Canon Service Notices (Page 2) RSS Feed for Canon Service Notices

 Thursday, July 5, 2012

Another Canon EOS Rebel T4i Product Advisory from Canon USA:

Thank you for using Canon products.

The front rubber grips of some units of the Canon EOS REBEL T4i Digital SLR camera (EOS 650D/EOS Kiss X6i overseas models) may change color (turn white) after a short period of time. Customer support for this phenomenon is described below.

Canon continuously strives to provide our customers with high quality, reliable products that can be used with confidence. We offer our sincerest apologies to any customers who may be inconvenienced.

Phenomenon

The front rubber grips of some EOS REBEL T4i units produced in certain lots during the sixteen-day period between May 31st through June 15th, 2012 may turn white after a short period of time. We have determined after inquiry with the rubber manufacturer and analysis, that the substance zinc bis (N,N’-dimethyldithiocarbamate) is what causes the rubber surface to turn white.

Zinc bis is not used in the production of this product. However, the quantity of rubber accelerator used in the affected production lots was slightly higher than usual. As a result the rubber grips may turn white due to a chemical reaction with the rubber accelerator and other substances. High temperature and high humidity may contribute to this condition. Zinc bis (N,N’-dimethyldithiocarbamate), which becomes deposited on the rubber surface, is created as a result of this chemical reaction.

Canon EOS Rebel T4i Grip

Affected Product

Some EOS Rebel T4i digital SLR cameras produced from May 31 through June 15 may be affected.

You can use the serial number to check whether your camera is affected by this phenomenon. If the sixth digit of the serial number is "1" please follow the procedure below. If the sixth digit of the serial number is "2" or higher, your camera is not affected.

Procedure:

1) Click on the link below to enter your serial number.

Canon EOS Rebel T4i Serial Number

2) Enter the 12-digit serial number (reference the image below) from your camera then click the Submit button

3) One of the following messages will appear.
· "Your camera is NOT affected" ? No further action is required
· "Your camera is affected" ? Please see the Support section below

Click here to enter your serial number (hint: read this instruction before opening that page)

Caution on Use

The amount of zinc bis (N,N'-dimethyldithiocarbamate) detected during our testing was minimal. While Canon has not received any reports of injury or allergic reactions, depending on one’s health and physical condition, in rare cases when this substance comes into contact with skin, allergic skin reactions* may develop. In addition, if eyes are rubbed after contact with the substance, symptoms, such as red eyes, may develop.

As a precautionary measure, thoroughly wash your hands with water if they have come in contact with the rubber grips that have turned white. (If any medical symptoms develop, please consult your physician immediately.)

*Please note that the occurrence of allergic skin reactions depend on the target substance, length of contact with the target substance, one’s health and physical conditions, and sensitivity of one’s skin structure, and not everyone will be affected by allergic symptoms.

Support

Preparations are underway to provide free repair service for affected cameras by replacement of the rubber grips. Once this repair service is available (ETA of mid July 2012), we will post an update on our web site and also notify registered users via email. Please register your EOS Rebel T4i, so that we can inform you via email when the free repair service will commence.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc.

Contact Information for Inquiries:
Canon Customer Support Center
Phone: 1-855-902-3277 TTD: 1-866-251-3752
E-mail: carecenter@cits.canon.com

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Service Notices
Post Date: 7/5/2012 9:42:10 PM ET   Posted By: Bryan
 Tuesday, July 3, 2012

From Canon USA:

Thank you for using Canon products.

We have identified a phenomenon in which the camera model name embedded in the EXIF data of captured images incorrectly shows “EOS Kiss X6i”, which is the model name for the EOS Rebel T4i in the Japanese market. Even if this occurs, however, the image taken is still captured correctly.

Phenomenon

When using applications, such as Digital Photo Professional (DPP) or Image Browser EX (IBX) to view images captured with your EOS Rebel T4i camera, the camera model name in the EXIF information of the images shows the model name for the same camera in the Japanese market: the EOS Kiss X6i.

The camera model name that appears on the Camera Settings / Remote Shooting screens of EOS Utility (EU) also shows “EOS Kiss X6i”.

Affected Products

EOS REBEL T4i Digital SLR Camera

*Some units whose second digit of the serial number is “3” are affected.

For example: "x3xxxxxxxxxx" ([x] represents any optional number.)

Support

Customers who would like to have the correct model name listed in the EXIF information of their camera are asked to contact Canon using the information below.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Please register your EOS Rebel T4i. By registering, we will be able to notify you via email when service updates are available.

Thank you,
Customer Support Operations
Canon U.S.A., Inc.

