Shooting Menu, Tab 2: Image review: Off (without a review display being shown and cleared, the viewfinder becomes ready-for-shooting faster)
13. Shooting Menu, Tab 3: Continuous AF: Off (increases battery life)
14. Shooting Menu, Tab 4: Lens aberration correction: disable all (I correct lens aberrations during post processing if warranted, though enabling CA correction is usually a good idea and if shooting in JPG mode, consider enabling other options as well.)
15. Shooting Menu, Tab 5: Auto Lighting Optimizer: Off (again, those shooting in JPG mode might want to explore the results of this option)
16. Shooting Menu, Tab 6: Picture Style: Neutral with Sharpness = 1 (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture. If shooting in JPG mode, selecting "Standard" is probably a better option.)
17. Shooting Menu, Tab 6: Long exp. noise reduction: Auto
18. Shooting Menu, Tab 6: High speed NR: Off (or Low) (Noise reduction is destructive to images details - I prefer to add NR sparingly in post. Select "Low" if shooting in JPG format).
19. Tools Menu, Tab 3: Beep: Off
20. Tools Menu, Tab 3: Hints & Tips: Off
21. Tools Menu, Tab 3: Mode icon size/info: Small, no info
22. Tools Menu, Tab 4: Copyright info: Enter Author's Name: [enter name]
23. Exit the menu, press the playback button and press the Menu button.
24. Playback Menu, Tab 1: Transition Effect: Off
25. Playback Menu, Tab 1: Auto Rotate: Off (always uses full LCD for display)
I make other menu and setting changes based on current shooting scenarios, but this list covers my initial camera setup process.

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera goes in for a service visit, the camera will be returned in a reset-to-factory state (unless you request otherwise). Your list will ensure that you do not miss an important setting when putting the camera back into service.

More Information

Canon EOS M100

The Canon EOS M100 is in stock at B&H | Amazon | Adorama | WEX

I have the much-anticipated Canon EOS 6D Mark II in my hands and it is time to set up the camera for use. Following are the 35 steps I take to make an out-of-the-box 6D II ready for use. While 35 sounds like a large number of steps, nothing here is difficult. Just take one step at a time.

1. Open the box, find the battery and charger and plug it in. If you have another charged LP-E6/LP-E6N battery available, you can continue to the battery-required steps without a wait.
2. While the battery is charging, unpack the other items you want from the box. This is also a good time to grip the camera, taking in the new-camera grippyness that is right up there with new car smell.
3. Download and install the Canon Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, Photostitch and Lens Registration Utility are the options I manually include in the install.
4. Attach the neck strap.
5. Insert the battery (after charging completes).
6. Power the camera on.
7. Insert a memory card (don't forget to format the card via the tools menu option before taking pictures).
8. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
9. Scroll through all of the menu tabs to configure the camera as follows:
10. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Rear Control dial to set JPEG to "-"
11. Shooting Menu, Tab 1: Image review: 4 sec.
12. Shooting Menu, Tab 1: Release shutter without card: Disable/off (this should be the default and I highly recommend turning this for-showrooms feature off)
13. Shooting Menu, Tab 1: Lens aberration correction: All disabled (though I suggest leaving CA correction enabled for most uses – all can be applied in DPP)
14. Shooting Menu, Tab 2: ISO Speed Settings: ISO Speed range: 100-H2(102400), Auto ISO Speed range: 100-40000
15. Shooting Menu, Tab 2: White balance: AWB-W (Auto: White priority)
16. Shooting Menu, Tab 3: Picture Style: Neutral with Sharpness Strength set to "1" (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
17. Shooting Menu, Tab 3: Long exposure noise reduction: I usually have this option set to "Auto", but my choice varies for the situation.
18. Shooting Menu, Tab 3: High ISO speed noise reduction: Off (noise reduction is destructive to images details – I prefer to add NR sparingly in post)
19. Playback Menu, Tab 3: Highlight alert: Enable (flash portions of images that are overexposed)
20. Playback Menu, Tab 3: Histogram disp: RGB (I want to monitor all three color channels for blown or blocked pixels)
21. Playback Menu, Tab 3: Magnification (apx): Actual size (from selected AF point)
22. Tools Menu, Tab 1: Auto rotate: On/Computer only (this provides the largest playback image size on the camera LCD)
23. Tools Menu, Tab 2: Date/Time/Zone: Use the Rear Control dial and the Set button to update this information.
24. Tools Menu, Tab 2: Viewfinder display: Viewfinder level: Show, VF grid display: Show, Flicker detection: Show
25. Tools Menu, Tab 3: Mode guide: Disable
26. Tools Menu, Tab 3: Feature guide: Disable
27. Tools Menu, Tab 4: Beep: Disable
28. Tools Menu, Tab 5: Custom shooting mode (C1-C2): Auto update set: Enable (see also: Configuring Custom Shooting Modes)
29. Tools Menu, Tab 5: Copyright information: Enter information as desired
30. Custom Functions: C.Fn I:Exposure: Bracketing auto cancel: Disable
31. Custom Functions: C.Fn II:Autofocus: AI servo 1st image priority: Focus
32. Custom Functions: C.Fn II:Autofocus: AI servo 2nd image priority: Focus
33. Custom Functions: C.Fn II:Autofocus: Orientation linked AF point: Separate AF pts: Pt only
34. Custom Functions, C.Fn III:Operation/Others: 4 Custom Controls: AF-ON: One shot AI Servo; Multicontroller: Direct AF point selection
35. My Menu: Add the first tab; Register the following options for Tab 1: Long exposure noise reduction, Mirror lockup, Format card, Date/Time/Zone (great for monitoring what time it is), Sensor cleaning, Expo.comp./AEB (back up near the top of the list)

To copy this configuration means that you intend to shoot similar to how I shoot - including shooting in RAW-only format. My setup works great for me, but your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera goes in for a service visit, the camera will be returned in a reset-to-factory state (unless you request otherwise). Your list will ensure that you do not miss an important setting when putting the camera back into service.

More Information

Canon EOS 6D Mark II

The Canon EOS 6D Mark II is in stock at B&H | Amazon | Adorama.

After using the Sony a9 for nearly two months, I thought I'd share the setup steps I used for this camera. Following are the 27 steps I took to make an out-of-the-box Sony a9 ready for use.

• Charge battery
• Install neck strap
• Download and install Capture One (for Sony) (unless your current favorite image processing software supports the Sony a9)
• Insert charged battery and power on the camera
• Set the time zone, date, time, timeformat
• insert memory card (don't forget to format it)
• Scroll through all of the menu tabs to configure the camera as follows:
• Camera Menu 1, Tab 1: Quality: RAW
• Camera Menu 1, Tab 1: RAW File Type: Uncompressed (unless taking advantage of the 20 fps frame rate or wanting an about-50% smaller RAW file size)
• Camera Menu 1, Tab 2: Lens Comp.: All Off
• Camera Menu 1, Tab 4: Priority Set in AF-S: AF
• Camera Menu 1, Tab 4: Priority Set in AF-C: AF
• Camera Menu 1, Tab 4: Focus Area: Flexible Spot
• Camera Menu 1, Tab 7: Reset EV Comp.: Maintain
• Camera Menu 1, Tab 7: Spot Metering Point: Focus Point Link
• Camera Menu 1, Tab 10: DRO/Auto HDR: Off
• Camera Menu 1, Tab 10: Creative Style: Neutral, Sharpness = 1 (I process with the Natural creative style in Capture One)
• Camera Menu 2, Tab 4: Release w/o Card: Disable
• Camera Menu 2, Tab 6: Grid Line: Rule of 3rds Grid
• Camera Menu 2, Tab 8: Custom Key(Shoot.): Custom Button 1: ISO
• Camera Menu 2, Tab 9: Shutter Type: Electronic Shut. (I sometimes opted for the Auto setting)
• Camera Menu 2, Tab 9: Audio signals: On:e-shutter only (set to Off if photographing in a quiet setting)
• Network Menu, Tab 1: Airplane Mode: On
• Setup Menu, Tab 1: Volume Settings: 3
• Setup Menu, Tab 1: Delete confirm: "Delete" first
• Setup Menu, Tab 2: Touch Operation: On
• Setup Menu, Tab 4: Copyright Info: Write Copyright Info: On, Set Photographer: {name}, Set Copyright: {name}

I of course make other menu and setting changes based on current shooting scenarios, but this list covers my typical camera setup.