Contact Information for Inquiries:
Canon Customer Support Center
Phone: 1-800-OK-CANON
1-800-652-2666 TTD: 1-866-251-3752
E-mail: carecenter@cits.canon.com
For additional support options: http://www.usa.canon.com/support

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Service Notices
Post Date: 7/3/2012 9:29:31 PM ET   Posted By: Bryan
 Thursday, June 28, 2012

From Canon USA:

Thank you for using Canon products.

It has been confirmed that some PowerShot S100 digital cameras encounter a lens error caused by a disconnected part inside the camera. This announcement conveys the details of the issue and Canon’s service policy for affected cameras.

Canon continuously strives to provide our customers with high quality, reliable products that can be used with confidence. We offer our sincerest apologies to any customers who have been inconvenienced.

Phenomenon

Some PowerShot S100 units (with the serial numbers listed below) may encounter a lens error due to a part becoming disconnected inside the lens. In particular, this lens error may occur when the camera is used in certain environmental conditions such as high temperature and/or humidity.

Affected Product

Some PowerShot S100 Digital Cameras within the following serial number range:

The first and second digits of the camera’s serial number are any number from"29" through"41."

For example: "29xxxxxxxxxx", "30xxxxxxxxxx"………"41xxxxxxxxxx"

(The [x] characters shown above represent the remaining characters of the product’s serial number.)

Market Support

Affected products that exhibit this phenomenon will be repaired free of charge, regardless of the warranty status, if it is confirmed that the lens error has been caused by disconnection of the part inside the lens. However, please note that affected products which are received by Canon after their service period ends (the period during which such products are expected to be serviceable), will no longer be eligible for free repair service and will be handled in accordance with Canon's then general repair standards and regulations

Support

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region. Please register your PowerShot S100. By registering, we will be able to notify you via email when future firmware updates become available for download.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Contact Information for Inquiries
Canon Customer Support Center
Phone: 1-800-OK-CANON 1-800-652-2666
TDD: 1-866-251-3752
Email: carecenter@cits.canon.com
For additional support options: www.usa.canon.com/support

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Service Notices
Post Date: 6/28/2012 9:40:37 AM ET   Posted By: Bryan
 Monday, May 14, 2012

From Canon USA:

To Users of the EF200mm f/2L IS USM and EF800mm f/5.6L IS USM Lenses with the Canon EOS 5D Mark III Digital SLR Camera.

Thank you for using Canon products.

We have confirmed that when the EF200mm f/2L IS USM and some units of the EF800mm f/5.6L IS USM lenses are used with the Canon EOS 5D Mark III Digital SLR Camera, the Lenses may emit an abnormal noise.

The Canon EOS 5D Mark III Digital SLR Camera does not need to be repaired as a result of this phenomenon.

The support measures for this phenomenon have been decided and they are as described below.

Phenomenon

If either of the Lenses is attached to the camera with the Image Stabilizer switch on the Lenses set to ON, the Image Stabilizer will synchronize with the autofocusing (AF) function and an abnormal noise may occur. This abnormal noise does not affect captured images.

This phenomenon only occurs when the camera is used with either of the Lenses, and does not occur when the camera is used with other lenses.

Affected Products

EF200mm f/2L IS USM Lens
EF800mm f/5.6L IS USM Lens

*This phenomenon does not occur with cameras other than the EOS 5D Mark III.

*If the fifth and sixth digit of the six-digit alphanumeric number that is imprinted on the lens mount of the above EF lenses is of any of the following numbers, the lens is affected.

EF200mm f/2L IS USM: If the fifth and sixth digit is 00, 01, or 02.
EF800mm f/5.6L IS USM:If the fifth and sixth digit is 00, 01, 02, 03, 04, 05, or 06.

How to Identify Affected Products:

Please check the six-digit alphanumeric number as indicated in the image below.

Canon EF 200mm f/2L IS and EF 800mm f/5.6L IS Service Notice

Support

The Canon Lenses affected by this phenomenon will be inspected and repaired free of charge starting from May 21, 2012. If you own one of the affected lenses, please contact our Customer Support Center.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Contact Information for Inquiries
Canon Customer Support Center
Phone: 1-800-OK-CANON, 1-800-652-2666
TDD: 1-866-251-3752
Email: carecenter@cits.canon.com
For additional support options: www.usa.canon.com/support

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Service Notices
Post Date: 5/14/2012 10:30:03 PM ET   Posted By: Bryan
 Monday, April 23, 2012

Canon USA has issued an EOS 5D Mark III DSLR Camera product advisory.

To Users of the Canon EOS 5D Mark III Digital SLR Camera

Thank you for using Canon products.