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. If the camera is ever reset-to-factory state, your list will ensure that you do not miss an important setting when putting the camera back into service.

More Information

Sony a9

The Sony a9 is in stock at B&H | Amazon | Adorama | WEX.

The Canon EOS Rebel SL2 just showed up and it is time to set up the camera for use. Following are the 27 steps I took to make an out-of-the-box Canon EOS Rebel SL2 ready for use.

1. Open the box, find the battery and charger and plug it in. If you have another charged LP-E17 battery available, you can continue to the battery-required steps without a wait.
2. While the battery is charging, unpack the other items you want from the box. This is a good time to install the neck strap.
3. Download and install the Canon Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, Photostitch and Lens Registration Utility are the options I manually include in the install.
4. Insert the battery (after charging completes, unless you can't wait).
5. Power the camera on.
6. The date and time setup screen will show at startup the first time. Use the Rear Control dial and Set button to update this information.
7. Insert a memory card (don't forget to format the card via the tools menu option before taking pictures).
8. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
9. Scroll through all of the menu tabs to configure the camera as follows:
10. Shooting Menu, Tab 1: Image quality: set to RAW (I highly recommend a RAW workflow)
11. Shooting Menu, Tab 1: Image review: 4 sec.
12. Shooting Menu, Tab 1: Release without card: Off/Disable (I highly recommend this setting)
13. Shooting Menu, Tab 2: Lens aberration correction: All disabled (though I suggest leaving CA correction enabled for most uses – all can be applied in DPP)
14. Shooting Menu, Tab 3: White balance: AWB-W (Auto: White priority)
15. Shooting Menu, Tab 4: Picture Style: Neutral with Sharpness Strength set to "1" (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
16. Shooting Menu, Tab 4: Long exposure noise reduction: I usually have this option set to "Auto", but my choice varies for the situation.
17. Shooting Menu, Tab 4: High ISO speed noise reduction: Off (noise reduction is destructive to images details – I prefer to add NR sparingly in post, but "Low" is also a good choice)
18. Playback Menu, Tab 3: Histogram disp: RGB (I want to monitor all three color channels for blown or blocked pixels)
19. Tools Menu, Tab 1: Auto rotate: On/Computer only (this provides the largest playback image size on the camera LCD)
20. Tools Menu, Tab 3: Beep: Disable
21. Tools Menu, Tab 4: Custom Functions: C.Fn I:ISO expansion: On
22. Tools Menu, Tab 4: Custom Functions: C.Fn I:Exposure comp. auto cancel: Disable
23. Tools Menu, Tab 4: Copyright information: Enter author's name: [your name]
24. Display Level Menu: Menu guide: Standard (required to gain access to My Menu)
25. Display Level Menu: Mode guide: Disable (novices may appreciate this setting enabled)
26. Display Level Menu: Feature guide: Disabled (novices may appreciate this setting enabled)
27. My Menu: Add the first tab; Register the following options for Tab 1: Long exposure noise reduction, Mirror lockup, Format card, Date/Time/Zone (great for monitoring what time it is), Sensor cleaning, Expo.comp./AEB

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format. My setup is ideal for me, but keep in mind that your needs may differ. The best use of this list may be for tweaking of your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera goes in for a service visit, the camera will be returned in a reset-to-factory state (unless you request otherwise). Your list will ensure that you do not miss an important setting when putting the camera back into service.

More Information

Canon EOS Rebel SL2

The very inexpensive Canon EOS Rebel SL2 is in stock at B&H | Amazon | Adorama.

With a brand new Canon EOS M6 (a great little camera) in my possession, it is time to set up the camera for use. Following are the 30 steps I took to make a fresh-out-of-the-box M6 ready for use.

1. Open the box, find the battery, place it in the charger and plug it in.
2. While the battery is charging, unpack the other items you want from the box. This is a good time to install the neck strap.
3. Download and install the Canon Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, Photostitch and Lens Registration Utility are the options I manually include in the install.
4. Insert the battery (after charging completes) and power the camera on.
5. The date, time and time zone setup screen will show at the first startup. Use the Rear Control dial and Set button to update this information.
6. Insert a memory card (don't forget to format the card via the tools menu option before taking pictures).
7. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
8. Scroll through all of the menu tabs to configure the camera as follows:
9. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Rear Control dial to set JPEG to "-"
10. Shooting Menu, Tab 1: Shooting information display: Screen info/toggle settings: Update #1 to select only Grid display and Electronic level (all options selected for #2), uncheck #3 and #4 (I may alter these settings later)
11. Shooting Menu, Tab 1: Shooting information display: VF info/toggle settings: Uncheck #1, update #2 to select only Grid display and Electronic level, check all options for #3 (again, I may alter these settings later)
12. Shooting Menu, Tab 1: Shooting information display: Histogram display: RGB
13. Shooting Menu, Tab 2: Image review: Off (without a review display being shown and cleared, the viewfinder becomes ready-for-shooting faster)
14. Shooting Menu, Tab 3: Continuous AF: Off (increases battery life)
15. Shooting Menu, Tab 4: MF Peaking Settings: Peaking: On
16. Shooting Menu, Tab 4: Lens aberration correction: disable all (I correct lens aberrations during post processing if warranted, though enabling CA correction is usually a good idea and if shooting in JPG mode, consider enabling other options as well.)
17. Shooting Menu, Tab 5: Auto Lighting Optimizer: Off (again, those shooting in JPG mode might want to explore the results of this option)
18. Shooting Menu, Tab 6: Picture Style: Neutral with Sharpness = 1 (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture. If shooting in JPG mode, selecting "Standard" is probably a better option.)
19. Shooting Menu, Tab 6: Long exp. noise reduction: Auto
20. Shooting Menu, Tab 6: High speed NR: Off (or Low) (Noise reduction is destructive to images details - I prefer to add NR sparingly in post. Select "Low" if shooting in JPG format).
21. Tools Menu, Tab 3: Beep: Off
22. Tools Menu, Tab 3: Hints & Tips: Off
23. Tools Menu, Tab 4: Custom shooting mode (C1, C2): Auto update set: Enable (Custom shooting modes are great – see Configuring Custom Shooting Modes for more information)
24. Custom Functions Menu, Tab 1: C.Fn II: Others: Set M.Fn button to ISO (I may make more changes here after acclimating to this camera)
25. My Menu: Add the first tab; Register the following options for Tab 1: Long exposure noise reduction, Format, Date/Time/Zone (great for monitoring what time it is), AEB (found back up near the top of the list)
26. To get to the Playback Menu, take a picture, playback the picture and while it is displayed, press the Menu button.
27. Playback Menu, Tab 4: Highlight Alert: Enable
28. Playback Menu, Tab 4: Auto Rotate: Off (always uses full LCD for display)
29. Playback Menu, Tab 5: * resize: Enable
30. Playback Menu, Tab 5: Magnify (approx.): Actual size (zooms to 100% pixel level, ideal for checking sharpness)

If you intend to mirror my RAW image capture workflow, this configuration would likely be ideal for you. While my setup is optimal for me, use your judgement to alter this list for your own needs and preferences.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera goes in for a service visit, the camera will be returned in a reset-to-factory state (unless you request otherwise). Your list will ensure that you do not miss an important setting when putting the camera back into service.

More Information

Canon EOS M6

The Canon EOS M6 is in stock at B&H | Amazon | Adorama.