Concerning the EOS 5D Mark III digital SLR camera, when the LCD panel illuminates in extremely dark environments, the displayed exposure value may change. Canon has concluded the investigation of this phenomenon, and this announcement informs you of our findings as described below.

Phenomenon

In extremely dark environments, if the LCD panel illuminates, the displayed exposure value may change. However, based on the results of extensive testing this change in exposure value will not noticeably affect the captured image.

Affected Product

Canon EOS 5D Mark III Digital SLR Camera

*Products whose sixth digit in the serial number is 1 or 2 are affected.

For example, “xxxxx1xxxxxx” or “xxxxx2xxxxxx” ([x] represents any optional number.)

Support

Under almost all shooting conditions (including dark environments) this phenomenon will not affect your captured images. However, if you would like Canon to inspect your camera, we will provide this service free of charge upon request beginning in mid-May. Please contact Canon using the information below to request service.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Please register the EOS 5D Mark III. By registering, we will be able to notify you via email when service updates are available. If you already registered, please ensure you are opted-in to receive the notification.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Contact Information for Inquiries
Canon Customer Support Center
Phone: 1-800-OK-CANON or 1-800-652-2666
TDD: 1-866-251-3752
Email: carecenter@cits.canon.com
For additional support options: www.usa.canon.com/support

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Service Notices
Post Date: 4/23/2012 10:45:11 PM ET   Posted By: Bryan
 Wednesday, April 18, 2012

I have not seen anything official yet, but I am receiving multiple reports (thank you for sending them) that Canon Canada and Canon UK are suspending shipments of the new Canon EOS 5D Mark III until the "Light Leak" issue is resolved.

This all seems a bit crazy to me right now. My only thought is that I'm glad that I have my 5D III already.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Service Notices
Post Date: 4/18/2012 8:23:57 PM ET   Posted By: Bryan
 Saturday, April 14, 2012

Canon, Inc. has issued a similar Canon EOS 5D Mark III service notice (Google translation).

Canon, Inc. adds that a "dark environment" is likely to be:

1. If you have installed the body cap

2. If you attach the lens cap

I've been asked if I am going to send my 5D III in for service. My answer was probably, but mostly for resale purposes. But I will not likely send it in anytime soon.

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Service Notices
Post Date: 4/14/2012 9:00:09 AM ET   Posted By: Bryan
 Friday, April 13, 2012

Canon USA has issued a service notice for the Canon EOS 5D Mark III Digital SLR Camera.

To Users of the Canon EOS 5D Mark III Digital SLR Camera

Thank you for using Canon products.

The phenomenon described below has been confirmed when using the Canon EOS 5D Mark III Digital SLR Camera. Canon is now examining the countermeasures and once the countermeasures are decided, we will post the information on our Web site.

Phenomenon

In extremely dark environments, if the LCD panel illuminates, the displayed exposure value may change as a result of the AE sensor’s detection of light from the LCD panel.

Affected Product

Canon EOS 5D Mark III Digital SLR Camera

Support

Once the preparations are complete, we will be making an announcement on our Web site.

This information is for residents of the United States and Puerto Rico only. If you do not reside in the USA or Puerto Rico, please contact the Canon Customer Support Center in your region.

Please register the EOS 5D Mark III. By registering, we will be able to notify you via email when service updates are available. If you already registered, please ensure you are opted-in to receive the notification.

Thank you,
Customer Support Operations
Canon U.S.A., Inc

Contact Information for Inquiries
Canon Customer Support Center
Phone: 1-800-OK-CANON, 1-800-652-2666
TDD: 1-866-251-3752
Email: carecenter@cits.canon.com

For additional support options: www.usa.canon.com/support

 
This service notice is addressing a 5D III anomaly being referred to as the "light leak".

Finding a real world situation where the "light leak" anomaly causes a problem is not easy - I have not encountered any - even when I tried to do so. And, I'm probably using manual exposures if shooting in situations this dark.

Turning off the top LCD panel illumination before metering is the easy workaround (and possibly covering the top LCD if the light source is external).

Share on Facebook! Share on X! Share on Pinterest! Email this page to a friend!
Posted to: Canon News   Category: Canon Service Notices
Post Date: 4/13/2012 4:18:02 PM ET   Posted By: Bryan
< Previous     1 | 2
Archives
2024   Jan   Feb   Mar
2023   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2022   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2021   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2020   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2019   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2018   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2017   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2016   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2015   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2014   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2013   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2012   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2011   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2010   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2009   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2008   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2007   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2006   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
2005   Jan   Feb   Mar   Apr   May   Jun   Jul   Aug   Sep   Oct   Nov   Dec
Terms of Use, Privacy  |  © 2024 Rectangular Media, LLC  |  Bryan CarnathanPowered by Christ!