With a Canon EOS 77D (nearly the same as the Canon EOS Rebel T7i) in my hands, it is time to set up the camera for use. How do I set up a 77D for use? Following are the 27 steps I took to get started with a brand new 77D or T7i.

1. Open the box, find the battery and charger and plug it in. If you have another charged LP-E6/LP-E6N battery available, you can continue to the battery-required steps without a wait.
2. While the battery is charging, unpack the other items you want from the box. This is a good time to install the neck strap.
3. Download and install the Canon Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, Photostitch and Lens Registration Utility are the options I manually include in the install.
4. Insert the battery (after charging completes).
5. Power the camera on.
6. The date and time setup screen will show at startup the first time. Use the Rear Control dial and Set button to update this information.
7. Insert a memory card (don't forget to format the card via the tools menu option before taking pictures).
8. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
9. Scroll through all of the menu tabs to configure the camera as follows:
10. Shooting Menu, Tab 1: Image quality: set RAW to "RAW"
11. Shooting Menu, Tab 1: Image review: 4 sec.
12. Shooting Menu, Tab 1: Release without card: Off (highly recommended)
13. Shooting Menu, Tab 1: Lens aberration correction: All disabled (though I suggest leaving CA correction enabled for most uses - all can be applied in DPP)
14. Shooting Menu, Tab 3: Picture Style: Neutral with Sharpness Strength set to "1" (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
15. Shooting Menu, Tab 3: Long exposure noise reduction: I usually have this option set to "Auto", but my choice varies for the situation.
16. Shooting Menu, Tab 3: High ISO speed noise reduction: Off (noise reduction is destructive to images details - I prefer to add NR sparingly in post)
17. Shooting Menu, Tab 2: White balance: AWB-W (Auto: White priority)
18. Playback Menu, Tab 3: Histogram disp: RGB (I want to monitor all three color channels for blown or blocked pixels)
19. Tools Menu, Tab 1: Auto rotate: On/Computer only (this provides the largest playback image size on the camera LCD)
20. Tools Menu, Tab 2: Viewfinder display: Viewfinder level: Show, VF grid display: Show, Flicker detection: Show
21. Tools Menu, Tab 3: Beep: Disable
22. Tools Menu, Tab 4: Custom Functions: C.Fn I:ISO expansion: On
23. Tools Menu, Tab 4: Custom Functions: C.Fn I:Exposure comp. auto cancel: Disable
24. Tools Menu, Tab 4: Copyright information: Enter author's name: [your name]
25. Display Level Menu: Mode guide: Disable
26. Display Level Menu: Feature guide: Disable
27. My Menu: Add the first tab; Register the following options for Tab 1: Long exposure noise reduction, Mirror lockup, Format card, Date/Time/Zone (great for monitoring what time it is), Sensor cleaning, Expo.comp./AEB (back up near the top of the list)

Using this camera configuration means that you intend to shoot similar to how I shoot – including shooting in RAW-only format. While this setup works ideally for me, your best use of this list may be for tweaking your own setup preferences.

Cameras continue to become more complex and if you can't remember your own menu setup parameters, it is a very good idea to keep an up-to-date list such as this one. If your camera goes off to a service visit, it will be returned in a reset-to-factory state (unless you request otherwise). Your list will ensure that you do not miss an important setting when putting the camera back into service.

More Information

Canon EOS Rebel T7i
Canon EOS 77D

The Canon EOS 77D is in stock at B&H | Amazon | Adorama.

The Canon EOS Rebel T7i / 800D is also available at B&H | Amazon | Adorama.

I have a Canon EOS M5 in my hands and it is time to set up the camera for use. Following are the 31 steps I took to make an out-of-the-box Canon EOS M5 ready to use (please note that these steps may change slightly as I continue to dial in this camera for my uses).

1. Open the box, find the battery, place it in the charger and plug it in.
2. While the battery is charging, unpack the other items you want from the box.
3. Download and install the Canon Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, Photostitch and Lens Registration Utility are the options I manually include in the install.
4. Attach the neck strap.
5. Insert the battery (after charging completes) and power the camera on.
6. The date, time and time zone setup screen will show at the first startup. Use the Rear Control dial and the Set button to update this information.
7. Insert a memory card (don't forget to format the card via the tools menu option before taking pictures).
8. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
9. Scroll through all of the menu tabs to configure the camera as follows:
10. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Rear Control dial to set JPEG to "-"
11. Shooting Menu, Tab 1: Shooting information display: Screen info/toggle settings: Update #1 to select only Grid display and Electronic level (all options selected for #2), uncheck #3 and #4 (I may alter these settings later)
12. Shooting Menu, Tab 1: Shooting information display: VF info/toggle settings: Uncheck #1, update #2 to select only Grid display and Electronic level, check all options for #3 (again, I may alter these settings later)
13. Shooting Menu, Tab 1: Shooting information display: Histogram dispay: RGB
14. Shooting Menu, Tab 2: Image review: 4 sec.
15. Shooting Menu, Tab 3: Continuous AF: Off
16. Shooting Menu, Tab 4: MF Peaking Settings: Peaking: On
17. Shooting Menu, Tab 4: Lens aberration correction: disable all (I correct lens aberrations during post processing if warranted)
18. Shooting Menu, Tab 5: Auto Lighting Optimizer: Off
19. Shooting Menu, Tab 6: Picture Style: Neutral with Sharpness = 1 (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
20. Shooting Menu, Tab 6: Long exp. noise reduction: Auto
21. Shooting Menu, Tab 6: High speed NR: Off (or Low) (noise reduction is destructive to images details - I prefer to add NR sparingly in post)
22. Tools Menu, Tab 3: Beep: Off
23. Tools Menu, Tab 3: Hints & Tips: Off
24. Tools Menu, Tab 4: Custom shooting mode (C1, C2): Auto update set: Enable (see also: Configuring Custom Shooting Modes)
25. Custom Functions Menu, Tab 1: C.Fn II: Others: Set M.Fn button to ISO (I may make more changes here after acclimating to this camera)
26. My Menu: Add the first tab; Register the following options for Tab 1: Long exposure noise reduction, Format card, Date/Time/Zone (great for monitoring what time it is), Expo.comp./AEB (found back up near the top of the list)
27. To get to the Playback Menu, take a picture, playback the picture and while it is displayed, press the Menu button.
28. Playback Menu, Tab 4: Highlight Alert: Enable
29. Playback Menu, Tab 4: Auto Rotate: Off
30. Playback Menu, Tab 5: * resize: Enable
31. Playback Menu, Tab 5: Magnify (approx.): Actual size

To copy this configuration would mean that you intend to shoot similar to how I shoot - including shooting in RAW-only format. While this setup works great for me, your best use of this list may be for tweaking your own setup.

Unless you are certain that you can remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera goes in for a service visit, the camera will be returned in a reset-to-factory state (unless you request otherwise). Your list will ensure that you do not miss an important setting when putting the camera back into service.

More Information: Canon EOS M5

I was not in the habit of sharing my camera setup steps when initially receiving the Canon EOS 5D Mark III DSLR camera, but by request, I'm sharing them with you now. Here are the 37 steps to how I setup my Canon EOS 5D Mark III.

1. Open the box, find the battery and charger and plug it in. If you have another charged LP-E6/LP-E6N battery available, you can continue to the battery-required steps without a wait. Or, the supplied battery may have enough charge to take you through these steps if you can't wait.
2. While the battery is charging, unpack the other items you want from the box. For me, this is primarily the camera, the eye cup, the neck strap and the Canon Solution Disk.
3. Download and install the latest Canon EOS Solution Disk software on your computer to get support for the latest camera(s). Canon Digital Photo Pro (DPP), EOS Utility, Photostitch and Lens Registration Utility are the options I manually include in the install.
4. Attach the neck strap.
5. Insert a sufficiently charged battery.
6. Power the camera on.
7. The date and time setup screen will show at startup the first time. Use the Rear Control dial and the Set button to update this information.
8. Insert one (or two) memory card(s) (format them via the tools menu option before taking pictures).
9. Set the camera's mode to Av, Tv or M (some modes provide only a small subset of available menu options).
10. Scroll through all of the menu tabs to configure the cameras as follows:
11. Shooting Menu, Tab 1: Image quality: Use top dial to set RAW to "RAW" and Rear Control dial to set JPEG to "-"
12. Shooting Menu, Tab 1: Image review: 4 sec.
13. Shooting Menu, Tab 1: Beep: Disable
14. Shooting Menu, Tab 1: Release without card: Disable/off (I highly recommend this setting)
15. Shooting Menu, Tab 1: Lens aberration correction: All disabled (though I suggest leaving CA correction enabled for most uses - all can be applied to a RAW file in DPP)
16. Shooting Menu, Tab 2: ISO Speed Settings: ISO Speed range: L(50)-H1(51200), Auto ISO Speed range: 100-25600
17. Shooting Menu, Tab 2: Auto Lighting Optimizer: Disabled
18. Shooting Menu, Tab 3: Picture Style: Neutral with Sharpness Strength set to "1" (Note: the low contrast "Neutral" picture style provides a histogram on the back of the camera that most-accurately shows me blown highlights and blocked shadows on the camera LCD. I usually change the Picture Style to "Standard" in DPP after capture.)
19. Shooting Menu, Tab 3: Long exposure noise reduction: I usually have this option set to "Auto", but my choice varies for the situation.
20. Shooting Menu, Tab 3: High ISO speed noise reduction: Off (noise reduction is destructive to image details - I prefer to add NR sparingly in post)
21. AF Menu, Tab 2: AI Servo 1st image priority: Focus priority (I want the images in focus more than I want the time-priority capture)
22. AF Menu, Tab 2: AI Servo 2nd image priority: Focus priority +2 (same reason)
23. AF Menu, Tab 3: One-Shot AF release priority: Focus priority (same reason)
24. AF Menu, Tab 4: Orientation linked AF point: Separate AF pts: Area + pt
25. Playback Menu, Tab 3: Highlight alert: Enable (flash portions of images that are overexposed)
26. Playback Menu, Tab 3: Histogram disp: RGB (I want to monitor all three color channels for blown or blocked pixels)
27. Playback Menu, Tab 3: Magnification (apx): Actual size (from selected AF point)
28. Setup Menu, Tab 1: Auto rotate: On/Computer only (this provides the largest playback image size on the camera LCD)
29. Setup Menu, Tab 2: VF grid display: Enable
30. Setup Menu, Tab 3: Info button display options: Electronic level only
31. Setup Menu, Tab 4: Custom shooting mode (C1-C3): Auto update set: Enable (see also: Configuring Custom Shooting Modes)
32. Setup Menu, Tab 4: Copyright information: Type name as desired
33. Custom Functions, Tab 1: Bracketing auto cancel: [Off] selected
34. Custom Functions, Tab 2: Custom Controls: Set: Playback; Multicontroller: Direct AF point selection; Default erase option: [Erase] selected
35. Custom Functions, Tab 3: Default erase option: [Erase] selected
36. My Menu: Register the following options: Long exposure noise reduction, Mirror lockup, Format card, Date/Time/Zone (great for monitoring what time it is), Sensor cleaning, Expo.comp./AEB
37. Mount a lens, focus on a subject and adjust the viewfinder diopter (if necessary)

To copy this configuration would mean that you intend to shoot similar to how I shoot – including shooting in RAW-only format. While my setup works great for me, your best use of this list may be for tweaking your own setup.

If you can't remember your own menu setup parameters, keeping an up-to-date list such as this one is a good idea. Anytime your camera goes in for a service visit, the camera will be returned in a reset-to-factory state (unless you request otherwise). Your list will ensure that you do not miss an important setting when putting the camera back into service.

More Information

Canon EOS 5D Mark III